* honda_idlestop_timer
* whoops
* simplify
* just use stopping counter and move bosch radarless specific logic into the function
* it's actually 4 seconds
* Update selfdrive/car/honda/hondacan.py
* check equal to 0
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* add erf based ff
* silly bug; diff of nonlinear != nonlinear of diff
* add sigmoid based ff, ensure slope at 0 > 1
* reduce steer down limit and increase driver allowance
* rebase panda
* atry without friction, and with tanh nonlinear
* finalize the nonlinear function
* do not disable friction compensation in the ff
* bump panda
* bump panda
* update refs
* update refs
* resolve comments
* Add type hints
---------
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* civic22_long
* Stock requests -4
* add standstill bit
* bump
* fix standstill
* bump
* bump
* bump panda
* Update hondacan.py
* bump panda
* add docs
* bump panda
* bump panda
* fix control_on value
* set control_off
* fix cars.md
* Update panda
* Update opendbc
* Update panda
* Update panda
* allow more braking
* Revert "allow more braking"
This reverts commit ecd2493a43.
* Update panda
* fix speed mismatch
* Revert "fix speed mismatch"
This reverts commit ca795dc5bd.
* Update panda
* fix speed mismatch and standstill
* delay stopped message to match stock behavior
* green cruise only when enabled
* Update panda
* Revert "green cruise only when enabled"
This reverts commit d21aa5b541.
* lesser nester
* simplify
* simplify control_on
* simplify common signals
* simplify CONTROL_ON
* lessest nester
* hide speed on gas_override to match stock behavior
* tiny simplification, lesser nester
* flip common acc control values around
* move magic number to global variable
* Revert "move magic number to global variable"
This reverts commit 160be0e087.
* remove stopped logic
* remove unused variable
* looks ok
* looks better
* simplify override
* clarify CONTROL_OFF signal comment
* civic22_long_bettercontroloff
shorten delay
init
selfless
whoops
move to carcontroller
selfmore
lower time, currently take 5s to kick in
just right
deline
* Rename CONTROL_OFF -> IDLESTOP_ALLOW
This tells the car its ready to turn off the engine, which does so when the car is standstill.
* Update panda
* Update opendbc
* Update panda
* fix docs
* Update panda
* Update panda
* Update opendbc
* Update panda
* Update panda
* Update panda
* Update panda
* bump panda
* idlestop in another PR
* radarless doesn't need tester present
* simplify that
* helper
* one line is fine
* test bump
* bumpback
* disallow
* reduce diff
---------
Co-authored-by: sshane <shane@smiskol.com>
* query extra ecus (still need to match)
* match against extra ecus
* clean p
* clean p
* switch that around
* can clean that up
* values
* rm
* not used
* add parking and hvac ecus
* needs a new query sadly
* move space
* temp
* comment
* fix
* mid-solution stash
* pretty cleannnnnnn
* everything seems to be working
* bump cereal
* bump to master
* bump to master
* don't multiplex when we don't need it
* mid-solution stash
* pretty cleannnnnnn
* everything seems to be working
* rename
* space
* reduce obd multiplexing transitions from 3 to 1 (0.3s to 0.1s)
* add parking and hvac ecus
* needs a new query sadly
* move space
* temp
* comment
* fix
* mid-solution stash
* pretty cleannnnnnn
* everything seems to be working
* bump cereal
* this is a smaller diff, easier to merge
* bump cereal
* just hvac
* bump to master
* indecisive
* rename to generic FW query
* remove code and update comment
* we need this to start off, unless we set multiplexing immediately
* draft
* draft 2
* try that
* can't do this either, boardd might read Enabled after removing, but before setting new Request param
* this should work
* use one less param
* fix params
* match behavior (set all pandas to safety param of 1, disabling multiplexing for fingerprinting
* clean up (some tests may temp break)
* fix param name and sort
* time it
* yes it does matter
* add to hyundai's bus 5 query
* remove hyundai for now
* this should work
* clean up
* clean up
* flip argument around, clean up
* fix test_startup
* some clean up
* rm line
* comment makes more sense
* required typing
* clean up common type
* comments
* Update selfdrive/car/car_helpers.py
* line
* whoops, need to set before vin!
* fix debug
* annoying
* more debugging
* bug fix (needs both keys always)
* debuGG
debuGG
* Revert "debuGG"
This reverts commit 55b2f42932.
* Revert "more debugging"
This reverts commit 02934c3403.
* Revert "annoying"
This reverts commit 8b4e5e0998.
* clean that up
* bumpback
* bumpback
* every second write param
* flip
* stuff
* move up?
* fix timing out in CI
* rm
* test out lta message
* correctly send
* percentage is percentage driver isn't overriding
* closer to stock system
* should be able to send LTA at 100hz, counter is the same as LKA
* small amount of torque towards desired
* Offset commanded torque correctly
* Too little torque
* use car's SETME's
* Revert "use car's SETME's"
This reverts commit c888569699.
* try cutting steer every second
* Didn't seem to matter
This reverts commit 6923498b2a.
* steer to 0
* let packer set counter
* add for camry
* log steer faults
* comments
* bump opendbc
* add opParams
* add lta safety
* set safety param
* fix torque control bug
* bump panda
* fix missing signal
* [experiment] apply some rate limiting and anti-windup
* no faults, clip to 90 deg, decent torque blending
* clean up blending
* toyota angle rate limits
* use std angle limits
* assert we only add angle control to TSS2 cars
* clean up carcontroller a bit
* space space
* bump opendbc
* clean up toyotacan from opendbc change
* bump panda
* will tests run?
* steer at zero
* refactor angle to use LatControlPID with zero gains
* stop some faults and tuning
* possibly fix integral wind up at max torque
* Add 2023 rav4
* limit torque inside EPS when overriding (no huge windup in edge cases when overriding)
* fix wind up issue after turns (or prolonged saturation)
* this doesn't work that well
* try these limits
* try this
* log the angle!
* global variable
* Apply suggestions from code review
* clip angle to 3 m/s/s
* some tolerance for roll
* raise limits a bit
* bumppanda
* fix faults
* still not good
* offsetting causing hugging?
* Revert "offsetting causing hugging?"
This reverts commit a42ec0b772.
* reduce kp
* class var not needed
* limit up angle delta
* fix saturation check
* feedforward includes offset
* some threshold for roll
* bump panda
* surely we don't need this
* test stuff
* Toyota: Add FW for 2023 RAV4 Hybrid (#27494)
* Toyota: Add FW for 2023 RAV4 Hybrid
* Set RAVH_TSS2_2022 to use angle SteerControlType
* bump panda
* remove extras
* Revert "remove extras"
This reverts commit 87378e7349.
* no max angle limit for now
* add as separate platforms
* remove debug scripts
* revert to master
* remove these FW versions from 2022
* dashcam these cars :(
* fix test
* interface
* add to untested routes
* never send torque with LTA cars
* fix values
* clean up controlsd
* reset lat control files
* use the car param
* add to params
* bump panda to master
* Update selfdrive/car/toyota/carcontroller.py
* don't set torque params if angle control (fixes controlsd bug)
* reset controlsd
* keyword
* in another pr
* simplify test
* rm line
* Update selfdrive/car/toyota/tests/test_toyota.py
---------
Co-authored-by: crispbee <84819466+crispbee@users.noreply.github.com>
@jyoung8607 I try to do this joy better
I setup my C3 on this car to get information to merge this FPV2
The route name is 0bbe367c98fa1538|2023-03-16--11-41-19--2
Co-authored-by: Shane Smiskol <shane@smiskol.com>
Erich Moraga
royjr
Vivek Aithal
Dean Lee
Shane Smiskol
erotisch
pugdaddys
Lee Jong Mun
realfast
cpaioletti
Luqi Pan
tonzy74
koch-cf
Kay Oh
Saber422
Oxygen
martinl
klaw73
freddiebd
kevinsdev