dragonpilot - 基於 openpilot 的開源駕駛輔助系統
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

38 lines
1.1 KiB

#include "lsm6ds3_temp.h"
#include <cassert>
#include "common/swaglog.h"
#include "common/timing.h"
LSM6DS3_Temp::LSM6DS3_Temp(I2CBus *bus) : I2CSensor(bus) {}
int LSM6DS3_Temp::init() {
int ret = verify_chip_id(LSM6DS3_TEMP_I2C_REG_ID, {LSM6DS3_TEMP_CHIP_ID, LSM6DS3TRC_TEMP_CHIP_ID});
if (ret == -1) return -1;
if (ret == LSM6DS3TRC_TEMP_CHIP_ID) {
source = cereal::SensorEventData::SensorSource::LSM6DS3TRC;
}
return 0;
}
Sensor events splitup (#25714) * PoC of reading sensors via interrupts instead of polling * add Gyro and draft for magn * add more functionality to gpio.cc * change LSM gyro to interrupt * resolve rebase conflict * update BMX accel interrupt impl * add interrupt collector thread to fetch in parallel * change get_event interface to return true on successful read * update BMX gyro interrupt impl * update gpio.h/.cc according to comments * address comments, rename Edgetype enum * Edgetype to EdgeType * update sensor interrupt interface * add error handling, and read fd on trigger * avoid sending empty messages * fix build * use gpiochip * less diff * gpiochip on both edges, but skip falling edge if rising edge is detected * init last_ts with 0 * update sensord testcases * update sensord testsweet * test for pipeline * readd with_process * add null check * move tests update to seperate PR * sensord: improve test coverage (#25683) * update sensord-interrupt testsweet * address review comments * inc stddev threshold * fix format string * add version 0 check again * relax strictness after c3 with bmx tests * relax strictness after tests Co-authored-by: Kurt Nistelberger <kurt.nistelberger@gmail.com> * address PR comments * fix typo * remove 4ms limit, and skip first 0.5sec of data * revert disable_interuppt change to destructor * fix and remove timing skip * make gpiochip generic * sensord port * change from sensorEvents to separated events * fix gyro usage * add splitted sensor tests * modify debug script sensor_data_to_hist.py * refactor get_event interface to remove sensorEvent message type * update locationd to non sensorEvent usage * tmp commit * fix replay * fix accelerometer type * fix sensor to hist debug script * update sensord tests to split events * remove rebase artifacts * port test_sensord.py * small clean up * change cereal to sensorEvents-splitup branch * upate sensorEvents in regen * fix route generation for splitted sensor events * regen cleanUp from sensorEvents change * . * remove light and temp from locationd * add generic init delay per sensor * . * update routes * move bmx gyro/accel to its own channel * adopt sensor tests to bmx channel * remove rebase artifacts * fix sensord test * handle bmx not present * add bmx sockets to regen * . * . * code cleanUp * . * address PR comments * address PR comments * address PR comments * lsm clean up * readd sensorEvents * rever regen.py * . * update replay refs * move channels * fix artifact * bump cereal * update refs * fix timing issue Co-authored-by: Bruce Wayne <batman@workstation-eu-intern2.eu.local> Co-authored-by: gast04 <kurt.nistelberger@gmail.com> Co-authored-by: Willem Melching <willem.melching@gmail.com> Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
3 years ago
bool LSM6DS3_Temp::get_event(MessageBuilder &msg, uint64_t ts) {
uint64_t start_time = nanos_since_boot();
uint8_t buffer[2];
int len = read_register(LSM6DS3_TEMP_I2C_REG_OUT_TEMP_L, buffer, sizeof(buffer));
assert(len == sizeof(buffer));
float scale = (source == cereal::SensorEventData::SensorSource::LSM6DS3TRC) ? 256.0f : 16.0f;
float temp = 25.0f + read_16_bit(buffer[0], buffer[1]) / scale;
Sensor events splitup (#25714) * PoC of reading sensors via interrupts instead of polling * add Gyro and draft for magn * add more functionality to gpio.cc * change LSM gyro to interrupt * resolve rebase conflict * update BMX accel interrupt impl * add interrupt collector thread to fetch in parallel * change get_event interface to return true on successful read * update BMX gyro interrupt impl * update gpio.h/.cc according to comments * address comments, rename Edgetype enum * Edgetype to EdgeType * update sensor interrupt interface * add error handling, and read fd on trigger * avoid sending empty messages * fix build * use gpiochip * less diff * gpiochip on both edges, but skip falling edge if rising edge is detected * init last_ts with 0 * update sensord testcases * update sensord testsweet * test for pipeline * readd with_process * add null check * move tests update to seperate PR * sensord: improve test coverage (#25683) * update sensord-interrupt testsweet * address review comments * inc stddev threshold * fix format string * add version 0 check again * relax strictness after c3 with bmx tests * relax strictness after tests Co-authored-by: Kurt Nistelberger <kurt.nistelberger@gmail.com> * address PR comments * fix typo * remove 4ms limit, and skip first 0.5sec of data * revert disable_interuppt change to destructor * fix and remove timing skip * make gpiochip generic * sensord port * change from sensorEvents to separated events * fix gyro usage * add splitted sensor tests * modify debug script sensor_data_to_hist.py * refactor get_event interface to remove sensorEvent message type * update locationd to non sensorEvent usage * tmp commit * fix replay * fix accelerometer type * fix sensor to hist debug script * update sensord tests to split events * remove rebase artifacts * port test_sensord.py * small clean up * change cereal to sensorEvents-splitup branch * upate sensorEvents in regen * fix route generation for splitted sensor events * regen cleanUp from sensorEvents change * . * remove light and temp from locationd * add generic init delay per sensor * . * update routes * move bmx gyro/accel to its own channel * adopt sensor tests to bmx channel * remove rebase artifacts * fix sensord test * handle bmx not present * add bmx sockets to regen * . * . * code cleanUp * . * address PR comments * address PR comments * address PR comments * lsm clean up * readd sensorEvents * rever regen.py * . * update replay refs * move channels * fix artifact * bump cereal * update refs * fix timing issue Co-authored-by: Bruce Wayne <batman@workstation-eu-intern2.eu.local> Co-authored-by: gast04 <kurt.nistelberger@gmail.com> Co-authored-by: Willem Melching <willem.melching@gmail.com> Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
3 years ago
auto event = msg.initEvent().initTemperatureSensor();
event.setSource(source);
event.setVersion(1);
event.setType(SENSOR_TYPE_AMBIENT_TEMPERATURE);
event.setTimestamp(start_time);
event.setTemperature(temp);
return true;
}