* Hyundai: Car Port for Staria 2023
* camera scc!
* add test route
* Update RELEASES.md
* Apply suggestions from code review
* bump down max torque
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* HKG: Car Port for Kia Niro Plug-in Hybrid 2022
* Update CARS.md and add test route
* add to releases
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* added GSF ECU values
* Added Lexus GSF data
* added route for GSF
* test RC code
* revert fingerprints back from RC test to GSF
* fixed type for route
* specify route segment for GSF
* added GSF to torque substitute
* removed year designation for GSF
* added MY back to all "Lexus GSF"
* removed route, don't think it does anything
* move GSF ecu values to better place
* remove whitespace from toyota > interface.py
* added in public route for LEXUS_GSF
* added GSF to docs
* update test route
* update test route
* update 266 Supported cars
* trying different dbc
* updated to working route
* clean up
* add to releases
* updated test route
* new route
* docs
* slightly better torque params
---------
Co-authored-by: cchui <cchui@eogresources.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* Hyundai: Add FW Versions for 2019 Elantra
* wrong platform
* Update selfdrive/car/hyundai/values.py
* split platforms again
* add engine and other trans
* legacy: don't trust long
* fix
* elantra has no eps and i30 has no dates as well
* 19 still has no sng
* new harness
* todo comment
* Update CARS.md
* re-did
* add back
* rev
* Add Elantra 2017 FW from f6f9e1708bae2ef6
* Add Elantra 2017 FW from 5af39b105269f0f3
* Add Elantra 2017 FW from 2e158bb0e7396dd9
* should be all i30 and elantra drivers
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* add CADILLAC ESCALADE ESV PLATINUM 2019
* add test route
* Update selfdrive/car/gm/interface.py
* combine params
* that's just a trim
* wow, there's a huge torque offset (left is 1.2 m/s^2, right is 1.9 m/s^2 max lat accel)
* don't hard code
* Update selfdrive/car/torque_data/override.yaml
* consistent formatting
* add to releases
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* combine corolla
* corolla tss2: remove duplicates
* remove gas pedal hybrid signal
* combine RX TSS2
* we only split for static DSU msgs, or sng differences
* Combine NX TSS2
* remove nb
* Combine ES TSS2
* Combine RAV4 TSS2 (torque params for each EPS variant are similar enough, and eps and fwdcamera all are identical)
* Merge TSS-P Lexus NX
* TSS-P Lexus NX: remove duplicates
* TSS-P C-HR: merge
* TSS-P C-HR: remove duplicates
* fix routes
* re-did everything: no diff 🎉
* update test models seg list
* Update ref_commit
* HKG: Car Port for Hyundai Cusitn 1st Gen
Hyundai Custin is asia only car ,named Custo in China.
Hyundai K , talk with Sotana CAN BUS
test route"0bbe367c98fa1538|2023-08-19--01-58-42--0"
It's my fisrt time to PR a port car. I must miss something I don't know. Waiting your instruction to complete it.
* Add route
Add route
* update interface.py
Add interface values
* Update values.py
type
* slight cleanup
* stock openpilot route
* Add credit to release note
* lkas11 fault fix
* Generate CARS.md
* SCC is standard
* crc8
* Update new route
Add a new route "0bbe367c98fa1538|2023-09-16--00-16-49--0"
* sort
* Update selfdrive/car/hyundai/interface.py
* rename platform var
* we want abs!
* was looking at a vw lol
* 096
---------
Co-authored-by: Jason Wen <haibin.wen3@gmail.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* add 2019 OptimaH
* fix
* fix gears
* rename
* should be in unsup long
* fix
* probable cause
* add test route
* update docs
* fix test
* spacing
* note it's only old
* use torque for 2023 RAV4s that allow it
* FW
* better cmt
* better
* better values comment
* switch
* add torque params
* simpler
* better to use steerControlType
* ???
* fix condition
* adjust params
* pid is only for old cars
* add comment
* move comment up
* one if
fix
* invert
* better comment
* better here
* for
* add torque hybrid test route
* fix condition
* this might be simpler
* back to one if
fix
* better name
* other way
* this reads so much better
* last change
* better
* did i break ci?
* HKG: Car Port for Kia K8 2023 (HDA2)
* Fix release docs
* add test route
* engaged segment
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* Hyundai: Car Port for Azera 2022
* harness k
* not crc8
* use gen
* add test route
* Middle East only
* Revert "Middle East only"
This reverts commit 1abe795ad00d10344761e99f415a1cfc14f4c163.
* rename to 6th gen
* sorting
* has a little less torque
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* Hyundai: Car Port for Kona EV 2nd Generation (2023 Korean Ver.)
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* gate with flag
* new blinker signals for 2nd Gen Kona
* add test route
* Update CARS.md
* bump opendbc
* match opendbc definition
* Attempt to block laneline information to suppress LFA
* Try 0x364
* Block 0x364|BYTE7
* Block all bus 2/6 messages
* Lowercase to match DBC
* Aight
* we don't use this
* Final test to block LFA
* No byte 7
* Fix
* Fix tx
* cleanup
* HDA2 support
* Update RELEASES.md
* bump opendbc
* from `liveTorqueParameters`
* add test route
* bump panda
* official spec
* Check for new LKAS addr instead
* Update comment
* sync with dbc
* Combine LFA suppress can sends
* bump opendbc
* Add new tx to unit test
* linter
* Consolidate
* rename and update torque params
* add note for blinker weirdness
* bump
* bump
* clean up block msg
* it uses LFA if long
* not used in multiple places
* bump panda
* correct name
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* Add support for Forester Hybrid 2020
Co-authored-by: martinl <martin@mlp.ee>
* it's a param now
* make it work
* fix
* merge and cleanup
* remove duplicate
* should be forester
* bump submodules
* should be abs
* add missing params
* still need a test route
* still need a test route
* consitent
* here too
* todo
* more
* Update selfdrive/car/tests/routes.py
* clean up
---------
Co-authored-by: martinl <martin@mlp.ee>
Co-authored-by: Justin Newberry <jnewberry0502@gmail.com>
* Subaru: Crosstrek Hybrid support
* hybrid cars in dashcam only
* revert that
* just dashcam
* tah should be abs
* remove unused import
* use the old dbc for now
* hybrid car exceptions in carstate
* need dashstatus until we get a proper cruiseactivated bit
* missing CP
* merge conflicts
* lets be consistent about extend
* cleanup
* fix and comments
* preglobal fix
* and the rest
* and this
* added hybrid to release
---------
Co-authored-by: Justin Newberry <justin@comma.ai>
* HKG: Car Port for Kia Sorento Hybrid 2023
* Update CARS.md
* Oops
* add test route
* specify segment
* all packages
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* HKG: Car Port for Kia Carnival (China only) 2023 (HDA1)
* add FW
* seems to be radar SCC
* Update CARS.md
* Update CARS.md
* Add test route
* Fix docs
* New route
* Fix docs formatting
* update with US model
* 2 total
* Update RELEASES.md
* add FW for US carnival 2023
* fix docs
* update test routes
* no rlogs for chinese route
* update docs
* revert chinese to merge now
* Apply suggestions from code review
* fine to fully remove
* less precise
* remove from releases
* Apply suggestions from code review
* Update selfdrive/car/tests/routes.py
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* Update values.py
* Update values.py
* Update routes.py
* Update values.py
* Update values.py
* Update interface.py
* Update override.yaml
* Updated car name in torque settings to the correct one
* Removed unused ECU's from GV80
Fix AssertionError: 3 != 0 : GENESIS GV80 2023: Car model has ECUs not in auxiliary request whitelists: Ecu.eps, Ecu.transmission, Ecu.engine
* Update routes.py
Updated to a better route
* Update routes.py
* Update test_models.py
* Update test_models.py
* Hopefully this route will work...
* Update selfdrive/car/hyundai/values.py
* Update selfdrive/car/hyundai/values.py
* this could use some cargo
* don't need to combine just yet
* add to docs and releases
* Update routes.py
* Update RELEASES.md
* Update routes.py
Updated route, hopefully this one works...
* Update selfdrive/car/tests/routes.py
* alphabetical
* update docs
* Update routes.py
Hopefully this route works
* Update routes.py
Trying segment 1 for GV80
* bump
* no need
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
Co-authored-by: Cameron Clough <cameronjclough@gmail.com>
* initial commit
* HR-V is diff enought to split from Civic22
* Add US HR-V 2023
* update CARS.md
* Update RELEASES.md
* Use a alternative brake signal
* US HR-V have a weird noise in the BrakeSwitch
* Shane tunning
* this is added automatically
* sorry jyoung
* civic22_stop_faster
limit stopAccel to current safety model
* relax calib temporarily (12 deg)
relax calib temporarily (10 deg)
* compute accel (car overshoots requests at low speed)
* revert brake pressed caused controls mismatches
* fix crash
* cause a cruise fault
* Revert "cause a cruise fault"
This reverts commit 09a6469ac6fc38ebd38dd1c5d464712a15d0fde1.
* no brake error
* use alt brake
* Update selfdrive/car/honda/carcontroller.py
* change HONDA_BOSCH_ALT_BRAKE_SIGNAL to CP.flags
* Revert "change HONDA_BOSCH_ALT_BRAKE_SIGNAL to CP.flags"
This reverts commit e0f8123b33db3218f27c4b64a7b2a0b1f740860f.
* remove FPv2 from brazilian HR-V
* bump panda
* fix a bug
* revert calib threshold
* new test route
* separate pr
* update
* update that
* thought i removed this
* revert steer ratio
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* add ES 2018
* standard
* add FW versions
* need to add a route
* verified
* add to DSU messages
* add to torque params
* older lexus do not have all-speed dynamic radar cruise control
* update docs
* Update selfdrive/car/toyota/values.py
* add CI route
* update docs
* add to releases
* assume no stop and go (can't know without dsu unplugged)
* Update selfdrive/car/toyota/values.py
* update docs
* update docs
* Add trailblazer support
* Update routes.py
* Update routes.py
* Update CARS.md
* Fix incorrect torque name
* Update values.py and CARS.md
* Change to update another route
* update docs
* only 2021 https://en.wikipedia.org/wiki/Chevrolet_Trailblazer_(crossover)
only 2021
* new FP with missing addrs
* Update selfdrive/car/gm/interface.py
* tune the torque params
* update docs
* remove as a new platform
* Revert "remove as a new platform"
This reverts commit c9c65f29dbb1e1a5926540bb75433928325d6c0e.
* add comment and comment out FP
* need it to be in all_known_cars to test_model
* add to releases
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* Update values.py for 2023 Kia Niro EV
* Update interface.py for 2023 Kia Niro EV
* Update params.yaml for 2023 Kia Niro EV
* Update RELEASES.md for 2023 Kia Niro EV
* Update interface.py for 2023 Kia Niro EV
* Update routes.py for 2023 Kia Niro EV
* Update CARS.md for 2023 Kia Niro EV
* Update CARS.md for 2023 Kia Niro EV
* Put 2023 Kia Niro EV in CANFD_RADAR_SCC_CAR
* New values in params.yaml for 2023 Kia Niro EV
* Rollback - Remove CAR.KIA_NIRO_EV_2ND_GEN from CANFD_RADAR_SCC_CAR
* Update routes.py for 2023 Kia Niro EV
* Apply suggestions from code review
* use new route
* update cars
* test
* pass test
* add params, rename
* use average
use average
use average
use average
* around 2.05
* Update selfdrive/car/hyundai/interface.py
* Update selfdrive/car/hyundai/interface.py
* lower
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* test out lta message
* correctly send
* percentage is percentage driver isn't overriding
* closer to stock system
* should be able to send LTA at 100hz, counter is the same as LKA
* small amount of torque towards desired
* Offset commanded torque correctly
* Too little torque
* use car's SETME's
* Revert "use car's SETME's"
This reverts commit c88856969995f97cc5ec4e2b24a5cc4e3ef4721a.
* try cutting steer every second
* Didn't seem to matter
This reverts commit 6923498b2a9eed8beb3998f441899f1df4948f6f.
* steer to 0
* let packer set counter
* add for camry
* log steer faults
* comments
* bump opendbc
* add opParams
* add lta safety
* set safety param
* fix torque control bug
* bump panda
* fix missing signal
* [experiment] apply some rate limiting and anti-windup
* no faults, clip to 90 deg, decent torque blending
* clean up blending
* toyota angle rate limits
* use std angle limits
* assert we only add angle control to TSS2 cars
* clean up carcontroller a bit
* space space
* bump opendbc
* clean up toyotacan from opendbc change
* bump panda
* will tests run?
* steer at zero
* refactor angle to use LatControlPID with zero gains
* stop some faults and tuning
* possibly fix integral wind up at max torque
* Add 2023 rav4
* limit torque inside EPS when overriding (no huge windup in edge cases when overriding)
* fix wind up issue after turns (or prolonged saturation)
* this doesn't work that well
* try these limits
* try this
* log the angle!
* global variable
* Apply suggestions from code review
* clip angle to 3 m/s/s
* some tolerance for roll
* raise limits a bit
* bumppanda
* fix faults
* still not good
* offsetting causing hugging?
* Revert "offsetting causing hugging?"
This reverts commit a42ec0b772ed74a1fd54b7fef2e7c275a3e8333b.
* reduce kp
* class var not needed
* limit up angle delta
* fix saturation check
* feedforward includes offset
* some threshold for roll
* bump panda
* surely we don't need this
* test stuff
* Toyota: Add FW for 2023 RAV4 Hybrid (#27494)
* Toyota: Add FW for 2023 RAV4 Hybrid
* Set RAVH_TSS2_2022 to use angle SteerControlType
* bump panda
* remove extras
* Revert "remove extras"
This reverts commit 87378e734915c107f57f99a5feef4dcb2b2a9a37.
* no max angle limit for now
* add as separate platforms
* remove debug scripts
* revert to master
* remove these FW versions from 2022
* dashcam these cars :(
* fix test
* interface
* add to untested routes
* never send torque with LTA cars
* fix values
* clean up controlsd
* reset lat control files
* use the car param
* add to params
* bump panda to master
* Update selfdrive/car/toyota/carcontroller.py
* don't set torque params if angle control (fixes controlsd bug)
* reset controlsd
* keyword
* in another pr
* simplify test
* rm line
* Update selfdrive/car/toyota/tests/test_toyota.py
---------
Co-authored-by: crispbee <84819466+crispbee@users.noreply.github.com>
* HKG: Car Port for Kia Niro Hybrid 2023 (HDA1)
* bump opendbc
* bump
* Found gear signal
* Only set one flag
* bump opendbc
* Update CARS.md
* Update routes.py
* bump opendbc
* Update CARS.md
* some values cleanup
* new route with rlogs
* set from data
* merge
(3854+3391+3227+3336)/4
* fine move back down here for now
fine move back down here for now
* Update selfdrive/car/hyundai/interface.py
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* increase chrysler steer rate
* use torque control
* update offline values for chrysler, jeep
* bump panda
* add blacklist
* add lag buffer to the torque vals
---------
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* HKG: Car Port for Kia K5 Hybrid 2020
* Add test route (Experimental Mode)
* No abs
* remove extra trans
* move up
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* VW MNB: Volkswagen Crafter Mk2
* Crafter has a min steer speed :(
* add to non_tested_cars for now
* autogratitude
* Revert "autogratitude"
This reverts commit 8f19085bfa3424a8a75d7c95f32be8ecb010f8f4.
* autogratitude
* regen docs
Isaac
Jason Wen
Vivek Aithal
Calvin Chui
Shane Smiskol
Tim Wilson
Saber
Hoya
martinl
Adeeb Shihadeh
LC
Justin Newberry
Cameron Clough
JWingate80
AlexandreSato
Yong-seok, Jang
Josselin Lecocq
koch-cf
Jason Young
Ricky Gilleland
Manu
Jason Wen