openpilot_comma/python/uds.py

#!/usr/bin/env python3
import time
import struct
from typing import Callable, NamedTuple, Tuple, List
from enum import IntEnum

class SERVICE_TYPE(IntEnum):
  DIAGNOSTIC_SESSION_CONTROL         = 0x10
  ECU_RESET                          = 0x11
  SECURITY_ACCESS                    = 0x27
  COMMUNICATION_CONTROL              = 0x28
  TESTER_PRESENT                     = 0x3E
  ACCESS_TIMING_PARAMETER            = 0x83
  SECURED_DATA_TRANSMISSION          = 0x84
  CONTROL_DTC_SETTING                = 0x85
  RESPONSE_ON_EVENT                  = 0x86
  LINK_CONTROL                       = 0x87
  READ_DATA_BY_IDENTIFIER            = 0x22
  READ_MEMORY_BY_ADDRESS             = 0x23
  READ_SCALING_DATA_BY_IDENTIFIER    = 0x24
  READ_DATA_BY_PERIODIC_IDENTIFIER   = 0x2A
  DYNAMICALLY_DEFINE_DATA_IDENTIFIER = 0x2C
  WRITE_DATA_BY_IDENTIFIER           = 0x2E
  WRITE_MEMORY_BY_ADDRESS            = 0x3D
  CLEAR_DIAGNOSTIC_INFORMATION       = 0x14
  READ_DTC_INFORMATION               = 0x19
  INPUT_OUTPUT_CONTROL_BY_IDENTIFIER = 0x2F
  ROUTINE_CONTROL                    = 0x31
  REQUEST_DOWNLOAD                   = 0x34
  REQUEST_UPLOAD                     = 0x35
  TRANSFER_DATA                      = 0x36
  REQUEST_TRANSFER_EXIT              = 0x37

class SESSION_TYPE(IntEnum):
  DEFAULT = 1
  PROGRAMMING = 2
  EXTENDED_DIAGNOSTIC = 3
  SAFETY_SYSTEM_DIAGNOSTIC = 4

class RESET_TYPE(IntEnum):
  HARD = 1
  KEY_OFF_ON = 2
  SOFT = 3
  ENABLE_RAPID_POWER_SHUTDOWN = 4
  DISABLE_RAPID_POWER_SHUTDOWN = 5

class ACCESS_TYPE(IntEnum):
  REQUEST_SEED = 1
  SEND_KEY = 2

class CONTROL_TYPE(IntEnum):
  ENABLE_RX_ENABLE_TX = 0
  ENABLE_RX_DISABLE_TX = 1
  DISABLE_RX_ENABLE_TX = 2
  DISABLE_RX_DISABLE_TX = 3

class MESSAGE_TYPE(IntEnum):
  NORMAL = 1
  NETWORK_MANAGEMENT = 2
  NORMAL_AND_NETWORK_MANAGEMENT = 3

class TIMING_PARAMETER_TYPE(IntEnum):
  READ_EXTENDED_SET = 1
  SET_TO_DEFAULT_VALUES = 2
  READ_CURRENTLY_ACTIVE = 3
  SET_TO_GIVEN_VALUES = 4

class DTC_SETTING_TYPE(IntEnum):
  ON = 1
  OFF = 2

class RESPONSE_EVENT_TYPE(IntEnum):
  STOP_RESPONSE_ON_EVENT = 0
  ON_DTC_STATUS_CHANGE = 1
  ON_TIMER_INTERRUPT = 2
  ON_CHANGE_OF_DATA_IDENTIFIER = 3
  REPORT_ACTIVATED_EVENTS = 4
  START_RESPONSE_ON_EVENT = 5
  CLEAR_RESPONSE_ON_EVENT = 6
  ON_COMPARISON_OF_VALUES = 7

class LINK_CONTROL_TYPE(IntEnum):
  VERIFY_BAUDRATE_TRANSITION_WITH_FIXED_BAUDRATE = 1
  VERIFY_BAUDRATE_TRANSITION_WITH_SPECIFIC_BAUDRATE = 2
  TRANSITION_BAUDRATE = 3

class BAUD_RATE_TYPE(IntEnum):
  PC9600 = 1
  PC19200 = 2
  PC38400 = 3
  PC57600 = 4
  PC115200 = 5
  CAN125000 = 16
  CAN250000 = 17
  CAN500000 = 18
  CAN1000000 = 19

class DATA_IDENTIFIER_TYPE(IntEnum):
  BOOT_SOFTWARE_IDENTIFICATION = 0xF180
  APPLICATION_SOFTWARE_IDENTIFICATION = 0xF181
  APPLICATION_DATA_IDENTIFICATION = 0xF182
  BOOT_SOFTWARE_FINGERPRINT = 0xF183
  APPLICATION_SOFTWARE_FINGERPRINT = 0xF184
  APPLICATION_DATA_FINGERPRINT = 0xF185
  ACTIVE_DIAGNOSTIC_SESSION = 0xF186
  VEHICLE_MANUFACTURER_SPARE_PART_NUMBER = 0xF187
  VEHICLE_MANUFACTURER_ECU_SOFTWARE_NUMBER = 0xF188
  VEHICLE_MANUFACTURER_ECU_SOFTWARE_VERSION_NUMBER = 0xF189
  SYSTEM_SUPPLIER_IDENTIFIER = 0xF18A
  ECU_MANUFACTURING_DATE = 0xF18B
  ECU_SERIAL_NUMBER = 0xF18C
  SUPPORTED_FUNCTIONAL_UNITS = 0xF18D
  VEHICLE_MANUFACTURER_KIT_ASSEMBLY_PART_NUMBER = 0xF18E
  VIN = 0xF190
  VEHICLE_MANUFACTURER_ECU_HARDWARE_NUMBER = 0xF191
  SYSTEM_SUPPLIER_ECU_HARDWARE_NUMBER = 0xF192
  SYSTEM_SUPPLIER_ECU_HARDWARE_VERSION_NUMBER = 0xF193
  SYSTEM_SUPPLIER_ECU_SOFTWARE_NUMBER = 0xF194
  SYSTEM_SUPPLIER_ECU_SOFTWARE_VERSION_NUMBER = 0xF195
  EXHAUST_REGULATION_OR_TYPE_APPROVAL_NUMBER = 0xF196
  SYSTEM_NAME_OR_ENGINE_TYPE = 0xF197
  REPAIR_SHOP_CODE_OR_TESTER_SERIAL_NUMBER = 0xF198
  PROGRAMMING_DATE = 0xF199
  CALIBRATION_REPAIR_SHOP_CODE_OR_CALIBRATION_EQUIPMENT_SERIAL_NUMBER = 0xF19A
  CALIBRATION_DATE = 0xF19B
  CALIBRATION_EQUIPMENT_SOFTWARE_NUMBER = 0xF19C
  ECU_INSTALLATION_DATE = 0xF19D
  ODX_FILE = 0xF19E
  ENTITY = 0xF19F

class TRANSMISSION_MODE_TYPE(IntEnum):
  SEND_AT_SLOW_RATE = 1
  SEND_AT_MEDIUM_RATE = 2
  SEND_AT_FAST_RATE = 3
  STOP_SENDING = 4

class DYNAMIC_DEFINITION_TYPE(IntEnum):
  DEFINE_BY_IDENTIFIER = 1
  DEFINE_BY_MEMORY_ADDRESS = 2
  CLEAR_DYNAMICALLY_DEFINED_DATA_IDENTIFIER = 3

class DynamicSourceDefinition(NamedTuple):
  data_identifier: int
  position: int
  memory_size: int
  memory_address: int

class DTC_GROUP_TYPE(IntEnum):
  EMISSIONS = 0x000000
  ALL = 0xFFFFFF

class DTC_REPORT_TYPE(IntEnum):
  NUMBER_OF_DTC_BY_STATUS_MASK = 0x01
  DTC_BY_STATUS_MASK = 0x02
  DTC_SNAPSHOT_IDENTIFICATION = 0x03
  DTC_SNAPSHOT_RECORD_BY_DTC_NUMBER = 0x04
  DTC_SNAPSHOT_RECORD_BY_RECORD_NUMBER = 0x05
  DTC_EXTENDED_DATA_RECORD_BY_DTC_NUMBER = 0x06
  NUMBER_OF_DTC_BY_SEVERITY_MASK_RECORD = 0x07
  DTC_BY_SEVERITY_MASK_RECORD = 0x08
  SEVERITY_INFORMATION_OF_DTC = 0x09
  SUPPORTED_DTC = 0x0A
  FIRST_TEST_FAILED_DTC = 0x0B
  FIRST_CONFIRMED_DTC = 0x0C
  MOST_RECENT_TEST_FAILED_DTC = 0x0D
  MOST_RECENT_CONFIRMED_DTC = 0x0E
  MIRROR_MEMORY_DTC_BY_STATUS_MASK = 0x0F
  MIRROR_MEMORY_DTC_EXTENDED_DATA_RECORD_BY_DTC_NUMBER = 0x10
  NUMBER_OF_MIRROR_MEMORY_DTC_BY_STATUS_MASK = 0x11
  NUMBER_OF_EMISSIONS_RELATED_OBD_DTC_BY_STATUS_MASK = 0x12
  EMISSIONS_RELATED_OBD_DTC_BY_STATUS_MASK = 0x13
  DTC_FAULT_DETECTION_COUNTER = 0x14
  DTC_WITH_PERMANENT_STATUS = 0x15

class DTC_STATUS_MASK_TYPE(IntEnum):
  TEST_FAILED = 0x01
  TEST_FAILED_THIS_OPERATION_CYCLE = 0x02
  PENDING_DTC = 0x04
  CONFIRMED_DTC = 0x08
  TEST_NOT_COMPLETED_SINCE_LAST_CLEAR = 0x10
  TEST_FAILED_SINCE_LAST_CLEAR = 0x20
  TEST_NOT_COMPLETED_THIS_OPERATION_CYCLE = 0x40
  WARNING_INDICATOR_REQUESTED = 0x80
  ALL = 0xFF

class DTC_SEVERITY_MASK_TYPE(IntEnum):
  MAINTENANCE_ONLY = 0x20
  CHECK_AT_NEXT_HALT = 0x40
  CHECK_IMMEDIATELY = 0x80
  ALL = 0xE0

class CONTROL_PARAMETER_TYPE(IntEnum):
  RETURN_CONTROL_TO_ECU = 0
  RESET_TO_DEFAULT = 1
  FREEZE_CURRENT_STATE = 2
  SHORT_TERM_ADJUSTMENT = 3

class ROUTINE_CONTROL_TYPE(IntEnum):
  START = 1
  STOP = 2
  REQUEST_RESULTS = 3

class ROUTINE_IDENTIFIER_TYPE(IntEnum):
  ERASE_MEMORY = 0xFF00
  CHECK_PROGRAMMING_DEPENDENCIES = 0xFF01
  ERASE_MIRROR_MEMORY_DTCS = 0xFF02

class MessageTimeoutError(Exception):
  pass

class NegativeResponseError(Exception):
  def __init__(self, message, service_id, error_code):
    super().__init__()
    self.message = message
    self.service_id = service_id
    self.error_code = error_code

  def __str__(self):
    return self.message

class InvalidServiceIdError(Exception):
  pass

class InvalidSubFunctioneError(Exception):
  pass

_negative_response_codes = {
    0x00: 'positive response',
    0x10: 'general reject',
    0x11: 'service not supported',
    0x12: 'sub-function not supported',
    0x13: 'incorrect message length or invalid format',
    0x14: 'response too long',
    0x21: 'busy repeat request',
    0x22: 'conditions not correct',
    0x24: 'request sequence error',
    0x25: 'no response from subnet component',
    0x26: 'failure prevents execution of requested action',
    0x31: 'request out of range',
    0x33: 'security access denied',
    0x35: 'invalid key',
    0x36: 'exceed numebr of attempts',
    0x37: 'required time delay not expired',
    0x70: 'upload download not accepted',
    0x71: 'transfer data suspended',
    0x72: 'general programming failure',
    0x73: 'wrong block sequence counter',
    0x78: 'request correctly received - response pending',
    0x7e: 'sub-function not supported in active session',
    0x7f: 'service not supported in active session',
    0x81: 'rpm too high',
    0x82: 'rpm too low',
    0x83: 'engine is running',
    0x84: 'engine is not running',
    0x85: 'engine run time too low',
    0x86: 'temperature too high',
    0x87: 'temperature too low',
    0x88: 'vehicle speed too high',
    0x89: 'vehicle speed too low',
    0x8a: 'throttle/pedal too high',
    0x8b: 'throttle/pedal too low',
    0x8c: 'transmission not in neutral',
    0x8d: 'transmission not in gear',
    0x8f: 'brake switch(es) not closed',
    0x90: 'shifter lever not in park',
    0x91: 'torque converter clutch locked',
    0x92: 'voltage too high',
    0x93: 'voltage too low',
}

class CanClient():
  def __init__(self, can_send: Callable[[Tuple[int, bytes, int]], None], can_recv: Callable[[], List[Tuple[int, int, bytes, int]]], tx_addr: int, rx_addr: int, bus: int, debug: bool=False):
    self.tx = can_send
    self.rx = can_recv
    self.tx_addr = tx_addr
    self.rx_addr = rx_addr
    self.bus = bus
    self.debug = debug

  def _recv_filter(self, bus, addr):
    # handle functionl addresses (switch to first addr to respond)
    if self.tx_addr == 0x7DF:
      is_response = addr >= 0x7E8 and addr <= 0x7EF
      if is_response:
        if self.debug: print(f"switch to physical addr {hex(addr)}")
        self.tx_addr = addr-8
        self.rx_addr = addr
      return is_response
    if self.tx_addr == 0x18DB33F1:
      is_response = addr >= 0x18DAF100 and addr <= 0x18DAF1FF
      if is_response:
        if self.debug: print(f"switch to physical addr {hex(addr)}")
        self.tx_addr = 0x18DA00F1 + (addr<<8 & 0xFF00)
        self.rx_addr = addr
    return bus == self.bus and addr == self.rx_addr

  def recv(self, drain=False) -> List[bytes]:
    msg_array = []
    while True:
      msgs = self.rx()
      if drain:
        if self.debug: print("CAN-RX: drain - {}".format(len(msgs)))
      else:
        for rx_addr, rx_ts, rx_data, rx_bus in msgs or []:
          if self._recv_filter(rx_bus, rx_addr) and len(rx_data) > 0:
            rx_data = bytes(rx_data) # convert bytearray to bytes
            if self.debug: print(f"CAN-RX: {hex(rx_addr)} - 0x{bytes.hex(rx_data)}")
            msg_array.append(rx_data)
      # break when non-full buffer is processed
      if len(msgs) < 254:
        return msg_array

  def send(self, msgs: List[bytes], delay: float=0) -> None:
    first = True
    for msg in msgs:
      if delay and not first:
        if self.debug: print(f"CAN-TX: delay - {delay}")
        time.sleep(delay)
      if self.debug: print(f"CAN-TX: {hex(self.tx_addr)} - 0x{bytes.hex(msg)}")
      self.tx(self.tx_addr, msg, self.bus)
      first = False

class IsoTpMessage():
  def __init__(self, can_client: CanClient, timeout: float=1, debug: bool=False):
    self._can_client = can_client
    self.timeout = timeout
    self.debug = debug

  def send(self, dat: bytes) -> None:
    # throw away any stale data
    self._can_client.recv(drain=True)

    self.tx_dat = dat
    self.tx_len = len(dat)
    self.tx_idx = 0
    self.tx_done = False

    self.rx_dat = b""
    self.rx_len = 0
    self.rx_idx = 0
    self.rx_done = False

    if self.debug: print(f"ISO-TP: REQUEST - 0x{bytes.hex(self.tx_dat)}")
    self._tx_first_frame()

  def _tx_first_frame(self) -> None:
    if self.tx_len < 8:
      # single frame (send all bytes)
      if self.debug: print("ISO-TP: TX - single frame")
      msg = (bytes([self.tx_len]) + self.tx_dat).ljust(8, b"\x00")
      self.tx_done = True
    else:
      # first frame (send first 6 bytes)
      if self.debug: print("ISO-TP: TX - first frame")
      msg = (struct.pack("!H", 0x1000 | self.tx_len) + self.tx_dat[:6]).ljust(8, b"\x00")
    self._can_client.send([msg])

  def recv(self) -> bytes:
    start_time = time.time()
    try:
      while True:
        for msg in self._can_client.recv():
          self._isotp_rx_next(msg)
          if self.tx_done and self.rx_done:
            return self.rx_dat
        # no timeout indicates non-blocking
        if self.timeout == 0:
          return None
        if time.time() - start_time > self.timeout:
          raise MessageTimeoutError("timeout waiting for response")
    finally:
      if self.debug and self.rx_dat: print(f"ISO-TP: RESPONSE - 0x{bytes.hex(self.rx_dat)}")

  def _isotp_rx_next(self, rx_data: bytes) -> None:
    # single rx_frame
    if rx_data[0] >> 4 == 0x0:
      self.rx_len = rx_data[0] & 0xFF
      self.rx_dat = rx_data[1:1+self.rx_len]
      self.rx_idx = 0
      self.rx_done = True
      if self.debug: print(f"ISO-TP: RX - single frame - idx={self.rx_idx} done={self.rx_done}")
      return

    # first rx_frame
    if rx_data[0] >> 4 == 0x1:
      self.rx_len = ((rx_data[0] & 0x0F) << 8) + rx_data[1]
      self.rx_dat = rx_data[2:]
      self.rx_idx = 0
      self.rx_done = False
      if self.debug: print(f"ISO-TP: RX - first frame - idx={self.rx_idx} done={self.rx_done}")
      if self.debug: print(f"ISO-TP: TX - flow control continue")
      # send flow control message (send all bytes)
      msg = b"\x30\x00\x00".ljust(8, b"\x00")
      self._can_client.send([msg])
      return

    # consecutive rx frame
    if rx_data[0] >> 4 == 0x2:
      assert self.rx_done == False, "isotp - rx: consecutive frame with no active frame"
      self.rx_idx += 1
      assert self.rx_idx & 0xF == rx_data[0] & 0xF, "isotp - rx: invalid consecutive frame index"
      rx_size = self.rx_len - len(self.rx_dat)
      self.rx_dat += rx_data[1:1+min(rx_size, 7)]
      if self.rx_len == len(self.rx_dat):
        self.rx_done = True
      if self.debug: print(f"ISO-TP: RX - consecutive frame - idx={self.rx_idx} done={self.rx_done}")
      return

    # flow control
    if rx_data[0] >> 4 == 0x3:
      assert self.tx_done == False, "isotp - rx: flow control with no active frame"
      assert rx_data[0] != 0x32, "isotp - rx: flow-control overflow/abort"
      assert rx_data[0] == 0x30 or rx_data[0] == 0x31, "isotp - rx: flow-control transfer state indicator invalid"
      if rx_data[0] == 0x30:
        if self.debug: print("ISO-TP: RX - flow control continue")
        delay_ts = rx_data[2] & 0x7F
        # scale is 1 milliseconds if first bit == 0, 100 micro seconds if first bit == 1
        delay_div = 1000. if rx_data[2] & 0x80 == 0 else 10000.
        delay_sec = delay_ts / delay_div
        # first frame = 6 bytes, each consecutive frame = 7 bytes
        start = 6 + self.tx_idx * 7
        count = rx_data[1]
        end = start + count * 7 if count > 0 else self.tx_len
        tx_msgs = []
        for i in range(start, end, 7):
          self.tx_idx += 1
          # consecutive tx messages
          msg = (bytes([0x20 | (self.tx_idx & 0xF)]) + self.tx_dat[i:i+7]).ljust(8, b"\x00")
          tx_msgs.append(msg)
        # send consecutive tx messages
        self._can_client.send(tx_msgs, delay=delay_sec)
        if end >= self.tx_len:
          self.tx_done = True
        if self.debug: print(f"ISO-TP: TX - consecutive frame - idx={self.tx_idx} done={self.tx_done}")
      elif rx_data[0] == 0x31:
        # wait (do nothing until next flow control message)
        if self.debug: print("ISO-TP: TX - flow control wait")

FUNCTIONAL_ADDRS = [0x7DF, 0x18DB33F1]

def get_rx_addr_for_tx_addr(tx_addr):
  if tx_addr in FUNCTIONAL_ADDRS:
    return None

  if tx_addr < 0xFFF8:
    # standard 11 bit response addr (add 8)
    return tx_addr + 8
  
  if tx_addr > 0x10000000 and tx_addr < 0xFFFFFFFF:
    # standard 29 bit response addr (flip last two bytes)
    return (tx_addr & 0xFFFF0000) + (tx_addr<<8 & 0xFF00) + (tx_addr>>8 & 0xFF)

  raise ValueError("invalid tx_addr: {}".format(tx_addr))

class UdsClient():
  def __init__(self, panda, tx_addr: int, rx_addr: int=None, bus: int=0, timeout: float=1, debug: bool=False):
    self.bus = bus
    self.tx_addr = tx_addr
    self.rx_addr = rx_addr if rx_addr is not None else get_rx_addr_for_tx_addr(tx_addr)
    self.timeout = timeout
    self.debug = debug
    self._can_client = CanClient(panda.can_send, panda.can_recv, self.tx_addr, self.rx_addr, self.bus, debug=self.debug)

  # generic uds request
  def _uds_request(self, service_type: SERVICE_TYPE, subfunction: int=None, data: bytes=None) -> bytes:
    req = bytes([service_type])
    if subfunction is not None:
      req += bytes([subfunction])
    if data is not None:
      req += data

    # send request, wait for response
    isotp_msg = IsoTpMessage(self._can_client, self.timeout, self.debug)
    isotp_msg.send(req)
    while True:
      resp = isotp_msg.recv()
      resp_sid = resp[0] if len(resp) > 0 else None

      # negative response
      if resp_sid == 0x7F:
        service_id = resp[1] if len(resp) > 1 else -1
        try:
          service_desc = SERVICE_TYPE(service_id).name
        except BaseException:
          service_desc = 'NON_STANDARD_SERVICE'
        error_code = resp[2] if len(resp) > 2 else -1
        try:
          error_desc = _negative_response_codes[error_code]
        except BaseException:
          error_desc = resp[3:]
        # wait for another message if response pending
        if error_code == 0x78:
          if self.debug: print("UDS-RX: response pending")
          continue
        raise NegativeResponseError('{} - {}'.format(service_desc, error_desc), service_id, error_code)

      # positive response
      if service_type+0x40 != resp_sid:
        resp_sid_hex = hex(resp_sid) if resp_sid is not None else None
        raise InvalidServiceIdError('invalid response service id: {}'.format(resp_sid_hex))

      if subfunction is not None:
        resp_sfn = resp[1] if len(resp) > 1 else None
        if subfunction != resp_sfn:
          resp_sfn_hex = hex(resp_sfn) if resp_sfn is not None else None
          raise InvalidSubFunctioneError('invalid response subfunction: {}'.format(hex(resp_sfn_hex)))

      # return data (exclude service id and sub-function id)
      return resp[(1 if subfunction is None else 2):]

  # services
  def diagnostic_session_control(self, session_type: SESSION_TYPE):
    self._uds_request(SERVICE_TYPE.DIAGNOSTIC_SESSION_CONTROL, subfunction=session_type)

  def ecu_reset(self, reset_type: RESET_TYPE):
    resp = self._uds_request(SERVICE_TYPE.ECU_RESET, subfunction=reset_type)
    power_down_time = None
    if reset_type == RESET_TYPE.ENABLE_RAPID_POWER_SHUTDOWN:
      power_down_time = resp[0]
      return power_down_time

  def security_access(self, access_type: ACCESS_TYPE, security_key: bytes=None):
    request_seed = access_type % 2 != 0
    if request_seed and security_key is not None:
      raise ValueError('security_key not allowed')
    if not request_seed and security_key is None:
      raise ValueError('security_key is missing')
    resp = self._uds_request(SERVICE_TYPE.SECURITY_ACCESS, subfunction=access_type, data=security_key)
    if request_seed:
      security_seed = resp
      return security_seed

  def communication_control(self, control_type: CONTROL_TYPE, message_type: MESSAGE_TYPE):
    data = bytes([message_type])
    self._uds_request(SERVICE_TYPE.COMMUNICATION_CONTROL, subfunction=control_type, data=data)

  def tester_present(self, ):
    self._uds_request(SERVICE_TYPE.TESTER_PRESENT, subfunction=0x00)

  def access_timing_parameter(self, timing_parameter_type: TIMING_PARAMETER_TYPE, parameter_values: bytes=None):
    write_custom_values = timing_parameter_type == TIMING_PARAMETER_TYPE.SET_TO_GIVEN_VALUES
    read_values = (
      timing_parameter_type == TIMING_PARAMETER_TYPE.READ_CURRENTLY_ACTIVE or
      timing_parameter_type == TIMING_PARAMETER_TYPE.READ_EXTENDED_SET
    )
    if not write_custom_values and parameter_values is not None:
      raise ValueError('parameter_values not allowed')
    if write_custom_values and parameter_values is None:
      raise ValueError('parameter_values is missing')
    resp = self._uds_request(SERVICE_TYPE.ACCESS_TIMING_PARAMETER, subfunction=timing_parameter_type, data=parameter_values)
    if read_values:
      # TODO: parse response into values?
      parameter_values = resp
      return parameter_values

  def secured_data_transmission(self, data: bytes):
    # TODO: split data into multiple input parameters?
    resp = self._uds_request(SERVICE_TYPE.SECURED_DATA_TRANSMISSION, subfunction=None, data=data)
    # TODO: parse response into multiple output values?
    return resp

  def control_dtc_setting(self, dtc_setting_type: DTC_SETTING_TYPE):
    self._uds_request(SERVICE_TYPE.CONTROL_DTC_SETTING, subfunction=dtc_setting_type)

  def response_on_event(self, response_event_type: RESPONSE_EVENT_TYPE, store_event: bool, window_time: int, event_type_record: int, service_response_record: int):
    if store_event:
      response_event_type |= 0x20
    # TODO: split record parameters into arrays
    data = bytes([window_time, event_type_record, service_response_record])
    resp = self._uds_request(SERVICE_TYPE.RESPONSE_ON_EVENT, subfunction=response_event_type, data=data)

    if response_event_type == RESPONSE_EVENT_TYPE.REPORT_ACTIVATED_EVENTS:
      return {
        "num_of_activated_events": resp[0],
        "data": resp[1:], # TODO: parse the reset of response
      }

    return {
      "num_of_identified_events": resp[0],
      "event_window_time": resp[1],
      "data": resp[2:], # TODO: parse the reset of response
    }

  def link_control(self, link_control_type: LINK_CONTROL_TYPE, baud_rate_type: BAUD_RATE_TYPE=None):
    if link_control_type == LINK_CONTROL_TYPE.VERIFY_BAUDRATE_TRANSITION_WITH_FIXED_BAUDRATE:
      # baud_rate_type = BAUD_RATE_TYPE
      data = bytes([baud_rate_type])
    elif link_control_type == LINK_CONTROL_TYPE.VERIFY_BAUDRATE_TRANSITION_WITH_SPECIFIC_BAUDRATE:
      # baud_rate_type = custom value (3 bytes big-endian)
      data = struct.pack('!I', baud_rate_type)[1:]
    else:
      data = None
    self._uds_request(SERVICE_TYPE.LINK_CONTROL, subfunction=link_control_type, data=data)

  def read_data_by_identifier(self, data_identifier_type: DATA_IDENTIFIER_TYPE):
    # TODO: support list of identifiers
    data = struct.pack('!H', data_identifier_type)
    resp = self._uds_request(SERVICE_TYPE.READ_DATA_BY_IDENTIFIER, subfunction=None, data=data)
    resp_id = struct.unpack('!H', resp[0:2])[0] if len(resp) >= 2 else None
    if resp_id != data_identifier_type:
      raise ValueError('invalid response data identifier: {}'.format(hex(resp_id)))
    return resp[2:]

  def read_memory_by_address(self, memory_address: int, memory_size: int, memory_address_bytes: int=4, memory_size_bytes: int=1):
    if memory_address_bytes < 1 or memory_address_bytes > 4:
      raise ValueError('invalid memory_address_bytes: {}'.format(memory_address_bytes))
    if memory_size_bytes < 1 or memory_size_bytes > 4:
      raise ValueError('invalid memory_size_bytes: {}'.format(memory_size_bytes))
    data = bytes([memory_size_bytes<<4 | memory_address_bytes])

    if memory_address >= 1<<(memory_address_bytes*8):
      raise ValueError('invalid memory_address: {}'.format(memory_address))
    data += struct.pack('!I', memory_address)[4-memory_address_bytes:]
    if memory_size >= 1<<(memory_size_bytes*8):
      raise ValueError('invalid memory_size: {}'.format(memory_size))
    data += struct.pack('!I', memory_size)[4-memory_size_bytes:]

    resp = self._uds_request(SERVICE_TYPE.READ_MEMORY_BY_ADDRESS, subfunction=None, data=data)
    return resp

  def read_scaling_data_by_identifier(self, data_identifier_type: DATA_IDENTIFIER_TYPE):
    data = struct.pack('!H', data_identifier_type)
    resp = self._uds_request(SERVICE_TYPE.READ_SCALING_DATA_BY_IDENTIFIER, subfunction=None, data=data)
    resp_id = struct.unpack('!H', resp[0:2])[0] if len(resp) >= 2 else None
    if resp_id != data_identifier_type:
      raise ValueError('invalid response data identifier: {}'.format(hex(resp_id)))
    return resp[2:] # TODO: parse the response

  def read_data_by_periodic_identifier(self, transmission_mode_type: TRANSMISSION_MODE_TYPE, periodic_data_identifier: int):
    # TODO: support list of identifiers
    data = bytes([transmission_mode_type, periodic_data_identifier])
    self._uds_request(SERVICE_TYPE.READ_DATA_BY_PERIODIC_IDENTIFIER, subfunction=None, data=data)

  def dynamically_define_data_identifier(self, dynamic_definition_type: DYNAMIC_DEFINITION_TYPE, dynamic_data_identifier: int, source_definitions: List[DynamicSourceDefinition], memory_address_bytes: int=4, memory_size_bytes: int=1):
    if memory_address_bytes < 1 or memory_address_bytes > 4:
      raise ValueError('invalid memory_address_bytes: {}'.format(memory_address_bytes))
    if memory_size_bytes < 1 or memory_size_bytes > 4:
      raise ValueError('invalid memory_size_bytes: {}'.format(memory_size_bytes))

    data = struct.pack('!H', dynamic_data_identifier)
    if dynamic_definition_type == DYNAMIC_DEFINITION_TYPE.DEFINE_BY_IDENTIFIER:
      for s in source_definitions:
        data += struct.pack('!H', s["data_identifier"]) + bytes([s["position"], s["memory_size"]])
    elif dynamic_definition_type == DYNAMIC_DEFINITION_TYPE.DEFINE_BY_MEMORY_ADDRESS:
      data += bytes([memory_size_bytes<<4 | memory_address_bytes])
      for s in source_definitions:
        if s["memory_address"] >= 1<<(memory_address_bytes*8):
          raise ValueError('invalid memory_address: {}'.format(s["memory_address"]))
        data += struct.pack('!I', s["memory_address"])[4-memory_address_bytes:]
        if s["memory_size"] >= 1<<(memory_size_bytes*8):
          raise ValueError('invalid memory_size: {}'.format(s["memory_size"]))
        data += struct.pack('!I', s["memory_size"])[4-memory_size_bytes:]
    elif dynamic_definition_type == DYNAMIC_DEFINITION_TYPE.CLEAR_DYNAMICALLY_DEFINED_DATA_IDENTIFIER:
      pass
    else:
      raise ValueError('invalid dynamic identifier type: {}'.format(hex(dynamic_definition_type)))
    self._uds_request(SERVICE_TYPE.DYNAMICALLY_DEFINE_DATA_IDENTIFIER, subfunction=dynamic_definition_type, data=data)

  def write_data_by_identifier(self, data_identifier_type: DATA_IDENTIFIER_TYPE, data_record: bytes):
    data = struct.pack('!H', data_identifier_type) + data_record
    resp = self._uds_request(SERVICE_TYPE.WRITE_DATA_BY_IDENTIFIER, subfunction=None, data=data)
    resp_id = struct.unpack('!H', resp[0:2])[0] if len(resp) >= 2 else None
    if resp_id != data_identifier_type:
      raise ValueError('invalid response data identifier: {}'.format(hex(resp_id)))

  def write_memory_by_address(self, memory_address: int, memory_size: int, data_record: bytes, memory_address_bytes: int=4, memory_size_bytes: int=1):
    if memory_address_bytes < 1 or memory_address_bytes > 4:
      raise ValueError('invalid memory_address_bytes: {}'.format(memory_address_bytes))
    if memory_size_bytes < 1 or memory_size_bytes > 4:
      raise ValueError('invalid memory_size_bytes: {}'.format(memory_size_bytes))
    data = bytes([memory_size_bytes<<4 | memory_address_bytes])

    if memory_address >= 1<<(memory_address_bytes*8):
      raise ValueError('invalid memory_address: {}'.format(memory_address))
    data += struct.pack('!I', memory_address)[4-memory_address_bytes:]
    if memory_size >= 1<<(memory_size_bytes*8):
      raise ValueError('invalid memory_size: {}'.format(memory_size))
    data += struct.pack('!I', memory_size)[4-memory_size_bytes:]

    data += data_record
    self._uds_request(SERVICE_TYPE.WRITE_MEMORY_BY_ADDRESS, subfunction=0x00, data=data)

  def clear_diagnostic_information(self, dtc_group_type: DTC_GROUP_TYPE):
    data = struct.pack('!I', dtc_group_type)[1:] # 3 bytes
    self._uds_request(SERVICE_TYPE.CLEAR_DIAGNOSTIC_INFORMATION, subfunction=None, data=data)

  def read_dtc_information(self, dtc_report_type: DTC_REPORT_TYPE, dtc_status_mask_type: DTC_STATUS_MASK_TYPE=DTC_STATUS_MASK_TYPE.ALL, dtc_severity_mask_type: DTC_SEVERITY_MASK_TYPE=DTC_SEVERITY_MASK_TYPE.ALL, dtc_mask_record: int=0xFFFFFF, dtc_snapshot_record_num: int=0xFF, dtc_extended_record_num: int=0xFF):
    data = b''
    # dtc_status_mask_type
    if dtc_report_type == DTC_REPORT_TYPE.NUMBER_OF_DTC_BY_STATUS_MASK or \
      dtc_report_type == DTC_REPORT_TYPE.DTC_BY_STATUS_MASK or \
      dtc_report_type == DTC_REPORT_TYPE.MIRROR_MEMORY_DTC_BY_STATUS_MASK or \
      dtc_report_type == DTC_REPORT_TYPE.NUMBER_OF_MIRROR_MEMORY_DTC_BY_STATUS_MASK or \
      dtc_report_type == DTC_REPORT_TYPE.NUMBER_OF_EMISSIONS_RELATED_OBD_DTC_BY_STATUS_MASK or \
      dtc_report_type == DTC_REPORT_TYPE.EMISSIONS_RELATED_OBD_DTC_BY_STATUS_MASK:
      data += bytes([dtc_status_mask_type])
    # dtc_mask_record
    if dtc_report_type == DTC_REPORT_TYPE.DTC_SNAPSHOT_IDENTIFICATION or \
      dtc_report_type == DTC_REPORT_TYPE.DTC_SNAPSHOT_RECORD_BY_DTC_NUMBER or \
      dtc_report_type == DTC_REPORT_TYPE.DTC_EXTENDED_DATA_RECORD_BY_DTC_NUMBER or \
      dtc_report_type == DTC_REPORT_TYPE.MIRROR_MEMORY_DTC_EXTENDED_DATA_RECORD_BY_DTC_NUMBER or \
      dtc_report_type == DTC_REPORT_TYPE.SEVERITY_INFORMATION_OF_DTC:
      data += struct.pack('!I', dtc_mask_record)[1:] # 3 bytes
    # dtc_snapshot_record_num
    if dtc_report_type == DTC_REPORT_TYPE.DTC_SNAPSHOT_IDENTIFICATION or \
      dtc_report_type == DTC_REPORT_TYPE.DTC_SNAPSHOT_RECORD_BY_DTC_NUMBER or \
      dtc_report_type == DTC_REPORT_TYPE.DTC_SNAPSHOT_RECORD_BY_RECORD_NUMBER:
      data += ord(dtc_snapshot_record_num)
    # dtc_extended_record_num
    if dtc_report_type == DTC_REPORT_TYPE.DTC_EXTENDED_DATA_RECORD_BY_DTC_NUMBER or \
      dtc_report_type == DTC_REPORT_TYPE.MIRROR_MEMORY_DTC_EXTENDED_DATA_RECORD_BY_DTC_NUMBER:
      data += bytes([dtc_extended_record_num])
    # dtc_severity_mask_type
    if dtc_report_type == DTC_REPORT_TYPE.NUMBER_OF_DTC_BY_SEVERITY_MASK_RECORD or \
      dtc_report_type == DTC_REPORT_TYPE.DTC_BY_SEVERITY_MASK_RECORD:
      data += bytes([dtc_severity_mask_type, dtc_status_mask_type])
    
    resp = self._uds_request(SERVICE_TYPE.READ_DTC_INFORMATION, subfunction=dtc_report_type, data=data)

    # TODO: parse response
    return resp

  def input_output_control_by_identifier(self, data_identifier_type: DATA_IDENTIFIER_TYPE, control_parameter_type: CONTROL_PARAMETER_TYPE, control_option_record: bytes, control_enable_mask_record: bytes=b''):
    data = struct.pack('!H', data_identifier_type) + bytes([control_parameter_type]) + control_option_record + control_enable_mask_record
    resp = self._uds_request(SERVICE_TYPE.INPUT_OUTPUT_CONTROL_BY_IDENTIFIER, subfunction=None, data=data)
    resp_id = struct.unpack('!H', resp[0:2])[0] if len(resp) >= 2 else None
    if resp_id != data_identifier_type:
      raise ValueError('invalid response data identifier: {}'.format(hex(resp_id)))
    return resp[2:]

  def routine_control(self, routine_control_type: ROUTINE_CONTROL_TYPE, routine_identifier_type: ROUTINE_IDENTIFIER_TYPE, routine_option_record: bytes=b''):
    data = struct.pack('!H', routine_identifier_type) + routine_option_record
    resp = self._uds_request(SERVICE_TYPE.ROUTINE_CONTROL, subfunction=routine_control_type, data=data)
    resp_id = struct.unpack('!H', resp[0:2])[0] if len(resp) >= 2 else None
    if resp_id != routine_identifier_type:
      raise ValueError('invalid response routine identifier: {}'.format(hex(resp_id)))
    return resp[2:]

  def request_download(self, memory_address: int, memory_size: int, memory_address_bytes: int=4, memory_size_bytes: int=4, data_format: int=0x00):
    data = bytes([data_format])

    if memory_address_bytes < 1 or memory_address_bytes > 4:
      raise ValueError('invalid memory_address_bytes: {}'.format(memory_address_bytes))
    if memory_size_bytes < 1 or memory_size_bytes > 4:
      raise ValueError('invalid memory_size_bytes: {}'.format(memory_size_bytes))
    data += bytes([memory_size_bytes<<4 | memory_address_bytes])

    if memory_address >= 1<<(memory_address_bytes*8):
      raise ValueError('invalid memory_address: {}'.format(memory_address))
    data += struct.pack('!I', memory_address)[4-memory_address_bytes:]
    if memory_size >= 1<<(memory_size_bytes*8):
      raise ValueError('invalid memory_size: {}'.format(memory_size))
    data += struct.pack('!I', memory_size)[4-memory_size_bytes:]

    resp = self._uds_request(SERVICE_TYPE.REQUEST_DOWNLOAD, subfunction=None, data=data)
    max_num_bytes_len = resp[0] >> 4 if len(resp) > 0 else None
    if max_num_bytes_len >= 1 and max_num_bytes_len <= 4:
      max_num_bytes = struct.unpack('!I', (b"\x00"*(4-max_num_bytes_len))+resp[1:max_num_bytes_len+1])[0]
    else:
      raise ValueError('invalid max_num_bytes_len: {}'.format(max_num_bytes_len))

    return max_num_bytes # max number of bytes per transfer data request

  def request_upload(self, memory_address: int, memory_size: int, memory_address_bytes: int=4, memory_size_bytes: int=4, data_format: int=0x00):
    data = bytes([data_format])

    if memory_address_bytes < 1 or memory_address_bytes > 4:
      raise ValueError('invalid memory_address_bytes: {}'.format(memory_address_bytes))
    if memory_size_bytes < 1 or memory_size_bytes > 4:
      raise ValueError('invalid memory_size_bytes: {}'.format(memory_size_bytes))
    data += bytes([memory_size_bytes<<4 | memory_address_bytes])

    if memory_address >= 1<<(memory_address_bytes*8):
      raise ValueError('invalid memory_address: {}'.format(memory_address))
    data += struct.pack('!I', memory_address)[4-memory_address_bytes:]
    if memory_size >= 1<<(memory_size_bytes*8):
      raise ValueError('invalid memory_size: {}'.format(memory_size))
    data += struct.pack('!I', memory_size)[4-memory_size_bytes:]

    resp = self._uds_request(SERVICE_TYPE.REQUEST_UPLOAD, subfunction=None, data=data)
    max_num_bytes_len = resp[0] >> 4 if len(resp) > 0 else None
    if max_num_bytes_len >= 1 and max_num_bytes_len <= 4:
      max_num_bytes = struct.unpack('!I', (b"\x00"*(4-max_num_bytes_len))+resp[1:max_num_bytes_len+1])[0]
    else:
      raise ValueError('invalid max_num_bytes_len: {}'.format(max_num_bytes_len))

    return max_num_bytes # max number of bytes per transfer data request

  def transfer_data(self, block_sequence_count: int, data: bytes=b''):
    data = bytes([block_sequence_count]) + data
    resp = self._uds_request(SERVICE_TYPE.TRANSFER_DATA, subfunction=None, data=data)
    resp_id = resp[0] if len(resp) > 0 else None
    if resp_id != block_sequence_count:
      raise ValueError('invalid block_sequence_count: {}'.format(resp_id))
    return resp[1:]

  def request_transfer_exit(self):
    self._uds_request(SERVICE_TYPE.REQUEST_TRANSFER_EXIT, subfunction=None)