dragonpilot - 基於 openpilot 的開源駕駛輔助系統
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

51 lines
1.3 KiB

#include "i2c_sensor.h"
int16_t read_12_bit(uint8_t lsb, uint8_t msb) {
uint16_t combined = (uint16_t(msb) << 8) | uint16_t(lsb & 0xF0);
return int16_t(combined) / (1 << 4);
}
int16_t read_16_bit(uint8_t lsb, uint8_t msb) {
uint16_t combined = (uint16_t(msb) << 8) | uint16_t(lsb);
return int16_t(combined);
}
int32_t read_20_bit(uint8_t b2, uint8_t b1, uint8_t b0) {
uint32_t combined = (uint32_t(b0) << 16) | (uint32_t(b1) << 8) | uint32_t(b2);
return int32_t(combined) / (1 << 4);
}
Sensor events splitup (#25714) * PoC of reading sensors via interrupts instead of polling * add Gyro and draft for magn * add more functionality to gpio.cc * change LSM gyro to interrupt * resolve rebase conflict * update BMX accel interrupt impl * add interrupt collector thread to fetch in parallel * change get_event interface to return true on successful read * update BMX gyro interrupt impl * update gpio.h/.cc according to comments * address comments, rename Edgetype enum * Edgetype to EdgeType * update sensor interrupt interface * add error handling, and read fd on trigger * avoid sending empty messages * fix build * use gpiochip * less diff * gpiochip on both edges, but skip falling edge if rising edge is detected * init last_ts with 0 * update sensord testcases * update sensord testsweet * test for pipeline * readd with_process * add null check * move tests update to seperate PR * sensord: improve test coverage (#25683) * update sensord-interrupt testsweet * address review comments * inc stddev threshold * fix format string * add version 0 check again * relax strictness after c3 with bmx tests * relax strictness after tests Co-authored-by: Kurt Nistelberger <kurt.nistelberger@gmail.com> * address PR comments * fix typo * remove 4ms limit, and skip first 0.5sec of data * revert disable_interuppt change to destructor * fix and remove timing skip * make gpiochip generic * sensord port * change from sensorEvents to separated events * fix gyro usage * add splitted sensor tests * modify debug script sensor_data_to_hist.py * refactor get_event interface to remove sensorEvent message type * update locationd to non sensorEvent usage * tmp commit * fix replay * fix accelerometer type * fix sensor to hist debug script * update sensord tests to split events * remove rebase artifacts * port test_sensord.py * small clean up * change cereal to sensorEvents-splitup branch * upate sensorEvents in regen * fix route generation for splitted sensor events * regen cleanUp from sensorEvents change * . * remove light and temp from locationd * add generic init delay per sensor * . * update routes * move bmx gyro/accel to its own channel * adopt sensor tests to bmx channel * remove rebase artifacts * fix sensord test * handle bmx not present * add bmx sockets to regen * . * . * code cleanUp * . * address PR comments * address PR comments * address PR comments * lsm clean up * readd sensorEvents * rever regen.py * . * update replay refs * move channels * fix artifact * bump cereal * update refs * fix timing issue Co-authored-by: Bruce Wayne <batman@workstation-eu-intern2.eu.local> Co-authored-by: gast04 <kurt.nistelberger@gmail.com> Co-authored-by: Willem Melching <willem.melching@gmail.com> Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
3 years ago
I2CSensor::I2CSensor(I2CBus *bus, int gpio_nr, bool shared_gpio) :
bus(bus), gpio_nr(gpio_nr), shared_gpio(shared_gpio) {}
I2CSensor::~I2CSensor() {
if (gpio_fd != -1) {
close(gpio_fd);
}
}
int I2CSensor::read_register(uint register_address, uint8_t *buffer, uint8_t len) {
return bus->read_register(get_device_address(), register_address, buffer, len);
}
int I2CSensor::set_register(uint register_address, uint8_t data) {
return bus->set_register(get_device_address(), register_address, data);
}
int I2CSensor::init_gpio() {
if (shared_gpio || gpio_nr == 0) {
return 0;
}
gpio_fd = gpiochip_get_ro_value_fd("sensord", GPIOCHIP_INT, gpio_nr);
if (gpio_fd < 0) {
return -1;
}
return 0;
}
bool I2CSensor::has_interrupt_enabled() {
return gpio_nr != 0;
}