open source driving agent
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

189 lines
8.7 KiB

from cereal import car
from common.conversions import Conversions as CV
from common.numpy_fast import clip
from common.realtime import DT_CTRL
from opendbc.can.packer import CANPacker
from selfdrive.car import apply_std_steer_torque_limits
from selfdrive.car.hyundai import hyundaicanfd, hyundaican
Hyundai: Car Port for Tucson Hybrid 2022 (#25276) * Hyundai: Car Port for Tucson Hybrid 2022 * Update RELEASES.md * Init gear_msg at the top * FW versions from script * Button send attempt * start with some cleanup * Send button fixed bits * Define all bytes and only send PAUSE/RESUME * Use CRUISE_INFO to cancel cruise and resume * 8-bit counter * Cleanup ish * 8 bit counter * Send at 20ms * Disengage bits * Revert bump submodules * Allow tx on 0x1a0 * Fix byte counts * Send LFA and HDA icons based on engageability * Send cruise buttons only on HDA2 cars for now * Add comments * Add FLAG_HYUNDAI_CANFD_HDA2 flag * Update interface.py * Update carstate.py * Update carstate.py * Update carstate.py * Bump submodules * Bump panda * Bump opendbc * Allow tx with CRUISE_INACTIVE * GEAR has 24 bytes only * Generate car docs * Fix CRUISE_INFO copy * Remove unused class * Add CAN-FD busses to unit test * Bump opendbc * Revert "Add CAN-FD busses to unit test" This reverts commit 2f751640408a7f73a9100947cbd95ea13fbb8a48. * Remove duplicate * New tune based on data * Panda safety cleanup * Include bus 0 in rx checks * Missed one * bus 6 check * Remove redundant check * Add comments * Bump opendbc * Sync with DBC * Hide LFA icon when disengaged * Little endian * fix comment * more conditions in carcontroller * update pedal signal * update tuning * cleanup carcontroller * bump panda * fix mismatch * alt buttons * little more cleanup * update refs for EV6 new safety param * bump panda Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com> old-commit-hash: bd5e28909f4576699717f8a2f6751f0d9fdfecc0
3 years ago
from selfdrive.car.hyundai.values import HyundaiFlags, Buttons, CarControllerParams, CANFD_CAR, CAR
VisualAlert = car.CarControl.HUDControl.VisualAlert
LongCtrlState = car.CarControl.Actuators.LongControlState
# EPS faults if you apply torque while the steering angle is above 90 degrees for more than 1 second
# All slightly below EPS thresholds to avoid fault
MAX_ANGLE = 85
MAX_ANGLE_FRAMES = 89
MAX_ANGLE_CONSECUTIVE_FRAMES = 2
def process_hud_alert(enabled, fingerprint, hud_control):
sys_warning = (hud_control.visualAlert in (VisualAlert.steerRequired, VisualAlert.ldw))
# initialize to no line visible
# TODO: this is not accurate for all cars
sys_state = 1
if hud_control.leftLaneVisible and hud_control.rightLaneVisible or sys_warning: # HUD alert only display when LKAS status is active
sys_state = 3 if enabled or sys_warning else 4
elif hud_control.leftLaneVisible:
sys_state = 5
elif hud_control.rightLaneVisible:
sys_state = 6
# initialize to no warnings
left_lane_warning = 0
right_lane_warning = 0
if hud_control.leftLaneDepart:
left_lane_warning = 1 if fingerprint in (CAR.GENESIS_G90, CAR.GENESIS_G80) else 2
if hud_control.rightLaneDepart:
right_lane_warning = 1 if fingerprint in (CAR.GENESIS_G90, CAR.GENESIS_G80) else 2
return sys_warning, sys_state, left_lane_warning, right_lane_warning
class CarController:
def __init__(self, dbc_name, CP, VM):
self.CP = CP
self.params = CarControllerParams(CP)
self.packer = CANPacker(dbc_name)
self.angle_limit_counter = 0
self.frame = 0
self.apply_steer_last = 0
self.car_fingerprint = CP.carFingerprint
self.last_button_frame = 0
def update(self, CC, CS):
actuators = CC.actuators
hud_control = CC.hudControl
# steering torque
steer = actuators.steer
if self.CP.carFingerprint in (CAR.KONA, CAR.KONA_EV, CAR.KONA_HEV, CAR.KONA_EV_2022):
# these cars have significantly more torque than most HKG; limit to 70% of max
steer = clip(steer, -0.7, 0.7)
new_steer = int(round(steer * self.params.STEER_MAX))
apply_steer = apply_std_steer_torque_limits(new_steer, self.apply_steer_last, CS.out.steeringTorque, self.params)
if not CC.latActive:
apply_steer = 0
self.apply_steer_last = apply_steer
# accel + longitudinal
accel = clip(actuators.accel, CarControllerParams.ACCEL_MIN, CarControllerParams.ACCEL_MAX)
stopping = actuators.longControlState == LongCtrlState.stopping
set_speed_in_units = hud_control.setSpeed * (CV.MS_TO_KPH if CS.is_metric else CV.MS_TO_MPH)
# HUD messages
sys_warning, sys_state, left_lane_warning, right_lane_warning = process_hud_alert(CC.enabled, self.car_fingerprint,
hud_control)
can_sends = []
# *** common hyundai stuff ***
# tester present - w/ no response (keeps relevant ECU disabled)
if self.frame % 100 == 0 and self.CP.openpilotLongitudinalControl:
addr, bus = 0x7d0, 0
if self.CP.flags & HyundaiFlags.CANFD_HDA2.value:
addr, bus = 0x730, 5
can_sends.append([addr, 0, b"\x02\x3E\x80\x00\x00\x00\x00\x00", bus])
# CAN-FD platforms
if self.CP.carFingerprint in CANFD_CAR:
hda2 = self.CP.flags & HyundaiFlags.CANFD_HDA2
hda2_long = hda2 and self.CP.openpilotLongitudinalControl
# steering control
can_sends.extend(hyundaicanfd.create_steering_messages(self.packer, self.CP, CC.enabled, CC.latActive, apply_steer))
# disable LFA on HDA2
if self.frame % 5 == 0 and hda2:
can_sends.append(hyundaicanfd.create_cam_0x2a4(self.packer, CS.cam_0x2a4))
Hyundai: Car Port for Tucson Hybrid 2022 (#25276) * Hyundai: Car Port for Tucson Hybrid 2022 * Update RELEASES.md * Init gear_msg at the top * FW versions from script * Button send attempt * start with some cleanup * Send button fixed bits * Define all bytes and only send PAUSE/RESUME * Use CRUISE_INFO to cancel cruise and resume * 8-bit counter * Cleanup ish * 8 bit counter * Send at 20ms * Disengage bits * Revert bump submodules * Allow tx on 0x1a0 * Fix byte counts * Send LFA and HDA icons based on engageability * Send cruise buttons only on HDA2 cars for now * Add comments * Add FLAG_HYUNDAI_CANFD_HDA2 flag * Update interface.py * Update carstate.py * Update carstate.py * Update carstate.py * Bump submodules * Bump panda * Bump opendbc * Allow tx with CRUISE_INACTIVE * GEAR has 24 bytes only * Generate car docs * Fix CRUISE_INFO copy * Remove unused class * Add CAN-FD busses to unit test * Bump opendbc * Revert "Add CAN-FD busses to unit test" This reverts commit 2f751640408a7f73a9100947cbd95ea13fbb8a48. * Remove duplicate * New tune based on data * Panda safety cleanup * Include bus 0 in rx checks * Missed one * bus 6 check * Remove redundant check * Add comments * Bump opendbc * Sync with DBC * Hide LFA icon when disengaged * Little endian * fix comment * more conditions in carcontroller * update pedal signal * update tuning * cleanup carcontroller * bump panda * fix mismatch * alt buttons * little more cleanup * update refs for EV6 new safety param * bump panda Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com> old-commit-hash: bd5e28909f4576699717f8a2f6751f0d9fdfecc0
3 years ago
# LFA and HDA icons
if self.frame % 5 == 0 and (not hda2 or hda2_long):
can_sends.append(hyundaicanfd.create_lfahda_cluster(self.packer, self.CP, CC.enabled))
Hyundai: Car Port for Tucson Hybrid 2022 (#25276) * Hyundai: Car Port for Tucson Hybrid 2022 * Update RELEASES.md * Init gear_msg at the top * FW versions from script * Button send attempt * start with some cleanup * Send button fixed bits * Define all bytes and only send PAUSE/RESUME * Use CRUISE_INFO to cancel cruise and resume * 8-bit counter * Cleanup ish * 8 bit counter * Send at 20ms * Disengage bits * Revert bump submodules * Allow tx on 0x1a0 * Fix byte counts * Send LFA and HDA icons based on engageability * Send cruise buttons only on HDA2 cars for now * Add comments * Add FLAG_HYUNDAI_CANFD_HDA2 flag * Update interface.py * Update carstate.py * Update carstate.py * Update carstate.py * Bump submodules * Bump panda * Bump opendbc * Allow tx with CRUISE_INACTIVE * GEAR has 24 bytes only * Generate car docs * Fix CRUISE_INFO copy * Remove unused class * Add CAN-FD busses to unit test * Bump opendbc * Revert "Add CAN-FD busses to unit test" This reverts commit 2f751640408a7f73a9100947cbd95ea13fbb8a48. * Remove duplicate * New tune based on data * Panda safety cleanup * Include bus 0 in rx checks * Missed one * bus 6 check * Remove redundant check * Add comments * Bump opendbc * Sync with DBC * Hide LFA icon when disengaged * Little endian * fix comment * more conditions in carcontroller * update pedal signal * update tuning * cleanup carcontroller * bump panda * fix mismatch * alt buttons * little more cleanup * update refs for EV6 new safety param * bump panda Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com> old-commit-hash: bd5e28909f4576699717f8a2f6751f0d9fdfecc0
3 years ago
if self.CP.openpilotLongitudinalControl:
can_sends.extend(hyundaicanfd.create_adrv_messages(self.packer, self.frame))
if self.frame % 2 == 0:
can_sends.append(hyundaicanfd.create_acc_control(self.packer, self.CP, CC.enabled, accel, stopping, CC.cruiseControl.override,
set_speed_in_units))
else:
# button presses
if (self.frame - self.last_button_frame) * DT_CTRL > 0.25:
# cruise cancel
if CC.cruiseControl.cancel:
if self.CP.flags & HyundaiFlags.CANFD_ALT_BUTTONS:
can_sends.append(hyundaicanfd.create_acc_cancel(self.packer, self.CP, CS.cruise_info))
self.last_button_frame = self.frame
else:
for _ in range(20):
can_sends.append(hyundaicanfd.create_buttons(self.packer, CS.buttons_counter+1, Buttons.CANCEL))
self.last_button_frame = self.frame
# cruise standstill resume
elif CC.cruiseControl.resume:
if not (self.CP.flags & HyundaiFlags.CANFD_ALT_BUTTONS):
for _ in range(20):
can_sends.append(hyundaicanfd.create_buttons(self.packer, CS.buttons_counter+1, Buttons.RES_ACCEL))
self.last_button_frame = self.frame
else:
# Count up to MAX_ANGLE_FRAMES, at which point we need to cut torque to avoid a steering fault
if CC.latActive and abs(CS.out.steeringAngleDeg) >= MAX_ANGLE:
self.angle_limit_counter += 1
else:
self.angle_limit_counter = 0
# Cut steer actuation bit for two frames and hold torque with induced temporary fault
torque_fault = CC.latActive and self.angle_limit_counter > MAX_ANGLE_FRAMES
lat_active = CC.latActive and not torque_fault
if self.angle_limit_counter >= MAX_ANGLE_FRAMES + MAX_ANGLE_CONSECUTIVE_FRAMES:
self.angle_limit_counter = 0
can_sends.append(hyundaican.create_lkas11(self.packer, self.frame, self.car_fingerprint, apply_steer, lat_active,
torque_fault, CS.lkas11, sys_warning, sys_state, CC.enabled,
hud_control.leftLaneVisible, hud_control.rightLaneVisible,
left_lane_warning, right_lane_warning))
if not self.CP.openpilotLongitudinalControl:
if CC.cruiseControl.cancel:
can_sends.append(hyundaican.create_clu11(self.packer, self.frame, CS.clu11, Buttons.CANCEL, self.CP.carFingerprint))
elif CC.cruiseControl.resume:
# send resume at a max freq of 10Hz
if (self.frame - self.last_button_frame) * DT_CTRL > 0.1:
# send 25 messages at a time to increases the likelihood of resume being accepted
can_sends.extend([hyundaican.create_clu11(self.packer, self.frame, CS.clu11, Buttons.RES_ACCEL, self.CP.carFingerprint)] * 25)
self.last_button_frame = self.frame
if self.frame % 2 == 0 and self.CP.openpilotLongitudinalControl:
# TODO: unclear if this is needed
jerk = 3.0 if actuators.longControlState == LongCtrlState.pid else 1.0
can_sends.extend(hyundaican.create_acc_commands(self.packer, CC.enabled, accel, jerk, int(self.frame / 2),
hud_control.leadVisible, set_speed_in_units, stopping, CC.cruiseControl.override))
# 20 Hz LFA MFA message
if self.frame % 5 == 0 and self.car_fingerprint in (CAR.SONATA, CAR.PALISADE, CAR.IONIQ, CAR.KIA_NIRO_EV, CAR.KIA_NIRO_HEV_2021,
CAR.IONIQ_EV_2020, CAR.IONIQ_PHEV, CAR.KIA_CEED, CAR.KIA_SELTOS, CAR.KONA_EV, CAR.KONA_EV_2022,
CAR.ELANTRA_2021, CAR.ELANTRA_HEV_2021, CAR.SONATA_HYBRID, CAR.KONA_HEV, CAR.SANTA_FE_2022,
CAR.KIA_K5_2021, CAR.IONIQ_HEV_2022, CAR.SANTA_FE_HEV_2022, CAR.GENESIS_G70_2020, CAR.SANTA_FE_PHEV_2022):
can_sends.append(hyundaican.create_lfahda_mfc(self.packer, CC.enabled))
# 5 Hz ACC options
if self.frame % 20 == 0 and self.CP.openpilotLongitudinalControl:
can_sends.extend(hyundaican.create_acc_opt(self.packer))
# 2 Hz front radar options
if self.frame % 50 == 0 and self.CP.openpilotLongitudinalControl:
can_sends.append(hyundaican.create_frt_radar_opt(self.packer))
new_actuators = actuators.copy()
new_actuators.steer = apply_steer / self.params.STEER_MAX
new_actuators.accel = accel
self.frame += 1
return new_actuators, can_sends