/**
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* @ file stm32f2xx . h
* @ author MCD Application Team
* @ version V2 .1 .2
* @ date 29 - June - 2016
* @ brief CMSIS STM32F2xx Device Peripheral Access Layer Header File .
*
* The file is the unique include file that the application programmer
* is using in the C source code , usually in main . c . This file contains :
* - Configuration section that allows to select :
* - The STM32F2xx device used in the target application
* - To use or not the peripheral <EFBFBD> s drivers in application code ( i . e .
* code will be based on direct access to peripheral <EFBFBD> s registers
* rather than drivers API ) , this option is controlled by
* " #define USE_HAL_DRIVER "
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* @ attention
*
* < h2 > < center > & copy ; COPYRIGHT ( c ) 2016 STMicroelectronics < / center > < / h2 >
*
* Redistribution and use in source and binary forms , with or without modification ,
* are permitted provided that the following conditions are met :
* 1. Redistributions of source code must retain the above copyright notice ,
* this list of conditions and the following disclaimer .
* 2. Redistributions in binary form must reproduce the above copyright notice ,
* this list of conditions and the following disclaimer in the documentation
* and / or other materials provided with the distribution .
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission .
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS " AS IS "
* AND ANY EXPRESS OR IMPLIED WARRANTIES , INCLUDING , BUT NOT LIMITED TO , THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED . IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT , INDIRECT , INCIDENTAL , SPECIAL , EXEMPLARY , OR CONSEQUENTIAL
* DAMAGES ( INCLUDING , BUT NOT LIMITED TO , PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES ; LOSS OF USE , DATA , OR PROFITS ; OR BUSINESS INTERRUPTION ) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY , WHETHER IN CONTRACT , STRICT LIABILITY ,
* OR TORT ( INCLUDING NEGLIGENCE OR OTHERWISE ) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE , EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE .
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
/** @addtogroup CMSIS
* @ {
*/
/** @addtogroup stm32f2xx
* @ {
*/
# ifndef __STM32F2xx_H
# define __STM32F2xx_H
# ifdef __cplusplus
extern " C " {
# endif /* __cplusplus */
/** @addtogroup Library_configuration_section
* @ {
*/
/**
* @ brief STM32 Family
*/
# if !defined (STM32F2)
# define STM32F2
# endif /* STM32F2 */
/* Uncomment the line below according to the target STM32 device used in your
application
*/
# if !defined (STM32F205xx) && !defined (STM32F215xx) && !defined (STM32F207xx) && !defined (STM32F217xx)
/* #define STM32F205xx */ /*!< STM32F205RG, STM32F205VG, STM32F205ZG, STM32F205RF, STM32F205VF, STM32F205ZF,
STM32F205RE , STM32F205VE , STM32F205ZE , STM32F205RC , STM32F205VC , STM32F205ZC ,
STM32F205RB and STM32F205VB Devices */
/* #define STM32F215xx */ /*!< STM32F215RG, STM32F215VG, STM32F215ZG, STM32F215RE, STM32F215VE and STM32F215ZE Devices */
/* #define STM32F207xx */ /*!< STM32F207VG, STM32F207ZG, STM32F207IG, STM32F207VF, STM32F207ZF, STM32F207IF,
STM32F207VE , STM32F207ZE , STM32F207IE , STM32F207VC , STM32F207ZC and STM32F207IC Devices */
/* #define STM32F217xx */ /*!< STM32F217VG, STM32F217ZG, STM32F217IG, STM32F217VE, STM32F217ZE and STM32F217IE Devices */
# endif
/* Tip: To avoid modifying this file each time you need to switch between these
devices , you can define the device in your toolchain compiler preprocessor .
*/
# if !defined (USE_HAL_DRIVER)
/**
* @ brief Comment the line below if you will not use the peripherals drivers .
In this case , these drivers will not be included and the application code will
be based on direct access to peripherals registers
*/
/*#define USE_HAL_DRIVER */
# endif /* USE_HAL_DRIVER */
/**
* @ brief CMSIS Device version number V2 .1 .2
*/
# define __STM32F2xx_CMSIS_VERSION_MAIN (0x02U) /*!< [31:24] main version */
# define __STM32F2xx_CMSIS_VERSION_SUB1 (0x01U) /*!< [23:16] sub1 version */
# define __STM32F2xx_CMSIS_VERSION_SUB2 (0x02U) /*!< [15:8] sub2 version */
# define __STM32F2xx_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */
# define __STM32F2xx_CMSIS_VERSION ((__STM32F2xx_CMSIS_VERSION_MAIN << 24)\
| ( __STM32F2xx_CMSIS_VERSION_SUB1 < < 16 ) \
| ( __STM32F2xx_CMSIS_VERSION_SUB2 < < 8 ) \
| ( __STM32F2xx_CMSIS_VERSION ) )
/**
* @ }
*/
/** @addtogroup Device_Included
* @ {
*/
# if defined(STM32F205xx)
# include "stm32f205xx.h"
# elif defined(STM32F215xx)
# include "stm32f215xx.h"
# elif defined(STM32F207xx)
# include "stm32f207xx.h"
# elif defined(STM32F217xx)
# include "stm32f217xx.h"
# else
# error "Please select first the target STM32F2xx device used in your application (in stm32f2xx.h file)"
# endif
/**
* @ }
*/
/** @addtogroup Exported_types
* @ {
*/
typedef enum
{
RESET = 0 ,
SET = ! RESET
} FlagStatus , ITStatus ;
typedef enum
{
DISABLE = 0 ,
ENABLE = ! DISABLE
} FunctionalState ;
# define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
typedef enum
{
ERROR = 0 ,
SUCCESS = ! ERROR
} ErrorStatus ;
/**
* @ }
*/
/** @addtogroup Exported_macro
* @ {
*/
# define SET_BIT(REG, BIT) ((REG) |= (BIT))
# define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
# define READ_BIT(REG, BIT) ((REG) & (BIT))
# define CLEAR_REG(REG) ((REG) = (0x0))
# define WRITE_REG(REG, VAL) ((REG) = (VAL))
# define READ_REG(REG) ((REG))
# define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
# define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
/**
* @ }
*/
# if defined (USE_HAL_DRIVER)
# include "stm32f2xx_hal.h"
# endif /* USE_HAL_DRIVER */
# ifdef __cplusplus
}
# endif /* __cplusplus */
# endif /* __STM32F2xx_H */
/**
* @ }
*/
/**
* @ }
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
