openpilot is an open source driver assistance system. openpilot performs the functions of Automated Lane Centering and Adaptive Cruise Control for over 200 supported car makes and models.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

208 lines
9.5 KiB

from cereal import car
from openpilot.common.conversions import Conversions as CV
from openpilot.common.numpy_fast import clip
from openpilot.common.realtime import DT_CTRL
from opendbc.can.packer import CANPacker
from openpilot.selfdrive.car import apply_driver_steer_torque_limits, common_fault_avoidance
from openpilot.selfdrive.car.hyundai import hyundaicanfd, hyundaican
from openpilot.selfdrive.car.hyundai.hyundaicanfd import CanBus
from openpilot.selfdrive.car.hyundai.values import HyundaiFlags, Buttons, CarControllerParams, CANFD_CAR, CAR
VisualAlert = car.CarControl.HUDControl.VisualAlert
LongCtrlState = car.CarControl.Actuators.LongControlState
# EPS faults if you apply torque while the steering angle is above 90 degrees for more than 1 second
# All slightly below EPS thresholds to avoid fault
MAX_ANGLE = 85
MAX_ANGLE_FRAMES = 89
MAX_ANGLE_CONSECUTIVE_FRAMES = 2
def process_hud_alert(enabled, fingerprint, hud_control):
sys_warning = (hud_control.visualAlert in (VisualAlert.steerRequired, VisualAlert.ldw))
# initialize to no line visible
# TODO: this is not accurate for all cars
sys_state = 1
if hud_control.leftLaneVisible and hud_control.rightLaneVisible or sys_warning: # HUD alert only display when LKAS status is active
sys_state = 3 if enabled or sys_warning else 4
elif hud_control.leftLaneVisible:
sys_state = 5
elif hud_control.rightLaneVisible:
sys_state = 6
# initialize to no warnings
left_lane_warning = 0
right_lane_warning = 0
if hud_control.leftLaneDepart:
left_lane_warning = 1 if fingerprint in (CAR.GENESIS_G90, CAR.GENESIS_G80) else 2
if hud_control.rightLaneDepart:
right_lane_warning = 1 if fingerprint in (CAR.GENESIS_G90, CAR.GENESIS_G80) else 2
return sys_warning, sys_state, left_lane_warning, right_lane_warning
class CarController:
def __init__(self, dbc_name, CP, VM):
self.CP = CP
self.CAN = CanBus(CP)
self.params = CarControllerParams(CP)
self.packer = CANPacker(dbc_name)
self.angle_limit_counter = 0
self.frame = 0
self.accel_last = 0
self.apply_steer_last = 0
self.car_fingerprint = CP.carFingerprint
self.last_button_frame = 0
def update(self, CC, CS, now_nanos):
actuators = CC.actuators
hud_control = CC.hudControl
# steering torque
new_steer = int(round(actuators.steer * self.params.STEER_MAX))
apply_steer = apply_driver_steer_torque_limits(new_steer, self.apply_steer_last, CS.out.steeringTorque, self.params)
# >90 degree steering fault prevention
self.angle_limit_counter, apply_steer_req = common_fault_avoidance(abs(CS.out.steeringAngleDeg) >= MAX_ANGLE, CC.latActive,
self.angle_limit_counter, MAX_ANGLE_FRAMES,
MAX_ANGLE_CONSECUTIVE_FRAMES)
if not CC.latActive:
apply_steer = 0
# Hold torque with induced temporary fault when cutting the actuation bit
torque_fault = CC.latActive and not apply_steer_req
self.apply_steer_last = apply_steer
# accel + longitudinal
accel = clip(actuators.accel, CarControllerParams.ACCEL_MIN, CarControllerParams.ACCEL_MAX)
stopping = actuators.longControlState == LongCtrlState.stopping
set_speed_in_units = hud_control.setSpeed * (CV.MS_TO_KPH if CS.is_metric else CV.MS_TO_MPH)
# HUD messages
sys_warning, sys_state, left_lane_warning, right_lane_warning = process_hud_alert(CC.enabled, self.car_fingerprint,
hud_control)
can_sends = []
# *** common hyundai stuff ***
# tester present - w/ no response (keeps relevant ECU disabled)
if self.frame % 100 == 0 and not (self.CP.flags & HyundaiFlags.CANFD_CAMERA_SCC.value) and self.CP.openpilotLongitudinalControl:
# for longitudinal control, either radar or ADAS driving ECU
addr, bus = 0x7d0, 0
if self.CP.flags & HyundaiFlags.CANFD_HDA2.value:
addr, bus = 0x730, self.CAN.ECAN
can_sends.append([addr, 0, b"\x02\x3E\x80\x00\x00\x00\x00\x00", bus])
# for blinkers
if self.CP.flags & HyundaiFlags.ENABLE_BLINKERS:
can_sends.append([0x7b1, 0, b"\x02\x3E\x80\x00\x00\x00\x00\x00", self.CAN.ECAN])
# CAN-FD platforms
if self.CP.carFingerprint in CANFD_CAR:
hda2 = self.CP.flags & HyundaiFlags.CANFD_HDA2
hda2_long = hda2 and self.CP.openpilotLongitudinalControl
# steering control
can_sends.extend(hyundaicanfd.create_steering_messages(self.packer, self.CP, self.CAN, CC.enabled, apply_steer_req, apply_steer))
# prevent LFA from activating on HDA2 by sending "no lane lines detected" to ADAS ECU
if self.frame % 5 == 0 and hda2:
can_sends.append(hyundaicanfd.create_suppress_lfa(self.packer, self.CAN, CS.hda2_lfa_block_msg,
self.CP.flags & HyundaiFlags.CANFD_HDA2_ALT_STEERING))
Hyundai: Car Port for Tucson Hybrid 2022 (#25276) * Hyundai: Car Port for Tucson Hybrid 2022 * Update RELEASES.md * Init gear_msg at the top * FW versions from script * Button send attempt * start with some cleanup * Send button fixed bits * Define all bytes and only send PAUSE/RESUME * Use CRUISE_INFO to cancel cruise and resume * 8-bit counter * Cleanup ish * 8 bit counter * Send at 20ms * Disengage bits * Revert bump submodules * Allow tx on 0x1a0 * Fix byte counts * Send LFA and HDA icons based on engageability * Send cruise buttons only on HDA2 cars for now * Add comments * Add FLAG_HYUNDAI_CANFD_HDA2 flag * Update interface.py * Update carstate.py * Update carstate.py * Update carstate.py * Bump submodules * Bump panda * Bump opendbc * Allow tx with CRUISE_INACTIVE * GEAR has 24 bytes only * Generate car docs * Fix CRUISE_INFO copy * Remove unused class * Add CAN-FD busses to unit test * Bump opendbc * Revert "Add CAN-FD busses to unit test" This reverts commit 2f751640408a7f73a9100947cbd95ea13fbb8a48. * Remove duplicate * New tune based on data * Panda safety cleanup * Include bus 0 in rx checks * Missed one * bus 6 check * Remove redundant check * Add comments * Bump opendbc * Sync with DBC * Hide LFA icon when disengaged * Little endian * fix comment * more conditions in carcontroller * update pedal signal * update tuning * cleanup carcontroller * bump panda * fix mismatch * alt buttons * little more cleanup * update refs for EV6 new safety param * bump panda Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com> old-commit-hash: bd5e28909f4576699717f8a2f6751f0d9fdfecc0
3 years ago
# LFA and HDA icons
if self.frame % 5 == 0 and (not hda2 or hda2_long):
can_sends.append(hyundaicanfd.create_lfahda_cluster(self.packer, self.CAN, CC.enabled))
Hyundai: Car Port for Tucson Hybrid 2022 (#25276) * Hyundai: Car Port for Tucson Hybrid 2022 * Update RELEASES.md * Init gear_msg at the top * FW versions from script * Button send attempt * start with some cleanup * Send button fixed bits * Define all bytes and only send PAUSE/RESUME * Use CRUISE_INFO to cancel cruise and resume * 8-bit counter * Cleanup ish * 8 bit counter * Send at 20ms * Disengage bits * Revert bump submodules * Allow tx on 0x1a0 * Fix byte counts * Send LFA and HDA icons based on engageability * Send cruise buttons only on HDA2 cars for now * Add comments * Add FLAG_HYUNDAI_CANFD_HDA2 flag * Update interface.py * Update carstate.py * Update carstate.py * Update carstate.py * Bump submodules * Bump panda * Bump opendbc * Allow tx with CRUISE_INACTIVE * GEAR has 24 bytes only * Generate car docs * Fix CRUISE_INFO copy * Remove unused class * Add CAN-FD busses to unit test * Bump opendbc * Revert "Add CAN-FD busses to unit test" This reverts commit 2f751640408a7f73a9100947cbd95ea13fbb8a48. * Remove duplicate * New tune based on data * Panda safety cleanup * Include bus 0 in rx checks * Missed one * bus 6 check * Remove redundant check * Add comments * Bump opendbc * Sync with DBC * Hide LFA icon when disengaged * Little endian * fix comment * more conditions in carcontroller * update pedal signal * update tuning * cleanup carcontroller * bump panda * fix mismatch * alt buttons * little more cleanup * update refs for EV6 new safety param * bump panda Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com> old-commit-hash: bd5e28909f4576699717f8a2f6751f0d9fdfecc0
3 years ago
# blinkers
if hda2 and self.CP.flags & HyundaiFlags.ENABLE_BLINKERS:
can_sends.extend(hyundaicanfd.create_spas_messages(self.packer, self.CAN, self.frame, CC.leftBlinker, CC.rightBlinker))
if self.CP.openpilotLongitudinalControl:
if hda2:
can_sends.extend(hyundaicanfd.create_adrv_messages(self.packer, self.CAN, self.frame))
if self.frame % 2 == 0:
can_sends.append(hyundaicanfd.create_acc_control(self.packer, self.CAN, CC.enabled, self.accel_last, accel, stopping, CC.cruiseControl.override,
set_speed_in_units))
self.accel_last = accel
else:
# button presses
can_sends.extend(self.create_button_messages(CC, CS, use_clu11=False))
else:
can_sends.append(hyundaican.create_lkas11(self.packer, self.frame, self.car_fingerprint, apply_steer, apply_steer_req,
torque_fault, CS.lkas11, sys_warning, sys_state, CC.enabled,
hud_control.leftLaneVisible, hud_control.rightLaneVisible,
left_lane_warning, right_lane_warning))
if not self.CP.openpilotLongitudinalControl:
can_sends.extend(self.create_button_messages(CC, CS, use_clu11=True))
if self.frame % 2 == 0 and self.CP.openpilotLongitudinalControl:
# TODO: unclear if this is needed
jerk = 3.0 if actuators.longControlState == LongCtrlState.pid else 1.0
use_fca = self.CP.flags & HyundaiFlags.USE_FCA.value
can_sends.extend(hyundaican.create_acc_commands(self.packer, CC.enabled, accel, jerk, int(self.frame / 2),
hud_control.leadVisible, set_speed_in_units, stopping,
CC.cruiseControl.override, use_fca))
# 20 Hz LFA MFA message
if self.frame % 5 == 0 and self.CP.flags & HyundaiFlags.SEND_LFA.value:
can_sends.append(hyundaican.create_lfahda_mfc(self.packer, CC.enabled))
# 5 Hz ACC options
if self.frame % 20 == 0 and self.CP.openpilotLongitudinalControl:
can_sends.extend(hyundaican.create_acc_opt(self.packer))
# 2 Hz front radar options
if self.frame % 50 == 0 and self.CP.openpilotLongitudinalControl:
can_sends.append(hyundaican.create_frt_radar_opt(self.packer))
new_actuators = actuators.copy()
new_actuators.steer = apply_steer / self.params.STEER_MAX
new_actuators.steerOutputCan = apply_steer
new_actuators.accel = accel
self.frame += 1
return new_actuators, can_sends
def create_button_messages(self, CC: car.CarControl, CS: car.CarState, use_clu11: bool):
can_sends = []
if use_clu11:
if CC.cruiseControl.cancel:
can_sends.append(hyundaican.create_clu11(self.packer, self.frame, CS.clu11, Buttons.CANCEL, self.CP.carFingerprint))
elif CC.cruiseControl.resume:
# send resume at a max freq of 10Hz
if (self.frame - self.last_button_frame) * DT_CTRL > 0.1:
# send 25 messages at a time to increases the likelihood of resume being accepted
can_sends.extend([hyundaican.create_clu11(self.packer, self.frame, CS.clu11, Buttons.RES_ACCEL, self.CP.carFingerprint)] * 25)
if (self.frame - self.last_button_frame) * DT_CTRL >= 0.15:
self.last_button_frame = self.frame
else:
if (self.frame - self.last_button_frame) * DT_CTRL > 0.25:
# cruise cancel
if CC.cruiseControl.cancel:
if self.CP.flags & HyundaiFlags.CANFD_ALT_BUTTONS:
can_sends.append(hyundaicanfd.create_acc_cancel(self.packer, self.CP, self.CAN, CS.cruise_info))
self.last_button_frame = self.frame
else:
for _ in range(20):
can_sends.append(hyundaicanfd.create_buttons(self.packer, self.CP, self.CAN, CS.buttons_counter+1, Buttons.CANCEL))
self.last_button_frame = self.frame
# cruise standstill resume
elif CC.cruiseControl.resume:
if self.CP.flags & HyundaiFlags.CANFD_ALT_BUTTONS:
# TODO: resume for alt button cars
pass
else:
for _ in range(20):
can_sends.append(hyundaicanfd.create_buttons(self.packer, self.CP, self.CAN, CS.buttons_counter+1, Buttons.RES_ACCEL))
self.last_button_frame = self.frame
return can_sends