* horribly messy
* bit simpler
* is this right?
* simpler and should work?
* used to be int/frames, but added easing so treat as float
* end slow (start fast)
* little faster
* clean up
* not needed
* try ease in/ease out and fix
* remove debugging print
* fix
* revert to previous curve
* based on speed
* not right
* fix
* fix
* this kinda works
* Revert zoom by speed
Revert "this kinda works"
This reverts commit 48aa30b945148b8eb79fbe33eb58e3fc3a6a7009.
Revert "fix"
This reverts commit 4ff2d33486231727d7cd68d366342c2273e3a315.
Revert "fix"
This reverts commit 15b22f8e8284eb017000856abb05b5e8973a6c0e.
Revert "not right"
This reverts commit 378b9965e14250c57ed39e1976de60d89054c2c8.
Revert "based on speed"
This reverts commit 1f7bfa5d73a2dee3740096da64eda24b33288b51.
Revert "Revert "not right""
This reverts commit 1beeb402534a755208d19771eb4a2afdc69b8739.
* better curve
* revert
* use constants and fixes
* up here too
* feels more intuitive to make zoom_transition=1 be zoomed in
* rm line
* fix
* cmt
* better handling
* better name
* zoom if ANY other stream is requested
* Update selfdrive/ui/qt/widgets/cameraview.cc
old-commit-hash: 26064196d0
This doesn't change anything in practice, but makes it harder to write a bug where a kwarg with the name `event` would overwrite the event name.
old-commit-hash: 309126a527
* rename from ignition to onroad/offroad
* forgot one
* clear in manager
* don't clear in boardd anymore
fix
* params isn't used here
* add comment
* Revert "add comment"
This reverts commit 54fb666050.
* write params in manager
* first part is self explanatory
* remove these from thermald now
* start safety setter thread with IsOnroad
* drivesss
* more
* less
* come back
* makes sense here
old-commit-hash: b8fa7f58ea
* delete files that are not defined in the keys
* assert after create file
* remove util::remove_files_in_dir
* cleanup
* fix up test
---------
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 10a1b8b7b1
* tizi: affine IRQ by action instead of number
* do camera irqs
* debug script
---------
Co-authored-by: Comma Device <device@comma.ai>
old-commit-hash: 038d34aa7f
* indecisive
* rename to generic FW query
* remove code and update comment
* we need this to start off, unless we set multiplexing immediately
* draft
* draft 2
* try that
* can't do this either, boardd might read Enabled after removing, but before setting new Request param
* this should work
* use one less param
* fix params
* match behavior (set all pandas to safety param of 1, disabling multiplexing for fingerprinting
* clean up (some tests may temp break)
* fix param name and sort
* time it
* yes it does matter
* add to hyundai's bus 5 query
* remove hyundai for now
* this should work
* clean up
* clean up
* flip argument around, clean up
* fix test_startup
* some clean up
* rm line
* comment makes more sense
* required typing
* clean up common type
* comments
* Update selfdrive/car/car_helpers.py
* line
* whoops, need to set before vin!
* fix debug
* annoying
* more debugging
* bug fix (needs both keys always)
* debuGG
debuGG
* Revert "debuGG"
This reverts commit 55b2f42932.
* Revert "more debugging"
This reverts commit 02934c3403.
* Revert "annoying"
This reverts commit 8b4e5e0998.
* clean that up
* bumpback
* bumpback
* every second write param
* flip
* stuff
* move up?
* fix timing out in CI
* rm
old-commit-hash: 42449b482d
* add flag
* actually use in fw_versions.py
* simpler
* not here
* Comment
* better name
* add param and block
* keys
keys
* block
* with a value
with a value
* add query for bosch PT bus
* different name
* fix
* .
* fix test
fix test
* add cloulogs
* mark as logging
old-commit-hash: c4b84783a0
* UI: show experimental long available to release users
* more description
* cleanup
* hide toggle
* fix process replay
* clear param
* actually fix
old-commit-hash: c408b7e306
* show confirmation toggle on first toggle of experimental mode
* don't store confirmation if users toggle off *after* this PR
* refactor
* cleaner
* not true
* try here
old-commit-hash: 2ad9a4f95a
* add mypy config matching precommit
* use local mypy, add files to config
* excludes too
* fix config
* pylint is sad now... did it get updated?
* fix typing hints
* ignore
* this should be a regexp
* mypy doesn't like Deque despite inheriting MutableSequence
* more excludes
* Revert "pylint is sad now... did it get updated?"
This reverts commit 250c632f18.
old-commit-hash: 4e310b807f
* wip torqued
* add basic logic
* setup in manager
* check sanity and publish msg
* add first order filter to outputs
* wire up controlsd, and update gains
* rename intercept to offset
* add cloudlog, live values are not updated
* fix bugs, do not reset points for now
* fix crashes
* rename to main
* fix bugs, works offline
* fix float in cereal bug
* add latacc filter
* randomly choose points, approx for iid
* add variable decay
* local param to capnp instead of dict
* verify works in replay
* use torqued output in controlsd
* use in controlsd; use points from past routes
* controlsd bugfix
* filter before updating gains, needs to be replaced
* save all points to ensure smooth transition across routes, revert friction factor to 1.5
* add filters to prevent noisy low-speed data points; improve fit sanity
* add engaged buffer
* revert lat_acc thresh
* use paramsd realtime process config
* make latacc-to-torque generic, and overrideable
* move freq to 4Hz, avoid storing in np.array, don't publish points in the message
* float instead of np
* remove constant while storing pts
* rename slope, offset to lat_accet_factor, offset
* resolve issues
* use camelcase in all capnp params
* use camelcase everywhere
* reduce latacc threshold or sanity, add car_sane todo, save points properly
* add and check tag
* write param to disk at end of route
* remove args
* rebase op, cereal
* save on exit
* restore default handler
* cpu usage check
* add to process replay
* handle reset better, reduce unnecessary computation
* always publish raw values - useful for debug
* regen routes
* update refs
* checks on cache restore
* check tuning vals too
* clean that up
* reduce cpu usage
* reduce cpu usage by 75%
* cleanup
* optimize further
* handle reset condition better, don't put points in init, use only in corolla
* bump cereal after rebasing
* update refs
* Update common/params.cc
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* remove unnecessary checks
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 4fa62f1464
* good updater experience
* set params on startup
* no fetch on first loop
* little type hinting
* little more
* update translations
* always set params with valid overlay
* wrap check
* use the param
* more wrapping
* vanish
* cleanup
* remove that
old-commit-hash: c4e63d14ab
* change LSM6DS3TR(-c) gyroscope and accelerometer to interrupt
* add pthread for linking
* add interrupt collector thread to fetch in parallel to non interrupt based sensors
* change get_event interface to return true on successful read
* fetch sensor interrupts via gpiochip
* avoid sending empty messages (interrupt only, non interupt magn can leave a gap in the orphan block)
* add verifier script to sensor interrupts (sensor_data_to_hist.py)
* add/update sensord testsweet (test_sensord.py)
* add poll timed out check
* unexport interrupt gpio pins
* gpiochip on both edges, but skip falling edge if rising edge is detected, this is handled in the sensor as the status flag is checked if new data is availble
* add test to sensord to verify 100Hz interrupt frequency
* add sensor shutdown/low power mode functionality on sensord exit
* relax test, will be readded in the splitup PR
Co-authored-by: Kurt Nistelberger <kurt.nistelberger@gmail.com>
old-commit-hash: 84a3c355e5
* single longitudinal toggle for e2e and disable radar
* write disable radar param
* rename
* better param name
* clean that up
* update refs
* update translations
* not live for experimental
* write it out
* vanish
old-commit-hash: 655a64b603
* compiling, won't work yet
* running with inputs and outputs
* there's some magic chance this works
* no more dlc, include onnx
* yolo tests plz
* bump tinygrad
* files_common + delete dlc
* tinygrad_repo -> tinygrad
* pre commit config
* llops needed
* extra in files_common
* bump tinygrad
* fix indent
* tinygrad/nn/__init__
* tinygrad_repo
* bump tinygrad repo
* bump tinygrad
* bump with native_exp, match maybe
* native_explog is argument
* pyopencl no cache
* 5% chance this matches
* work in float32?
* bump tinygrad
* fix build
* no __init__
* fix recip
* dumb hack
* adding thneed PC support
* fix pc segfault
* pc thneed is working
* to_image
* prints stuff with debug=2
* it sort of works
* copy host ptr is simpler
* bug fix
* build on c3
* this correct?
* reenable float16
* fix private, fixup copy_inputs internal
* bump tinygrad and update ref commit
* fix OPTWG on PC
* maybe fix non determinism
* revert model replay ref commit
* comments, init zeroed out buffers
* upd ref commit
* bump tinygrad to fix initial image
* try this ref
Co-authored-by: Comma Device <device@comma.ai>
old-commit-hash: 40d6f4b65c
Dean Lee
Shane Smiskol
Harald Schäfer
Cameron Clough
Kacper Rączy
Adeeb Shihadeh
ntegan1
Kurt Nistelberger
martinl
Willem Melching
Lee Jong Mun
Vivek Aithal
George Hotz
ZwX1616