* ev has different scales
* fix initial gradient
* fix highlight weirdness
* try smooth set of gains
* delay
* add gain idx
* oops
* set different min dc
Co-authored-by: Comma Device <device@comma.ai>
old-commit-hash: c7a0f23b45
* Change ramp limits to 2/2 for CANFD cars
* Only the high torque CANFD cars
* comment
* Update selfdrive/car/hyundai/values.py
* Better to do 2/3 and for all cars
* bump to master
* update refs
old-commit-hash: d57e07eec0
* stop sensord if interrupts not enabled
* move to tearDown
Co-authored-by: Kurt Nistelberger <kurt.nistelberger@gmail.com>
old-commit-hash: 03314b3ddf
* Honda Bosch: match speed on dash
* present on all cars
* all honda
* more explicit switching
* hyst
* hyst
* clean up
* Update ref_commit
* no bitwise
no bitwise
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: e699b0994c
* camerad: log image sensor in camera states
* for all cams
* bump cereal
* revert that
Co-authored-by: Comma Device <device@comma.ai>
old-commit-hash: 7352e6d940
* toyota: match set speed from dash
* Use unit bit
* Use RSA2
* flip this
* Universal unit signal, set vEgoCluster
* remove this and bump opendbc
* detect if car interface sets cluster fields
* revert
* needs to be cp
* UI_SPEED is actually always in kph?
* forgot to actually convert it
* same in onroad
* try conv factor only for imperial
* Seems like UI_SPEED is not the UI speed at all
* the dash might floor it
* same openpilot behavior
* bump
* ego speed factor is dynamic across speeds, handle Lexus exceptions with
diff msg
* remove test, bump opendbc
* secret formula
* secret formula v2
* 1.03 is sufficient
* try short press
* bump opendbc
* surely this can be cleaned up
surely this can be cleaned up
* use filter
* redo factors
* try UI_SPEED again with a factor
try UI_SPEED again with a factor
* dash applies hysteresis to speed. this matches pretty well, but not exactly
* make hysteresis generic
* clean up
* revert this
* try this
* read from fake params
* should be mostly good for imperial now
* revert
* revert
* remove toyota stuff
* common function for everyone
* rm line
* fix
* an example with Toyota
* use CS.out
* one mph
* 1 kph
* cmt
* remove cmt
* abs it
Co-authored-by: Willem Melching <willem.melching@gmail.com>
old-commit-hash: ef26abcf65
* lateral overriding is overriding
* Update test
* remove
* also could do something like this and only have one OVERRIDE ET
* Revert "also could do something like this and only have one OVERRIDE ET"
This reverts commit 5c381641c0.
* full names
* bump cereal
* test every event type
* update refs
old-commit-hash: 992707c172
* multilang date
* update translations
* add language to uistate
* update translations
* use it here too
Co-authored-by: sshane <shane@smiskol.com>
old-commit-hash: 27e1ec8fd3
* change LSM6DS3TR(-c) gyroscope and accelerometer to interrupt
* add pthread for linking
* add interrupt collector thread to fetch in parallel to non interrupt based sensors
* change get_event interface to return true on successful read
* fetch sensor interrupts via gpiochip
* avoid sending empty messages (interrupt only, non interupt magn can leave a gap in the orphan block)
* add verifier script to sensor interrupts (sensor_data_to_hist.py)
* add/update sensord testsweet (test_sensord.py)
* add poll timed out check
* unexport interrupt gpio pins
* gpiochip on both edges, but skip falling edge if rising edge is detected, this is handled in the sensor as the status flag is checked if new data is availble
* add test to sensord to verify 100Hz interrupt frequency
* add sensor shutdown/low power mode functionality on sensord exit
* relax test, will be readded in the splitup PR
Co-authored-by: Kurt Nistelberger <kurt.nistelberger@gmail.com>
old-commit-hash: 84a3c355e5
* add missing ascent fw version
Ascent had recall service for transmission ecu. New values added.
* Update selfdrive/car/subaru/values.py
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 56b05d55eb
* Toyota: clean up long tunes a bit
* Update selfdrive/car/toyota/interface.py
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 2704e2cf4d
* start porting OS04C10
* something
* is the pll why this doesn't work
* understand plls, still doesn't work
* work
* weee something
* working?
* timing
* encoderd works with less cameras
* 1928
* flip image
* color balance
* adjust black level
* extra height maybe
* cleanups
* clean up sensor i2c
* sensors
* approx 20fps
* remove mirror
* 50ms, no fsin yet
* remove imx390 support
* some attempt at AE
* linearize the response
* OX changes (#25697)
* organize
* wb
* best effort but probably messed up by artifacts
* multicam sync
Co-authored-by: Comma Device <device@comma.ai>
* clean up
* more
* fix multiexposure
* start porting OS04C10
* something
* is the pll why this doesn't work
* understand plls, still doesn't work
* work
* weee something
* working?
* timing
* encoderd works with less cameras
* 1928
* flip image
* color balance
* adjust black level
* extra height maybe
* cleanups
* clean up sensor i2c
* sensors
* approx 20fps
* remove mirror
* 50ms, no fsin yet
* remove imx390 support
* some attempt at AE
* linearize the response
* OX changes (#25697)
* organize
* wb
* best effort but probably messed up by artifacts
* multicam sync
Co-authored-by: Comma Device <device@comma.ai>
* clean up
* more
* fix multiexposure
* unbroken AE
* oops
* sort of good AE
* both should work 1
* open then init
* fix debayer
* rename
* fix test build
Co-authored-by: Comma Device <device@comma.ai>
Co-authored-by: ZwX1616 <zwx1616@gmail.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: aea1a0d5e6
* Add VMCU address for EV6
* Rename vmcu
* add to tests
add to tests
* rename to more generic name
* more explicit
* remove print
* Like this much better, removes subtle fingerprinting problems
* clean up
* add test and clean up
* remove hyundai stuffs
* global
* Fpv2Config class
* fix missing fw versions from import order
* unused
* revert for now
* test for fpv2 configs with subtests
* subtests don't work that way
* do toyota as an example
* revert
revert
* do chrysler
* do rest
* stash
* much smaller of a diff than the alternative
* remove unused test
* fix tests
* remove brand from Request
* Make StandardQueries class
* add missing_ecus
clean up
* rename file
* unused
* test implemented
* add comment and rename
add comment and rename
add comment and rename
* should be impossible now
* this is a fixme
* rename to fw_query
* rename this too
* and this
* move vin queries to class
* order
* can use p16!
* formatting
* whoops, this wasn't gated on not len(found_versions)
* make this clear
* Standardize manufacturer software version query
old-commit-hash: 0ef6bb48df
* Added support for APA racks
APA steering racks use a different bit to represent whether the ECU should enable steering assist.
This change supports those APA steering racks.
* Static analysis fix
* Static analysis fix2
* Code cleanup
* Update selfdrive/debug/vw_mqb_config.py
* Apply suggestions from code review
Co-authored-by: Jason Young <46612682+jyoung8607@users.noreply.github.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: Jason Young <46612682+jyoung8607@users.noreply.github.com>
old-commit-hash: fc3bdef891
ZwX1616
Adeeb Shihadeh
Shane Smiskol
Kurt Nistelberger
Jason Young
Willem Melching
Dean Lee
Robbe Derks
Kurt Nistelberger
Julian Pieles
Brandon Bennett
Erich Moraga
Igor Biletskyy
ambientocclusion
cydia2020
Jeroen
George Hotz
calledit
Ochi Yuma
Cameron Clough