#!/usr/bin/env python3
from cereal import car
from selfdrive . config import Conversions as CV
from selfdrive . controls . lib . drive_helpers import create_event , EventTypes as ET
from selfdrive . controls . lib . vehicle_model import VehicleModel
from selfdrive . car . gm . values import DBC , CAR , ECU , ECU_FINGERPRINT , \
SUPERCRUISE_CARS , AccState , FINGERPRINTS
from selfdrive . car . gm . carstate import CarState , CruiseButtons , get_powertrain_can_parser
from selfdrive . car import STD_CARGO_KG , scale_rot_inertia , scale_tire_stiffness , is_ecu_disconnected , gen_empty_fingerprint
from selfdrive . car . interfaces import CarInterfaceBase
ButtonType = car . CarState . ButtonEvent . Type
class CanBus ( CarInterfaceBase ) :
def __init__ ( self ) :
self . powertrain = 0
self . obstacle = 1
self . chassis = 2
self . sw_gmlan = 3
class CarInterface ( CarInterfaceBase ) :
def __init__ ( self , CP , CarController ) :
self . CP = CP
self . frame = 0
self . gas_pressed_prev = False
self . brake_pressed_prev = False
self . acc_active_prev = 0
# *** init the major players ***
canbus = CanBus ( )
self . CS = CarState ( CP , canbus )
self . VM = VehicleModel ( CP )
self . pt_cp = get_powertrain_can_parser ( CP , canbus )
self . ch_cp_dbc_name = DBC [ CP . carFingerprint ] [ ' chassis ' ]
self . CC = None
if CarController is not None :
self . CC = CarController ( canbus , CP . carFingerprint )
@staticmethod
def compute_gb ( accel , speed ) :
return float ( accel ) / 4.0
@staticmethod
def get_params ( candidate , fingerprint = gen_empty_fingerprint ( ) , has_relay = False , car_fw = [ ] ) :
ret = car . CarParams . new_message ( )
ret . carName = " gm "
ret . carFingerprint = candidate
ret . isPandaBlack = has_relay
ret . enableCruise = False
# GM port is considered a community feature, since it disables AEB;
# TODO: make a port that uses a car harness and it only intercepts the camera
ret . communityFeature = True
# Presence of a camera on the object bus is ok.
# Have to go to read_only if ASCM is online (ACC-enabled cars),
# or camera is on powertrain bus (LKA cars without ACC).
ret . enableCamera = is_ecu_disconnected ( fingerprint [ 0 ] , FINGERPRINTS , ECU_FINGERPRINT , candidate , ECU . CAM ) or \
has_relay or \
candidate == CAR . CADILLAC_CT6
ret . openpilotLongitudinalControl = ret . enableCamera
tire_stiffness_factor = 0.444 # not optimized yet
if candidate == CAR . VOLT :
# supports stop and go, but initial engage must be above 18mph (which include conservatism)
ret . minEnableSpeed = 18 * CV . MPH_TO_MS
ret . mass = 1607. + STD_CARGO_KG
ret . safetyModel = car . CarParams . SafetyModel . gm
ret . wheelbase = 2.69
ret . steerRatio = 15.7
ret . steerRatioRear = 0.
ret . centerToFront = ret . wheelbase * 0.4 # wild guess
elif candidate == CAR . MALIBU :
# supports stop and go, but initial engage must be above 18mph (which include conservatism)
ret . minEnableSpeed = 18 * CV . MPH_TO_MS
ret . mass = 1496. + STD_CARGO_KG
ret . safetyModel = car . CarParams . SafetyModel . gm
ret . wheelbase = 2.83
ret . steerRatio = 15.8
ret . steerRatioRear = 0.
ret . centerToFront = ret . wheelbase * 0.4 # wild guess
elif candidate == CAR . HOLDEN_ASTRA :
ret . mass = 1363. + STD_CARGO_KG
ret . wheelbase = 2.662
# Remaining parameters copied from Volt for now
ret . centerToFront = ret . wheelbase * 0.4
ret . minEnableSpeed = 18 * CV . MPH_TO_MS
ret . safetyModel = car . CarParams . SafetyModel . gm
ret . steerRatio = 15.7
ret . steerRatioRear = 0.
elif candidate == CAR . ACADIA :
getting ready for Python 3 (#619)
* tabs to spaces
python 2 to 3: https://portingguide.readthedocs.io/en/latest/syntax.html#tabs-and-spaces
* use the new except syntax
python 2 to 3: https://portingguide.readthedocs.io/en/latest/exceptions.html#the-new-except-syntax
* make relative imports absolute
python 2 to 3: https://portingguide.readthedocs.io/en/latest/imports.html#absolute-imports
* Queue renamed to queue in python 3
Use the six compatibility library to support both python 2 and 3: https://portingguide.readthedocs.io/en/latest/stdlib-reorg.html#renamed-modules
* replace dict.has_key() with in
python 2 to 3: https://portingguide.readthedocs.io/en/latest/dicts.html#removed-dict-has-key
* make dict views compatible with python 3
python 2 to 3: https://portingguide.readthedocs.io/en/latest/dicts.html#dict-views-and-iterators
Where needed, wrapping things that will be a view in python 3 with a list(). For example, if it's accessed with []
Python 3 has no iter*() methods, so just using the values() instead of itervalues() as long as it's not too performance intensive. Note that any minor performance hit of using a list instead of a view will go away when switching to python 3. If it is intensive, we could use the six version.
* Explicitly use truncating division
python 2 to 3: https://portingguide.readthedocs.io/en/latest/numbers.html#division
python 3 treats / as float division. When we want the result to be an integer, use //
* replace map() with list comprehension where a list result is needed.
In python 3, map() returns an iterator.
python 2 to 3: https://portingguide.readthedocs.io/en/latest/iterators.html#new-behavior-of-map-and-filter
* replace filter() with list comprehension
In python 3, filter() returns an interatoooooooooooor.
python 2 to 3: https://portingguide.readthedocs.io/en/latest/iterators.html#new-behavior-of-map-and-filter
* wrap zip() in list() where we need the result to be a list
python 2 to 3: https://portingguide.readthedocs.io/en/latest/iterators.html#new-behavior-of-zip
* clean out some lint
Removes these pylint warnings:
************* Module selfdrive.car.chrysler.chryslercan
W: 15, 0: Unnecessary semicolon (unnecessary-semicolon)
W: 16, 0: Unnecessary semicolon (unnecessary-semicolon)
W: 25, 0: Unnecessary semicolon (unnecessary-semicolon)
************* Module common.dbc
W:101, 0: Anomalous backslash in string: '\?'. String constant might be missing an r prefix. (anomalous-backslash-in-string)
************* Module selfdrive.car.gm.interface
R:102, 6: Redefinition of ret.minEnableSpeed type from float to int (redefined-variable-type)
R:103, 6: Redefinition of ret.mass type from int to float (redefined-variable-type)
************* Module selfdrive.updated
R: 20, 6: Redefinition of r type from int to str (redefined-variable-type)
old-commit-hash: 9dae0bfac4e54ec2b2e488d2b4ead1495c8f56d8
6 years ago
ret . minEnableSpeed = - 1. # engage speed is decided by pcm
ret . mass = 4353. * CV . LB_TO_KG + STD_CARGO_KG
ret . safetyModel = car . CarParams . SafetyModel . gm
ret . wheelbase = 2.86
ret . steerRatio = 14.4 #end to end is 13.46
ret . steerRatioRear = 0.
ret . centerToFront = ret . wheelbase * 0.4
elif candidate == CAR . BUICK_REGAL :
ret . minEnableSpeed = 18 * CV . MPH_TO_MS
ret . mass = 3779. * CV . LB_TO_KG + STD_CARGO_KG # (3849+3708)/2
ret . safetyModel = car . CarParams . SafetyModel . gm
ret . wheelbase = 2.83 #111.4 inches in meters
ret . steerRatio = 14.4 # guess for tourx
ret . steerRatioRear = 0.
ret . centerToFront = ret . wheelbase * 0.4 # guess for tourx
elif candidate == CAR . CADILLAC_ATS :
ret . minEnableSpeed = 18 * CV . MPH_TO_MS
ret . mass = 1601. + STD_CARGO_KG
ret . safetyModel = car . CarParams . SafetyModel . gm
ret . wheelbase = 2.78
ret . steerRatio = 15.3
ret . steerRatioRear = 0.
ret . centerToFront = ret . wheelbase * 0.49
elif candidate == CAR . CADILLAC_CT6 :
# engage speed is decided by pcm
getting ready for Python 3 (#619)
* tabs to spaces
python 2 to 3: https://portingguide.readthedocs.io/en/latest/syntax.html#tabs-and-spaces
* use the new except syntax
python 2 to 3: https://portingguide.readthedocs.io/en/latest/exceptions.html#the-new-except-syntax
* make relative imports absolute
python 2 to 3: https://portingguide.readthedocs.io/en/latest/imports.html#absolute-imports
* Queue renamed to queue in python 3
Use the six compatibility library to support both python 2 and 3: https://portingguide.readthedocs.io/en/latest/stdlib-reorg.html#renamed-modules
* replace dict.has_key() with in
python 2 to 3: https://portingguide.readthedocs.io/en/latest/dicts.html#removed-dict-has-key
* make dict views compatible with python 3
python 2 to 3: https://portingguide.readthedocs.io/en/latest/dicts.html#dict-views-and-iterators
Where needed, wrapping things that will be a view in python 3 with a list(). For example, if it's accessed with []
Python 3 has no iter*() methods, so just using the values() instead of itervalues() as long as it's not too performance intensive. Note that any minor performance hit of using a list instead of a view will go away when switching to python 3. If it is intensive, we could use the six version.
* Explicitly use truncating division
python 2 to 3: https://portingguide.readthedocs.io/en/latest/numbers.html#division
python 3 treats / as float division. When we want the result to be an integer, use //
* replace map() with list comprehension where a list result is needed.
In python 3, map() returns an iterator.
python 2 to 3: https://portingguide.readthedocs.io/en/latest/iterators.html#new-behavior-of-map-and-filter
* replace filter() with list comprehension
In python 3, filter() returns an interatoooooooooooor.
python 2 to 3: https://portingguide.readthedocs.io/en/latest/iterators.html#new-behavior-of-map-and-filter
* wrap zip() in list() where we need the result to be a list
python 2 to 3: https://portingguide.readthedocs.io/en/latest/iterators.html#new-behavior-of-zip
* clean out some lint
Removes these pylint warnings:
************* Module selfdrive.car.chrysler.chryslercan
W: 15, 0: Unnecessary semicolon (unnecessary-semicolon)
W: 16, 0: Unnecessary semicolon (unnecessary-semicolon)
W: 25, 0: Unnecessary semicolon (unnecessary-semicolon)
************* Module common.dbc
W:101, 0: Anomalous backslash in string: '\?'. String constant might be missing an r prefix. (anomalous-backslash-in-string)
************* Module selfdrive.car.gm.interface
R:102, 6: Redefinition of ret.minEnableSpeed type from float to int (redefined-variable-type)
R:103, 6: Redefinition of ret.mass type from int to float (redefined-variable-type)
************* Module selfdrive.updated
R: 20, 6: Redefinition of r type from int to str (redefined-variable-type)
old-commit-hash: 9dae0bfac4e54ec2b2e488d2b4ead1495c8f56d8
6 years ago
ret . minEnableSpeed = - 1.
ret . mass = 4016. * CV . LB_TO_KG + STD_CARGO_KG
ret . safetyModel = car . CarParams . SafetyModel . cadillac
ret . wheelbase = 3.11
ret . steerRatio = 14.6 # it's 16.3 without rear active steering
ret . steerRatioRear = 0. # TODO: there is RAS on this car!
ret . centerToFront = ret . wheelbase * 0.465
# TODO: get actual value, for now starting with reasonable value for
# civic and scaling by mass and wheelbase
ret . rotationalInertia = scale_rot_inertia ( ret . mass , ret . wheelbase )
# TODO: start from empirically derived lateral slip stiffness for the civic and scale by
# mass and CG position, so all cars will have approximately similar dyn behaviors
ret . tireStiffnessFront , ret . tireStiffnessRear = scale_tire_stiffness ( ret . mass , ret . wheelbase , ret . centerToFront ,
tire_stiffness_factor = tire_stiffness_factor )
# same tuning for Volt and CT6 for now
ret . lateralTuning . pid . kiBP , ret . lateralTuning . pid . kpBP = [ [ 0. ] , [ 0. ] ]
ret . lateralTuning . pid . kpV , ret . lateralTuning . pid . kiV = [ [ 0.2 ] , [ 0.00 ] ]
ret . lateralTuning . pid . kf = 0.00004 # full torque for 20 deg at 80mph means 0.00007818594
ret . steerMaxBP = [ 0. ] # m/s
ret . steerMaxV = [ 1. ]
ret . gasMaxBP = [ 0. ]
ret . gasMaxV = [ .5 ]
ret . brakeMaxBP = [ 0. ]
ret . brakeMaxV = [ 1. ]
ret . longitudinalTuning . kpBP = [ 5. , 35. ]
ret . longitudinalTuning . kpV = [ 2.4 , 1.5 ]
ret . longitudinalTuning . kiBP = [ 0. ]
ret . longitudinalTuning . kiV = [ 0.36 ]
ret . longitudinalTuning . deadzoneBP = [ 0. ]
ret . longitudinalTuning . deadzoneV = [ 0. ]
ret . stoppingControl = True
ret . startAccel = 0.8
ret . steerActuatorDelay = 0.1 # Default delay, not measured yet
ret . steerRateCost = 1.0
ret . steerLimitTimer = 0.4
ret . radarTimeStep = 0.0667 # GM radar runs at 15Hz instead of standard 20Hz
ret . steerControlType = car . CarParams . SteerControlType . torque
return ret
# returns a car.CarState
def update ( self , c , can_strings ) :
self . pt_cp . update_strings ( can_strings )
self . CS . update ( self . pt_cp )
# create message
ret = car . CarState . new_message ( )
ret . canValid = self . pt_cp . can_valid
# speeds
ret . vEgo = self . CS . v_ego
ret . aEgo = self . CS . a_ego
ret . vEgoRaw = self . CS . v_ego_raw
ret . yawRate = self . VM . yaw_rate ( self . CS . angle_steers * CV . DEG_TO_RAD , self . CS . v_ego )
ret . standstill = self . CS . standstill
ret . wheelSpeeds . fl = self . CS . v_wheel_fl
ret . wheelSpeeds . fr = self . CS . v_wheel_fr
ret . wheelSpeeds . rl = self . CS . v_wheel_rl
ret . wheelSpeeds . rr = self . CS . v_wheel_rr
# gas pedal information.
ret . gas = self . CS . pedal_gas / 254.0
ret . gasPressed = self . CS . user_gas_pressed
# brake pedal
ret . brake = self . CS . user_brake / 0xd0
ret . brakePressed = self . CS . brake_pressed
# steering wheel
ret . steeringAngle = self . CS . angle_steers
# torque and user override. Driver awareness
# timer resets when the user uses the steering wheel.
ret . steeringPressed = self . CS . steer_override
ret . steeringTorque = self . CS . steer_torque_driver
ret . steeringRateLimited = self . CC . steer_rate_limited if self . CC is not None else False
# cruise state
ret . cruiseState . available = bool ( self . CS . main_on )
cruiseEnabled = self . CS . pcm_acc_status != AccState . OFF
ret . cruiseState . enabled = cruiseEnabled
ret . cruiseState . standstill = self . CS . pcm_acc_status == 4
ret . leftBlinker = self . CS . left_blinker_on
ret . rightBlinker = self . CS . right_blinker_on
ret . doorOpen = not self . CS . door_all_closed
ret . seatbeltUnlatched = not self . CS . seatbelt
ret . gearShifter = self . CS . gear_shifter
buttonEvents = [ ]
# blinkers
if self . CS . left_blinker_on != self . CS . prev_left_blinker_on :
be = car . CarState . ButtonEvent . new_message ( )
be . type = ButtonType . leftBlinker
be . pressed = self . CS . left_blinker_on
buttonEvents . append ( be )
if self . CS . right_blinker_on != self . CS . prev_right_blinker_on :
be = car . CarState . ButtonEvent . new_message ( )
be . type = ButtonType . rightBlinker
be . pressed = self . CS . right_blinker_on
buttonEvents . append ( be )
if self . CS . cruise_buttons != self . CS . prev_cruise_buttons :
be = car . CarState . ButtonEvent . new_message ( )
be . type = ButtonType . unknown
if self . CS . cruise_buttons != CruiseButtons . UNPRESS :
be . pressed = True
but = self . CS . cruise_buttons
else :
be . pressed = False
but = self . CS . prev_cruise_buttons
if but == CruiseButtons . RES_ACCEL :
if not ( cruiseEnabled and self . CS . standstill ) :
be . type = ButtonType . accelCruise # Suppress resume button if we're resuming from stop so we don't adjust speed.
elif but == CruiseButtons . DECEL_SET :
be . type = ButtonType . decelCruise
elif but == CruiseButtons . CANCEL :
be . type = ButtonType . cancel
elif but == CruiseButtons . MAIN :
be . type = ButtonType . altButton3
buttonEvents . append ( be )
ret . buttonEvents = buttonEvents
events = [ ]
if self . CS . steer_error :
events . append ( create_event ( ' steerUnavailable ' , [ ET . NO_ENTRY , ET . IMMEDIATE_DISABLE , ET . PERMANENT ] ) )
if self . CS . steer_not_allowed :
events . append ( create_event ( ' steerTempUnavailable ' , [ ET . NO_ENTRY , ET . WARNING ] ) )
if ret . doorOpen :
events . append ( create_event ( ' doorOpen ' , [ ET . NO_ENTRY , ET . SOFT_DISABLE ] ) )
if ret . seatbeltUnlatched :
events . append ( create_event ( ' seatbeltNotLatched ' , [ ET . NO_ENTRY , ET . SOFT_DISABLE ] ) )
if self . CS . car_fingerprint in SUPERCRUISE_CARS :
if self . CS . acc_active and not self . acc_active_prev :
events . append ( create_event ( ' pcmEnable ' , [ ET . ENABLE ] ) )
if not self . CS . acc_active :
events . append ( create_event ( ' pcmDisable ' , [ ET . USER_DISABLE ] ) )
else :
if self . CS . brake_error :
events . append ( create_event ( ' brakeUnavailable ' , [ ET . NO_ENTRY , ET . IMMEDIATE_DISABLE , ET . PERMANENT ] ) )
if not self . CS . gear_shifter_valid :
events . append ( create_event ( ' wrongGear ' , [ ET . NO_ENTRY , ET . SOFT_DISABLE ] ) )
if self . CS . esp_disabled :
events . append ( create_event ( ' espDisabled ' , [ ET . NO_ENTRY , ET . SOFT_DISABLE ] ) )
if not self . CS . main_on :
events . append ( create_event ( ' wrongCarMode ' , [ ET . NO_ENTRY , ET . USER_DISABLE ] ) )
if self . CS . gear_shifter == 3 :
events . append ( create_event ( ' reverseGear ' , [ ET . NO_ENTRY , ET . IMMEDIATE_DISABLE ] ) )
if ret . vEgo < self . CP . minEnableSpeed :
events . append ( create_event ( ' speedTooLow ' , [ ET . NO_ENTRY ] ) )
if self . CS . park_brake :
events . append ( create_event ( ' parkBrake ' , [ ET . NO_ENTRY , ET . USER_DISABLE ] ) )
# disable on pedals rising edge or when brake is pressed and speed isn't zero
if ( ret . gasPressed and not self . gas_pressed_prev ) or \
( ret . brakePressed ) : # and (not self.brake_pressed_prev or ret.vEgo > 0.001)):
events . append ( create_event ( ' pedalPressed ' , [ ET . NO_ENTRY , ET . USER_DISABLE ] ) )
if ret . gasPressed :
events . append ( create_event ( ' pedalPressed ' , [ ET . PRE_ENABLE ] ) )
if ret . cruiseState . standstill :
events . append ( create_event ( ' resumeRequired ' , [ ET . WARNING ] ) )
if self . CS . pcm_acc_status == AccState . FAULTED :
events . append ( create_event ( ' controlsFailed ' , [ ET . NO_ENTRY , ET . IMMEDIATE_DISABLE ] ) )
# handle button presses
for b in ret . buttonEvents :
# do enable on both accel and decel buttons
if b . type in [ ButtonType . accelCruise , ButtonType . decelCruise ] and not b . pressed :
events . append ( create_event ( ' buttonEnable ' , [ ET . ENABLE ] ) )
# do disable on button down
if b . type == ButtonType . cancel and b . pressed :
events . append ( create_event ( ' buttonCancel ' , [ ET . USER_DISABLE ] ) )
ret . events = events
# update previous brake/gas pressed
self . acc_active_prev = self . CS . acc_active
self . gas_pressed_prev = ret . gasPressed
self . brake_pressed_prev = ret . brakePressed
# cast to reader so it can't be modified
return ret . as_reader ( )
# pass in a car.CarControl
# to be called @ 100hz
def apply ( self , c ) :
hud_v_cruise = c . hudControl . setSpeed
if hud_v_cruise > 70 :
hud_v_cruise = 0
# For Openpilot, "enabled" includes pre-enable.
# In GM, PCM faults out if ACC command overlaps user gas.
enabled = c . enabled and not self . CS . user_gas_pressed
can_sends = self . CC . update ( enabled , self . CS , self . frame , \
c . actuators ,
hud_v_cruise , c . hudControl . lanesVisible , \
c . hudControl . leadVisible , c . hudControl . visualAlert )
self . frame + = 1
return can_sends
