openpilot is an open source driver assistance system. openpilot performs the functions of Automated Lane Centering and Adaptive Cruise Control for over 200 supported car makes and models.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

80 lines
2.6 KiB

#!/usr/bin/env python3
from cereal import car
from common.conversions import Conversions as CV
Ford Explorer 2020-21 (#25614) * add model years * update Focus steer ratio * Ford: add EU label to Focus Mk4 * add packages * add Ford Explorer 2020 Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf * Ford: steering control with path angle * Ford: add TJA toggle to buttons * add Ford Explorer 2021 `62241b0c7fea4589|2022-08-30--11-58-24--0` Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020) https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf * Ford: add shiftByWire ECU fw * angle/steer refactor * try always stop and go for US models * no dashcam * car info * send resume button * skip explorer * escape and focus back in dashcam * passthru buttons * fordcan set bus for button message * toggle off stock traffic jam assist so camera does not enforce driver presence checks * not used * update ramp rate/precision notes * cleanup * bump steering pressed torque to 0.8 Nm * add standstill * bump steer ratio * try increasing delay? * fix docs * add kuga car info * maybe fix tja toggle? * compensate for ford roll compensation?? * oops * better ui * block non-adaptive * add note on ui warning for hands on wheel * try only checking/toggling TJA every 2 seconds * add car test route * dashcam only again * send buttons to camera * add process replay segment * cleanup * bump panda * add extra FW Co-authored-by: Cameron Clough <cameronjclough@gmail.com> old-commit-hash: 9241de221099f6c65fd7ed5ed87d6296c17f668d
3 years ago
from selfdrive.car import STD_CARGO_KG, scale_rot_inertia, scale_tire_stiffness, gen_empty_fingerprint, get_safety_config
from selfdrive.car.ford.values import CAR, Ecu, TransmissionType, GearShifter
from selfdrive.car.interfaces import CarInterfaceBase
EventName = car.CarEvent.EventName
class CarInterface(CarInterfaceBase):
@staticmethod
def get_params(candidate, fingerprint=gen_empty_fingerprint(), car_fw=None, experimental_long=False):
Ford Explorer 2020-21 (#25614) * add model years * update Focus steer ratio * Ford: add EU label to Focus Mk4 * add packages * add Ford Explorer 2020 Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf * Ford: steering control with path angle * Ford: add TJA toggle to buttons * add Ford Explorer 2021 `62241b0c7fea4589|2022-08-30--11-58-24--0` Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020) https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf * Ford: add shiftByWire ECU fw * angle/steer refactor * try always stop and go for US models * no dashcam * car info * send resume button * skip explorer * escape and focus back in dashcam * passthru buttons * fordcan set bus for button message * toggle off stock traffic jam assist so camera does not enforce driver presence checks * not used * update ramp rate/precision notes * cleanup * bump steering pressed torque to 0.8 Nm * add standstill * bump steer ratio * try increasing delay? * fix docs * add kuga car info * maybe fix tja toggle? * compensate for ford roll compensation?? * oops * better ui * block non-adaptive * add note on ui warning for hands on wheel * try only checking/toggling TJA every 2 seconds * add car test route * dashcam only again * send buttons to camera * add process replay segment * cleanup * bump panda * add extra FW Co-authored-by: Cameron Clough <cameronjclough@gmail.com> old-commit-hash: 9241de221099f6c65fd7ed5ed87d6296c17f668d
3 years ago
if car_fw is None:
car_fw = []
ret = CarInterfaceBase.get_std_params(candidate, fingerprint)
ret.carName = "ford"
ret.dashcamOnly = True
Ford Explorer 2020-21 (#25614) * add model years * update Focus steer ratio * Ford: add EU label to Focus Mk4 * add packages * add Ford Explorer 2020 Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf * Ford: steering control with path angle * Ford: add TJA toggle to buttons * add Ford Explorer 2021 `62241b0c7fea4589|2022-08-30--11-58-24--0` Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020) https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf * Ford: add shiftByWire ECU fw * angle/steer refactor * try always stop and go for US models * no dashcam * car info * send resume button * skip explorer * escape and focus back in dashcam * passthru buttons * fordcan set bus for button message * toggle off stock traffic jam assist so camera does not enforce driver presence checks * not used * update ramp rate/precision notes * cleanup * bump steering pressed torque to 0.8 Nm * add standstill * bump steer ratio * try increasing delay? * fix docs * add kuga car info * maybe fix tja toggle? * compensate for ford roll compensation?? * oops * better ui * block non-adaptive * add note on ui warning for hands on wheel * try only checking/toggling TJA every 2 seconds * add car test route * dashcam only again * send buttons to camera * add process replay segment * cleanup * bump panda * add extra FW Co-authored-by: Cameron Clough <cameronjclough@gmail.com> old-commit-hash: 9241de221099f6c65fd7ed5ed87d6296c17f668d
3 years ago
ret.safetyConfigs = [get_safety_config(car.CarParams.SafetyModel.ford)]
# Angle-based steering
ret.steerControlType = car.CarParams.SteerControlType.angle
Ford Explorer 2020-21 (#25614) * add model years * update Focus steer ratio * Ford: add EU label to Focus Mk4 * add packages * add Ford Explorer 2020 Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf * Ford: steering control with path angle * Ford: add TJA toggle to buttons * add Ford Explorer 2021 `62241b0c7fea4589|2022-08-30--11-58-24--0` Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020) https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf * Ford: add shiftByWire ECU fw * angle/steer refactor * try always stop and go for US models * no dashcam * car info * send resume button * skip explorer * escape and focus back in dashcam * passthru buttons * fordcan set bus for button message * toggle off stock traffic jam assist so camera does not enforce driver presence checks * not used * update ramp rate/precision notes * cleanup * bump steering pressed torque to 0.8 Nm * add standstill * bump steer ratio * try increasing delay? * fix docs * add kuga car info * maybe fix tja toggle? * compensate for ford roll compensation?? * oops * better ui * block non-adaptive * add note on ui warning for hands on wheel * try only checking/toggling TJA every 2 seconds * add car test route * dashcam only again * send buttons to camera * add process replay segment * cleanup * bump panda * add extra FW Co-authored-by: Cameron Clough <cameronjclough@gmail.com> old-commit-hash: 9241de221099f6c65fd7ed5ed87d6296c17f668d
3 years ago
ret.steerActuatorDelay = 0.4
ret.steerLimitTimer = 1.0
Ford Explorer 2020-21 (#25614) * add model years * update Focus steer ratio * Ford: add EU label to Focus Mk4 * add packages * add Ford Explorer 2020 Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf * Ford: steering control with path angle * Ford: add TJA toggle to buttons * add Ford Explorer 2021 `62241b0c7fea4589|2022-08-30--11-58-24--0` Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020) https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf * Ford: add shiftByWire ECU fw * angle/steer refactor * try always stop and go for US models * no dashcam * car info * send resume button * skip explorer * escape and focus back in dashcam * passthru buttons * fordcan set bus for button message * toggle off stock traffic jam assist so camera does not enforce driver presence checks * not used * update ramp rate/precision notes * cleanup * bump steering pressed torque to 0.8 Nm * add standstill * bump steer ratio * try increasing delay? * fix docs * add kuga car info * maybe fix tja toggle? * compensate for ford roll compensation?? * oops * better ui * block non-adaptive * add note on ui warning for hands on wheel * try only checking/toggling TJA every 2 seconds * add car test route * dashcam only again * send buttons to camera * add process replay segment * cleanup * bump panda * add extra FW Co-authored-by: Cameron Clough <cameronjclough@gmail.com> old-commit-hash: 9241de221099f6c65fd7ed5ed87d6296c17f668d
3 years ago
tire_stiffness_factor = 1.0
if candidate == CAR.ESCAPE_MK4:
ret.wheelbase = 2.71
ret.steerRatio = 14.3 # Copied from Focus
ret.mass = 1750 + STD_CARGO_KG
Ford Explorer 2020-21 (#25614) * add model years * update Focus steer ratio * Ford: add EU label to Focus Mk4 * add packages * add Ford Explorer 2020 Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf * Ford: steering control with path angle * Ford: add TJA toggle to buttons * add Ford Explorer 2021 `62241b0c7fea4589|2022-08-30--11-58-24--0` Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020) https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf * Ford: add shiftByWire ECU fw * angle/steer refactor * try always stop and go for US models * no dashcam * car info * send resume button * skip explorer * escape and focus back in dashcam * passthru buttons * fordcan set bus for button message * toggle off stock traffic jam assist so camera does not enforce driver presence checks * not used * update ramp rate/precision notes * cleanup * bump steering pressed torque to 0.8 Nm * add standstill * bump steer ratio * try increasing delay? * fix docs * add kuga car info * maybe fix tja toggle? * compensate for ford roll compensation?? * oops * better ui * block non-adaptive * add note on ui warning for hands on wheel * try only checking/toggling TJA every 2 seconds * add car test route * dashcam only again * send buttons to camera * add process replay segment * cleanup * bump panda * add extra FW Co-authored-by: Cameron Clough <cameronjclough@gmail.com> old-commit-hash: 9241de221099f6c65fd7ed5ed87d6296c17f668d
3 years ago
elif candidate == CAR.EXPLORER_MK6:
ret.wheelbase = 3.025
ret.steerRatio = 16.8 # learned
ret.mass = 2050 + STD_CARGO_KG
elif candidate == CAR.FOCUS_MK4:
ret.wheelbase = 2.7
Ford Explorer 2020-21 (#25614) * add model years * update Focus steer ratio * Ford: add EU label to Focus Mk4 * add packages * add Ford Explorer 2020 Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf * Ford: steering control with path angle * Ford: add TJA toggle to buttons * add Ford Explorer 2021 `62241b0c7fea4589|2022-08-30--11-58-24--0` Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020) https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf * Ford: add shiftByWire ECU fw * angle/steer refactor * try always stop and go for US models * no dashcam * car info * send resume button * skip explorer * escape and focus back in dashcam * passthru buttons * fordcan set bus for button message * toggle off stock traffic jam assist so camera does not enforce driver presence checks * not used * update ramp rate/precision notes * cleanup * bump steering pressed torque to 0.8 Nm * add standstill * bump steer ratio * try increasing delay? * fix docs * add kuga car info * maybe fix tja toggle? * compensate for ford roll compensation?? * oops * better ui * block non-adaptive * add note on ui warning for hands on wheel * try only checking/toggling TJA every 2 seconds * add car test route * dashcam only again * send buttons to camera * add process replay segment * cleanup * bump panda * add extra FW Co-authored-by: Cameron Clough <cameronjclough@gmail.com> old-commit-hash: 9241de221099f6c65fd7ed5ed87d6296c17f668d
3 years ago
ret.steerRatio = 13.8 # learned
ret.mass = 1350 + STD_CARGO_KG
else:
raise ValueError(f"Unsupported car: ${candidate}")
Ford Explorer 2020-21 (#25614) * add model years * update Focus steer ratio * Ford: add EU label to Focus Mk4 * add packages * add Ford Explorer 2020 Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf * Ford: steering control with path angle * Ford: add TJA toggle to buttons * add Ford Explorer 2021 `62241b0c7fea4589|2022-08-30--11-58-24--0` Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020) https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf * Ford: add shiftByWire ECU fw * angle/steer refactor * try always stop and go for US models * no dashcam * car info * send resume button * skip explorer * escape and focus back in dashcam * passthru buttons * fordcan set bus for button message * toggle off stock traffic jam assist so camera does not enforce driver presence checks * not used * update ramp rate/precision notes * cleanup * bump steering pressed torque to 0.8 Nm * add standstill * bump steer ratio * try increasing delay? * fix docs * add kuga car info * maybe fix tja toggle? * compensate for ford roll compensation?? * oops * better ui * block non-adaptive * add note on ui warning for hands on wheel * try only checking/toggling TJA every 2 seconds * add car test route * dashcam only again * send buttons to camera * add process replay segment * cleanup * bump panda * add extra FW Co-authored-by: Cameron Clough <cameronjclough@gmail.com> old-commit-hash: 9241de221099f6c65fd7ed5ed87d6296c17f668d
3 years ago
# Auto Transmission: 0x732 ECU or Gear_Shift_by_Wire_FD1
found_ecus = [fw.ecu for fw in car_fw]
if Ecu.shiftByWire in found_ecus or 0x5A in fingerprint[0]:
ret.transmissionType = TransmissionType.automatic
else:
ret.transmissionType = TransmissionType.manual
Ford Explorer 2020-21 (#25614) * add model years * update Focus steer ratio * Ford: add EU label to Focus Mk4 * add packages * add Ford Explorer 2020 Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf * Ford: steering control with path angle * Ford: add TJA toggle to buttons * add Ford Explorer 2021 `62241b0c7fea4589|2022-08-30--11-58-24--0` Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020) https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf * Ford: add shiftByWire ECU fw * angle/steer refactor * try always stop and go for US models * no dashcam * car info * send resume button * skip explorer * escape and focus back in dashcam * passthru buttons * fordcan set bus for button message * toggle off stock traffic jam assist so camera does not enforce driver presence checks * not used * update ramp rate/precision notes * cleanup * bump steering pressed torque to 0.8 Nm * add standstill * bump steer ratio * try increasing delay? * fix docs * add kuga car info * maybe fix tja toggle? * compensate for ford roll compensation?? * oops * better ui * block non-adaptive * add note on ui warning for hands on wheel * try only checking/toggling TJA every 2 seconds * add car test route * dashcam only again * send buttons to camera * add process replay segment * cleanup * bump panda * add extra FW Co-authored-by: Cameron Clough <cameronjclough@gmail.com> old-commit-hash: 9241de221099f6c65fd7ed5ed87d6296c17f668d
3 years ago
ret.minEnableSpeed = 20.0 * CV.MPH_TO_MS
# BSM: Side_Detect_L_Stat, Side_Detect_R_Stat
# TODO: detect bsm in car_fw?
ret.enableBsm = 0x3A6 in fingerprint[0] and 0x3A7 in fingerprint[0]
# LCA can steer down to zero
ret.minSteerSpeed = 0.
Ford Explorer 2020-21 (#25614) * add model years * update Focus steer ratio * Ford: add EU label to Focus Mk4 * add packages * add Ford Explorer 2020 Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf * Ford: steering control with path angle * Ford: add TJA toggle to buttons * add Ford Explorer 2021 `62241b0c7fea4589|2022-08-30--11-58-24--0` Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020) https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf * Ford: add shiftByWire ECU fw * angle/steer refactor * try always stop and go for US models * no dashcam * car info * send resume button * skip explorer * escape and focus back in dashcam * passthru buttons * fordcan set bus for button message * toggle off stock traffic jam assist so camera does not enforce driver presence checks * not used * update ramp rate/precision notes * cleanup * bump steering pressed torque to 0.8 Nm * add standstill * bump steer ratio * try increasing delay? * fix docs * add kuga car info * maybe fix tja toggle? * compensate for ford roll compensation?? * oops * better ui * block non-adaptive * add note on ui warning for hands on wheel * try only checking/toggling TJA every 2 seconds * add car test route * dashcam only again * send buttons to camera * add process replay segment * cleanup * bump panda * add extra FW Co-authored-by: Cameron Clough <cameronjclough@gmail.com> old-commit-hash: 9241de221099f6c65fd7ed5ed87d6296c17f668d
3 years ago
ret.autoResumeSng = ret.minEnableSpeed == -1.
ret.rotationalInertia = scale_rot_inertia(ret.mass, ret.wheelbase)
Ford Explorer 2020-21 (#25614) * add model years * update Focus steer ratio * Ford: add EU label to Focus Mk4 * add packages * add Ford Explorer 2020 Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf * Ford: steering control with path angle * Ford: add TJA toggle to buttons * add Ford Explorer 2021 `62241b0c7fea4589|2022-08-30--11-58-24--0` Package: Co-Pilot 360 Assist+ Optional on XLT Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020) https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf * Ford: add shiftByWire ECU fw * angle/steer refactor * try always stop and go for US models * no dashcam * car info * send resume button * skip explorer * escape and focus back in dashcam * passthru buttons * fordcan set bus for button message * toggle off stock traffic jam assist so camera does not enforce driver presence checks * not used * update ramp rate/precision notes * cleanup * bump steering pressed torque to 0.8 Nm * add standstill * bump steer ratio * try increasing delay? * fix docs * add kuga car info * maybe fix tja toggle? * compensate for ford roll compensation?? * oops * better ui * block non-adaptive * add note on ui warning for hands on wheel * try only checking/toggling TJA every 2 seconds * add car test route * dashcam only again * send buttons to camera * add process replay segment * cleanup * bump panda * add extra FW Co-authored-by: Cameron Clough <cameronjclough@gmail.com> old-commit-hash: 9241de221099f6c65fd7ed5ed87d6296c17f668d
3 years ago
ret.centerToFront = ret.wheelbase * 0.44
ret.tireStiffnessFront, ret.tireStiffnessRear = scale_tire_stiffness(ret.mass, ret.wheelbase, ret.centerToFront,
tire_stiffness_factor=tire_stiffness_factor)
return ret
def _update(self, c):
ret = self.CS.update(self.cp, self.cp_cam)
events = self.create_common_events(ret, extra_gears=[GearShifter.manumatic])
ret.events = events.to_msg()
return ret
def apply(self, c):
return self.CC.update(c, self.CS)