dragonpilot/third_party/android_hardware_libhardware/include/hardware/camera.h

/*
 * Copyright (C) 2010-2011 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef ANDROID_INCLUDE_CAMERA_H
#define ANDROID_INCLUDE_CAMERA_H

#include "camera_common.h"

/**
 * Camera device HAL, initial version [ CAMERA_DEVICE_API_VERSION_1_0 ]
 *
 * DEPRECATED. New devices should use Camera HAL v3.2 or newer.
 *
 * Supports the android.hardware.Camera API, and the android.hardware.camera2
 * API in legacy mode only.
 *
 * Camera devices that support this version of the HAL must return a value in
 * the range HARDWARE_DEVICE_API_VERSION(0,0)-(1,FF) in
 * camera_device_t.common.version. CAMERA_DEVICE_API_VERSION_1_0 is the
 * recommended value.
 *
 * Camera modules that implement version 2.0 or higher of camera_module_t must
 * also return the value of camera_device_t.common.version in
 * camera_info_t.device_version.
 *
 * See camera_common.h for more details.
 */

__BEGIN_DECLS

struct camera_memory;
typedef void (*camera_release_memory)(struct camera_memory *mem);

typedef struct camera_memory {
    void *data;
    size_t size;
    void *handle;
    camera_release_memory release;
} camera_memory_t;

typedef camera_memory_t* (*camera_request_memory)(int fd, size_t buf_size, unsigned int num_bufs,
                                                  void *user);

typedef void (*camera_notify_callback)(int32_t msg_type,
        int32_t ext1,
        int32_t ext2,
        void *user);

typedef void (*camera_data_callback)(int32_t msg_type,
        const camera_memory_t *data, unsigned int index,
        camera_frame_metadata_t *metadata, void *user);

typedef void (*camera_data_timestamp_callback)(int64_t timestamp,
        int32_t msg_type,
        const camera_memory_t *data, unsigned int index,
        void *user);

#define HAL_CAMERA_PREVIEW_WINDOW_TAG 0xcafed00d

typedef struct preview_stream_ops {
    int (*dequeue_buffer)(struct preview_stream_ops* w,
                          buffer_handle_t** buffer, int *stride);
    int (*enqueue_buffer)(struct preview_stream_ops* w,
                buffer_handle_t* buffer);
    int (*cancel_buffer)(struct preview_stream_ops* w,
                buffer_handle_t* buffer);
    int (*set_buffer_count)(struct preview_stream_ops* w, int count);
    int (*set_buffers_geometry)(struct preview_stream_ops* pw,
                int w, int h, int format);
    int (*set_crop)(struct preview_stream_ops *w,
                int left, int top, int right, int bottom);
    int (*set_usage)(struct preview_stream_ops* w, int usage);
    int (*set_swap_interval)(struct preview_stream_ops *w, int interval);
    int (*get_min_undequeued_buffer_count)(const struct preview_stream_ops *w,
                int *count);
    int (*lock_buffer)(struct preview_stream_ops* w,
                buffer_handle_t* buffer);
    // Timestamps are measured in nanoseconds, and must be comparable
    // and monotonically increasing between two frames in the same
    // preview stream. They do not need to be comparable between
    // consecutive or parallel preview streams, cameras, or app runs.
    int (*set_timestamp)(struct preview_stream_ops *w, int64_t timestamp);
} preview_stream_ops_t;

struct camera_device;
typedef struct camera_device_ops {
    /** Set the ANativeWindow to which preview frames are sent */
    int (*set_preview_window)(struct camera_device *,
            struct preview_stream_ops *window);

    /** Set the notification and data callbacks */
    void (*set_callbacks)(struct camera_device *,
            camera_notify_callback notify_cb,
            camera_data_callback data_cb,
            camera_data_timestamp_callback data_cb_timestamp,
            camera_request_memory get_memory,
            void *user);

    /**
     * The following three functions all take a msg_type, which is a bitmask of
     * the messages defined in include/ui/Camera.h
     */

    /**
     * Enable a message, or set of messages.
     */
    void (*enable_msg_type)(struct camera_device *, int32_t msg_type);

    /**
     * Disable a message, or a set of messages.
     *
     * Once received a call to disableMsgType(CAMERA_MSG_VIDEO_FRAME), camera
     * HAL should not rely on its client to call releaseRecordingFrame() to
     * release video recording frames sent out by the cameral HAL before and
     * after the disableMsgType(CAMERA_MSG_VIDEO_FRAME) call. Camera HAL
     * clients must not modify/access any video recording frame after calling
     * disableMsgType(CAMERA_MSG_VIDEO_FRAME).
     */
    void (*disable_msg_type)(struct camera_device *, int32_t msg_type);

    /**
     * Query whether a message, or a set of messages, is enabled.  Note that
     * this is operates as an AND, if any of the messages queried are off, this
     * will return false.
     */
    int (*msg_type_enabled)(struct camera_device *, int32_t msg_type);

    /**
     * Start preview mode.
     */
    int (*start_preview)(struct camera_device *);

    /**
     * Stop a previously started preview.
     */
    void (*stop_preview)(struct camera_device *);

    /**
     * Returns true if preview is enabled.
     */
    int (*preview_enabled)(struct camera_device *);

    /**
     * Request the camera HAL to store meta data or real YUV data in the video
     * buffers sent out via CAMERA_MSG_VIDEO_FRAME for a recording session. If
     * it is not called, the default camera HAL behavior is to store real YUV
     * data in the video buffers.
     *
     * This method should be called before startRecording() in order to be
     * effective.
     *
     * If meta data is stored in the video buffers, it is up to the receiver of
     * the video buffers to interpret the contents and to find the actual frame
     * data with the help of the meta data in the buffer. How this is done is
     * outside of the scope of this method.
     *
     * Some camera HALs may not support storing meta data in the video buffers,
     * but all camera HALs should support storing real YUV data in the video
     * buffers. If the camera HAL does not support storing the meta data in the
     * video buffers when it is requested to do do, INVALID_OPERATION must be
     * returned. It is very useful for the camera HAL to pass meta data rather
     * than the actual frame data directly to the video encoder, since the
     * amount of the uncompressed frame data can be very large if video size is
     * large.
     *
     * @param enable if true to instruct the camera HAL to store
     *        meta data in the video buffers; false to instruct
     *        the camera HAL to store real YUV data in the video
     *        buffers.
     *
     * @return OK on success.
     */
    int (*store_meta_data_in_buffers)(struct camera_device *, int enable);

    /**
     * Start record mode. When a record image is available, a
     * CAMERA_MSG_VIDEO_FRAME message is sent with the corresponding
     * frame. Every record frame must be released by a camera HAL client via
     * releaseRecordingFrame() before the client calls
     * disableMsgType(CAMERA_MSG_VIDEO_FRAME). After the client calls
     * disableMsgType(CAMERA_MSG_VIDEO_FRAME), it is the camera HAL's
     * responsibility to manage the life-cycle of the video recording frames,
     * and the client must not modify/access any video recording frames.
     */
    int (*start_recording)(struct camera_device *);

    /**
     * Stop a previously started recording.
     */
    void (*stop_recording)(struct camera_device *);

    /**
     * Returns true if recording is enabled.
     */
    int (*recording_enabled)(struct camera_device *);

    /**
     * Release a record frame previously returned by CAMERA_MSG_VIDEO_FRAME.
     *
     * It is camera HAL client's responsibility to release video recording
     * frames sent out by the camera HAL before the camera HAL receives a call
     * to disableMsgType(CAMERA_MSG_VIDEO_FRAME). After it receives the call to
     * disableMsgType(CAMERA_MSG_VIDEO_FRAME), it is the camera HAL's
     * responsibility to manage the life-cycle of the video recording frames.
     */
    void (*release_recording_frame)(struct camera_device *,
                    const void *opaque);

    /**
     * Start auto focus, the notification callback routine is called with
     * CAMERA_MSG_FOCUS once when focusing is complete. autoFocus() will be
     * called again if another auto focus is needed.
     */
    int (*auto_focus)(struct camera_device *);

    /**
     * Cancels auto-focus function. If the auto-focus is still in progress,
     * this function will cancel it. Whether the auto-focus is in progress or
     * not, this function will return the focus position to the default.  If
     * the camera does not support auto-focus, this is a no-op.
     */
    int (*cancel_auto_focus)(struct camera_device *);

    /**
     * Take a picture.
     */
    int (*take_picture)(struct camera_device *);

    /**
     * Cancel a picture that was started with takePicture. Calling this method
     * when no picture is being taken is a no-op.
     */
    int (*cancel_picture)(struct camera_device *);

    /**
     * Set the camera parameters. This returns BAD_VALUE if any parameter is
     * invalid or not supported.
     */
    int (*set_parameters)(struct camera_device *, const char *parms);

    /** Retrieve the camera parameters.  The buffer returned by the camera HAL
        must be returned back to it with put_parameters, if put_parameters
        is not NULL.
     */
    char *(*get_parameters)(struct camera_device *);

    /** The camera HAL uses its own memory to pass us the parameters when we
        call get_parameters.  Use this function to return the memory back to
        the camera HAL, if put_parameters is not NULL.  If put_parameters
        is NULL, then you have to use free() to release the memory.
    */
    void (*put_parameters)(struct camera_device *, char *);

    /**
     * Send command to camera driver.
     */
    int (*send_command)(struct camera_device *,
                int32_t cmd, int32_t arg1, int32_t arg2);

    /**
     * Release the hardware resources owned by this object.  Note that this is
     * *not* done in the destructor.
     */
    void (*release)(struct camera_device *);

    /**
     * Dump state of the camera hardware
     */
    int (*dump)(struct camera_device *, int fd);
} camera_device_ops_t;

typedef struct camera_device {
    /**
     * camera_device.common.version must be in the range
     * HARDWARE_DEVICE_API_VERSION(0,0)-(1,FF). CAMERA_DEVICE_API_VERSION_1_0 is
     * recommended.
     */
    hw_device_t common;
    camera_device_ops_t *ops;
    void *priv;
} camera_device_t;

__END_DECLS

#endif /* #ifdef ANDROID_INCLUDE_CAMERA_H */