diff --git a/selfdrive/car/toyota/carcontroller.py b/selfdrive/car/toyota/carcontroller.py
index c79a471465..f8987af66c 100644
--- a/selfdrive/car/toyota/carcontroller.py
+++ b/selfdrive/car/toyota/carcontroller.py
@@ -85,7 +85,7 @@ class CarController():
     # LTA mode. Set ret.steerControlType = car.CarParams.SteerControlType.angle and whitelist 0x191 in the panda
     if frame % 2 == 0:
       can_sends.append(create_steer_command(self.packer, 0, 0, frame // 2))
-      can_sends.append(create_lta_steer_command(self.packer, actuators.steeringAngleDeg, CS.out.steeringTorque, apply_steer_req, frame // 2))
+      can_sends.append(create_lta_steer_command(self.packer, actuators.steeringAngleDeg, CS.out.steeringAngleDeg, CS.out.steeringTorque, apply_steer_req, frame // 2))
 
     # we can spam can to cancel the system even if we are using lat only control
     if (frame % 3 == 0 and CS.CP.openpilotLongitudinalControl) or pcm_cancel_cmd:
diff --git a/selfdrive/car/toyota/toyotacan.py b/selfdrive/car/toyota/toyotacan.py
index 45f1264785..3d3a23ae12 100644
--- a/selfdrive/car/toyota/toyotacan.py
+++ b/selfdrive/car/toyota/toyotacan.py
@@ -12,18 +12,20 @@ def create_steer_command(packer, steer, steer_req, raw_cnt):
   return packer.make_can_msg("STEERING_LKA", 0, values)
 
 
-def create_lta_steer_command(packer, steer, driver_torque, steer_req, raw_cnt):
+def create_lta_steer_command(packer, apply_steer, steer_angle, driver_torque, steer_req, raw_cnt):
   """Creates a CAN message for the Toyota LTA Steer Command."""
 
-  percentage = interp(abs(driver_torque), [40, 100], [100, 0])
+  # PERCENTAGE is correlated with driver torque
+  percentage = interp(abs(driver_torque), [30, 100], [100, 0])
+  apply_steer = interp(percentage, [0, 100], [steer_angle, apply_steer])
   values = {
     "COUNTER": raw_cnt + 128,
     "SETME_X1": 1,
     "SETME_X3": 3,
     "PERCENTAGE": percentage,
     "SETME_X64": 0x64,
-    "ANGLE": steer,  # Rate limit? Lower values seeem to work better, but needs more testing
-    "STEER_ANGLE_CMD": steer,
+    "ANGLE": apply_steer * 1.5,  # TODO: need to understand this better, it's always 1.5-2x higher than angle cmd
+    "STEER_ANGLE_CMD": apply_steer,
     "STEER_REQUEST": steer_req,
     "STEER_REQUEST_2": steer_req,
     "BIT": 0,