* can I kick it?
* bumpity bump bump
* bump panda
* everybody's gotta be special
* attempt at improving stopping/starting
* reduce lateral feedforward
* tweak gradient and comfort bands
* oops
* accel from the dept of redundancy dept
* bump opendbc
* jerk limiter not needed and causing problems
* don't leave stop/start flags hung when not enabled
* reduce comfort band with lead car
* borrow decel comp from HKG
* align stopping state thresholds
* (re)try letting PI clean up some of this
* bump panda
* tweaks and comments
* elide superfluous import
* VW MQB: Longitudinal prereqs
* gate this too
* bump CI
* cleanup
* more cleanup; require gateway integration
* don't run long state/actuators unless sending message
* setpoint visibility in instrument cluster
* show fixed lead car if lead visible
* hold my beer?
* tuning
* the code is darkest before the refactor
* a little more
* set freewheel and stop distance correctly
* rounding issue maybe?
* ACC_04 Charisma profiles and HUD alerts
* fix ACC_04 counter, fix gradient and accel bugs
* revert tuning change in upstream focused branch
* need 0.5m/s to leave
* reduced braking when not absolutely needed
* oops
* bump panda
* match opendbc to master
* filter ACC_13, disable secondary accel
* bump panda
* bump panda
* bump opendbc and panda
* startAccel is deprecated
* testing manual trans min engage speeds
* pass stock ACC type to TSK
* bump panda
* bump opendbc
* bump opendbc
* test hax for Brake alert
* remove ACC_13 with matching panda bump
* fix submodule refs
* update long control safety param name
* bump panda
* actuator delay corrected by Mk1 eyeball
* a little more
* tweak stop/start thresholds
* Revert "tweak stop/start thresholds"
This reverts commit 60abd57d20.
* more lag reduction
* bump opendbc
* support both analog and digital clusters
* tuning adjustments
* bump opendbc and panda
* accept two button types for resume
* support separate set and resume
* bump panda
* #24706
* partial revert 6b93ac27
* fixes
* one more
* refactor all the things
* follow experimental long refactor
* fill in ACC hud status
* temp force E2E availability
* start cleaning up
* comment touchup
* gimme some comfort baby
* experiment
* SnG me maybe?
* a little more rollout
* is this why I'm not leaving?
* turns out you need startAccel to leave
* try without ACC_04
* cleanup unused variables
* temp hack to standstill handling
* temp hack to button handling
* trim rollout distance with slower vEgoStopping
* ultra fat comfort band due to noisy E2E actuator
* I like big changes and I cannot lie
* remove lead car display for now
* cleanup, drives somewhat better
* partial FtS/basic support
* diff reduction
* not needed
* more cleanup
* oops
* more cleanup
* restore lead car visible for PQ
* bump panda
* better enable button solution
* redundant
* OP long on *all* the things
* OP long on all the things *sometimes*
* docs generator a little TOO clever
* solve starting-state a different way
* try that again
* bump panda
* oops
* follow DBC refactor
* retry CI
* signal name changed
* sync with custom enable button branch
* oops
* more follow refactor
* bump panda
* sync opendbc to master
* bump panda
* updated comments
* light P, no I
* bump panda
* bump panda again
* add openpilot long test_models route
* bump panda with replay route
* temporarily disable experimental long for merge
* bump panda to master
* resolve conflict?
* now can we go to head?
* explicit length check
* update refs
Co-authored-by: Comma Device <device@comma.ai>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: b31b031044
* Add VMCU address for EV6
* Rename vmcu
* add to tests
add to tests
* rename to more generic name
* more explicit
* remove print
* Like this much better, removes subtle fingerprinting problems
* clean up
* add test and clean up
* remove hyundai stuffs
* global
* Fpv2Config class
* fix missing fw versions from import order
* unused
* revert for now
* test for fpv2 configs with subtests
* subtests don't work that way
* do toyota as an example
* revert
revert
* do chrysler
* do rest
* stash
* much smaller of a diff than the alternative
* remove unused test
* fix tests
* remove brand from Request
* Make StandardQueries class
* add missing_ecus
clean up
* rename file
* unused
* test implemented
* add comment and rename
add comment and rename
add comment and rename
* should be impossible now
* this is a fixme
* rename to fw_query
* rename this too
* and this
* move vin queries to class
* order
* can use p16!
* formatting
* whoops, this wasn't gated on not len(found_versions)
* make this clear
* Standardize manufacturer software version query
old-commit-hash: 0ef6bb48df
* single longitudinal toggle for e2e and disable radar
* write disable radar param
* rename
* better param name
* clean that up
* update refs
* update translations
* not live for experimental
* write it out
* vanish
old-commit-hash: 655a64b603
* Move auto resume in sng to car interface
* Update docs
* shorter name, star
* order
* resumes?
* add hidden detail sentence
* good to know this works, but revert
* VW auto resume
* bump cereal to master
* Update ref_commit
* match cereal
* try this
* ?
?
* like this
old-commit-hash: 452d5e42ec
* VW PQ: Volkswagen Passat NMS
* regen CARS.md
* vEgo from Bremse_1 vehicle speed
* sync opendbc to master
* handle checksums and counters in opendbc
* LDW HUD message handling
* GRA_Neu_Zaehler -> COUNTER
* bump opendbc
* stub in till we find platform ACC standstill
* bump opendbc
* bump opendbc
* placeholder lateral accel data
* regen CARS.md
* counters now directly supported in opendbc
* additional door-open signals
* add trunk lid state
* add doors and trunk lid to signals list
* LDW_Status updates and passthrough
* bump opendbc for typo fix
* update AWV comment
* another comment update
* regen CARS.md with PQ in dashcam only
* don't show NMS footnotes while still in dashcam
* polish
* add stubbed-out dashcamOnly prep
* VW MQB: Cleanup stock ACC button handling
* bump opendbc and panda
* use controls resume output as trigger
* these can wait until taco bell
* bump opendbc
* pass through of previously fixed value
* retry CI
* checks already done in carcontroller
* don't need these anymore
* reduce diff for now
* slightly better abstraction
* more engine and trans FW
* turn signal is instantaneous stalk position
* weak sauce :(
* better clarity
* try torque tune
* add test route references
* bump opendbc and panda for OP long
* don't show steering faults for 3 seconds after start
* longitudinal control senders
* a little more torque
* test hax to torque control
* test a little more delay
* allow use of manufacturer ramp-up rate
* soften wheel-touch threshold
* Revert "test hax to torque control"
This reverts commit d1af459c29.
* punch it Chewie
* better ACC state and mainswitch handling
* a little more
* tweak max accel gradient
* oops
* also oops
* stuff
* srsly
* that's not how this works
* regen CARS.md
* footnotes now properly excluded for dashcam cars
* this wasn't a problem
* update network location detection
* bump submodules for ACC main switch
* clean up DBC references and long flag
* bump one more time
* one more time
* follow CANPacker counter refactor
* bump opendbc
* sync opendbc to master
* bump panda to fix Subaru tests
* DBC handling cleanup
* fix
* model-year stretch
* cleanup and rate bugfixes
* better abstractions
* simplify create_lka_hud_control
* volkswagencan -> mqbcan
* bump panda
* fix doc data bug, regen CARS.md
* style updates; diff reduction
* use common button enable logic
* not needed anymore
* refactor TSK and HUD enum values
* make common button events function
* consistency
* bump panda
* bump panda
* dashcam only
* don't need process_replay yet
* regen CARS.md with Passat NMS in dashcam
* can't handle dashcam-orphaned footnotes yet
* remove outdated standstill handling
* editor tried to be too helpful at some point
* don't need to import this anymore
* Apply suggestions from code review
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* follow parkingBrake refactor
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: c27d7913f2
* Add missing AUDI_A3_MK3 trans & SRS f/w + cleanup
@Lord_Veit#2600 Audi A3 E-Tron (EU) DongleID/route 7a66a72837a92935|2022-08-01--20-08-22
https://discord.com/channels/469524606043160576/524592892627517450/1003759334796316752
Cleanup was simply replacing `\0` w/ `\x`... a problem I noticed while adding missing firmware.
* Add missing AUDI_A3_MK3 trans & SRS f/w
Reverted previous "cleanup"... which was actually more of a disaster.
old-commit-hash: 7547d887e0
* VW MQB: Cleanup stock ACC button handling
* use controls resume output as trigger
* these can wait until taco bell
* pass through of previously fixed value
* retry CI
* checks already done in carcontroller
* don't need these anymore
* reduce diff for now
* remove parenthesis
* update refs
* fix packer exception
* update refs
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 0574b8504f
* hyundai dump
* dump
* optima (good, it doesn't get rid of previous segment values)
* add these comments back for now
* add another from release3 today
old-commit-hash: 444de299b6
* always log leads, we hide them in ui
* only spam resume when future is > vEgoStarting
* do rest but vw
* vw
* remove comments
* rename to resume
* maintain original button msg rate
* mazda: ensure no resume if cancelling
* same for non-HDA2
* Always run planner if not opLong
* try 0.2
* 0.1 should be pretty safe
* add test for resuming
* fix test
* stricter test, speeds[-1] is 0.14 when starting here
* no walrus
* fixup mazda cc
* remove extra import
old-commit-hash: fd2de54172
* json
* better naem
* Read from table
* formatting and default to nan
* Generate docs
* Read from table
* this should be the same
* Prius v is full
* test we always set the tunes correctly
add to release files
* Set for all cars
Set for all cars
* Revert tuning changes
Revert tuning changes
* remove that
* fixes
* update ref commit for new maxLateralAccels
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 3066ad81a8
* Set good torque using torque controller tuning
* should be equal to
* save lateral accel to car params
* use maxLateralAccel
* always
* same convention
* nan will always evaluate to false
* The great good torque purge
* adjust default friction
* Add data for more cars
* adjust name
* Welcome back, guys. Only adjust good torque if maxLatAccel is set
* Update refs (1.7 is 1.7000001...)
old-commit-hash: c6bc03311c
* add mypy check for return-any
* remove unused import
* typing
* remove unnecessary variable typing
* cleanup
* cleanup
* bump submodules
* small fixes
* only a problem on mac
Co-authored-by: Willem Melching <willem.melching@gmail.com>
old-commit-hash: d2eef1955c
* Add harness information
* test harness enum
* add harness info for tucson
* update Tucson harness
* get rid of development
* make global enum
* fix
* add harness info
* add harness info to CARS.md (since we need multiple lines per HKG platform)
* revert this
* Actively Maintained means something! (aka, to bronze with select VW)
* fix caravelle
* add harness tooltip on maintained column
fix
* lol tubaru
* always assume harness
* update honda harnesses
* add Ioniq hybrid 2017-19 harness, todo: not sure
* unused import
* hmm, did they really switch to the C for 1 year??
* add comment
* add comments
* adding tooltips should be fine
* fix santa fe harness
* welcome back, vw
* no need for two harness strings
* seems fine
* fix 19-20 Niro EV harness
* these were taking from old database, so assume correct
* could be d
* pass all car info into template
* no more tool tips
* these use j533 harnesses
* accidentally got removed in merge
* also merge issue
* don't need these
* make harness non-optional
old-commit-hash: 433fcc0c71
Jason Young
Shane Smiskol
Adeeb Shihadeh
ogiechogie
salsashark37
John Belmonte
Erich Moraga
HaraldSchafer
Dylan Herman