* note for dsu cars
* don't hardcode dsu footnote (1/2)
* test
* revert the experimental long toggle
* another day:(
* DSU doesn't have to be toyota specific, it's a generic carParam!
* this is safe, just make sure it's unknown
* these cars do not have OP long for some reason
* UNSUPPORTED_DSU_CAR
* forgot this
* fix autoResume
* fix autoResume 2
old-commit-hash: 3e69973819
* put gm camera voacc behind disable radar toggle
* bump panda
* bump panda
* bump panda
* experimental long
* fixes
* car control notes and fixes for Bolt EUV
* might enable stop and go
* consistent name
* min enable speed seems to be around 5 kph
* camera acc can engage under 5 kph if stopped
* comment
* comment
* remove this for now
* only real brake
* comments
* update max brake
* bump
* clean up/fix
* same if
* simplify
* fix
* old comment
* no brake_pressed
* temporary fault fix
* tune longitudinal
* update docs
* bump panda
* GM camera ACC cars have no regen in ACC
* cleaner
* cleaner
* fix
* set max gas
* fixes
* fix LKAS unavailable warning from camera
* only camera
* bump panda
* bump panda
* bump panda
* bump panda
* clean up gmcan
* clean up CC
* flip
* rm
* rm comment
* clean up
* custom starting/stopping probably not needed
* Update selfdrive/car/gm/carcontroller.py
* fix crash
* long tuning
* we need long control state to resume
* CAMERA_ACC_CAR not needed
* no interp on accel
* tuning
* formatting
* formatting
* formatting
* formatting
* formatting
* no need to init ccp
* makes more sense now
old-commit-hash: 2fb7b4ffad
* can I kick it?
* bumpity bump bump
* bump panda
* everybody's gotta be special
* attempt at improving stopping/starting
* reduce lateral feedforward
* tweak gradient and comfort bands
* oops
* accel from the dept of redundancy dept
* bump opendbc
* jerk limiter not needed and causing problems
* don't leave stop/start flags hung when not enabled
* reduce comfort band with lead car
* borrow decel comp from HKG
* align stopping state thresholds
* (re)try letting PI clean up some of this
* bump panda
* tweaks and comments
* elide superfluous import
* VW MQB: Longitudinal prereqs
* gate this too
* bump CI
* cleanup
* more cleanup; require gateway integration
* don't run long state/actuators unless sending message
* setpoint visibility in instrument cluster
* show fixed lead car if lead visible
* hold my beer?
* tuning
* the code is darkest before the refactor
* a little more
* set freewheel and stop distance correctly
* rounding issue maybe?
* ACC_04 Charisma profiles and HUD alerts
* fix ACC_04 counter, fix gradient and accel bugs
* revert tuning change in upstream focused branch
* need 0.5m/s to leave
* reduced braking when not absolutely needed
* oops
* bump panda
* match opendbc to master
* filter ACC_13, disable secondary accel
* bump panda
* bump panda
* bump opendbc and panda
* startAccel is deprecated
* testing manual trans min engage speeds
* pass stock ACC type to TSK
* bump panda
* bump opendbc
* bump opendbc
* test hax for Brake alert
* remove ACC_13 with matching panda bump
* fix submodule refs
* update long control safety param name
* bump panda
* actuator delay corrected by Mk1 eyeball
* a little more
* tweak stop/start thresholds
* Revert "tweak stop/start thresholds"
This reverts commit 60abd57d20.
* more lag reduction
* bump opendbc
* support both analog and digital clusters
* tuning adjustments
* bump opendbc and panda
* accept two button types for resume
* support separate set and resume
* bump panda
* #24706
* partial revert 6b93ac27
* fixes
* one more
* refactor all the things
* follow experimental long refactor
* fill in ACC hud status
* temp force E2E availability
* start cleaning up
* comment touchup
* gimme some comfort baby
* experiment
* SnG me maybe?
* a little more rollout
* is this why I'm not leaving?
* turns out you need startAccel to leave
* try without ACC_04
* cleanup unused variables
* temp hack to standstill handling
* temp hack to button handling
* trim rollout distance with slower vEgoStopping
* ultra fat comfort band due to noisy E2E actuator
* I like big changes and I cannot lie
* remove lead car display for now
* cleanup, drives somewhat better
* partial FtS/basic support
* diff reduction
* not needed
* more cleanup
* oops
* more cleanup
* restore lead car visible for PQ
* bump panda
* better enable button solution
* redundant
* OP long on *all* the things
* OP long on all the things *sometimes*
* docs generator a little TOO clever
* solve starting-state a different way
* try that again
* bump panda
* oops
* follow DBC refactor
* retry CI
* signal name changed
* sync with custom enable button branch
* oops
* more follow refactor
* bump panda
* sync opendbc to master
* bump panda
* updated comments
* light P, no I
* bump panda
* bump panda again
* add openpilot long test_models route
* bump panda with replay route
* temporarily disable experimental long for merge
* bump panda to master
* resolve conflict?
* now can we go to head?
* explicit length check
* update refs
Co-authored-by: Comma Device <device@comma.ai>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: b31b031044
* controlsd: steer in old preEnable state
* bump panda
* bump panda
* Update ref_commit
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 6698cd4829
* send at 10hz when inactive
* try to make it fine to switch rates
* fix rate
* todododo
* fine if we skip, we usually send too early
* clean up
* this may be required, 50Hz is not really needed to sync/initialize
* preserves previous behavior (not sure if this makes sense)
* Revert "preserves previous behavior (not sure if this makes sense)"
This reverts commit 3b297bca72.
* Revert "this may be required, 50Hz is not really needed to sync/initialize"
This reverts commit a6b4693814.
* rm com
* Update ref_commit
* gate behind GM Cam
* common logic
* bet
* update refs
old-commit-hash: 27e315e58f
* Use calibrator to stabilize wide transform
* Need array
* Needs init
* Needs to be arr
* publish mshg
* Check size
* Update ref
* fix calibration param read when no wide calib
* need self!
old-commit-hash: 15595fc859
* Use calibrator to stabilize wide transform
* Need array
* Needs init
* Bump to master
* Needs to be arr
* publish mshg
* Check size
* Update ref
old-commit-hash: 42ef62e391
* Hyundai: share panda flags with CAN-FD platform
* move that
* only set bit
* bump panda
* panda master
* regen + update refs for new param
old-commit-hash: c782380fc1
* Rewind to qcom time
* Fix test
* Typo
* init unix_time fix
* add gps sensor_time_offsets
* remove all clocks code and add todo
* :emove clocks in unit test
* update refs
* update refs
Co-authored-by: nuwandavek <vivekaithal44@gmail.com>
old-commit-hash: b332441803
* GM camera ACC: no faults on start up 2.0
And by 2.0 I mean we don't need to wait for blocked msg support to be merged first to merge this without regressing accidental single blocked msg count handling.
* Send the camera counter + 1
* Keep updating the first counter until we get a message on the bus
* Only update right before sending so sent_lka_steering_cmd is updated first
* Update ref_commit
old-commit-hash: 0f94d81b7a
* add override field to cruiseControl
* need to check if long *can* be active
* bump cereal to master
* revert
* better
* fix
* update refs
* rename variable
old-commit-hash: 7418678132
* Add explicit cost on steering wheel movement
* Laxer low speed control
* Laxer low speed control
* Lower min speed now there is a cost
* 3m/s
* Similar to old master
* Add cost
* Crazy high
* Update ref
* comment
old-commit-hash: 2c9b150761
* This brake position value disengages stock ACC, use it to avoid controls mismatch. 2016-2017 Volt will hit this threshold and disengage, must install new design of brake pedal retaining clip, TSB 16-NA-147.
* 80 hz
* comment
* bump panda
* update refs
* bump panda
* bump panda
* bump panda
* bump panda to master
Co-authored-by: qadmus <42746943+qadmus@users.noreply.github.com>
old-commit-hash: 6ce511cc60
* wip torqued
* add basic logic
* setup in manager
* check sanity and publish msg
* add first order filter to outputs
* wire up controlsd, and update gains
* rename intercept to offset
* add cloudlog, live values are not updated
* fix bugs, do not reset points for now
* fix crashes
* rename to main
* fix bugs, works offline
* fix float in cereal bug
* add latacc filter
* randomly choose points, approx for iid
* add variable decay
* local param to capnp instead of dict
* verify works in replay
* use torqued output in controlsd
* use in controlsd; use points from past routes
* controlsd bugfix
* filter before updating gains, needs to be replaced
* save all points to ensure smooth transition across routes, revert friction factor to 1.5
* add filters to prevent noisy low-speed data points; improve fit sanity
* add engaged buffer
* revert lat_acc thresh
* use paramsd realtime process config
* make latacc-to-torque generic, and overrideable
* move freq to 4Hz, avoid storing in np.array, don't publish points in the message
* float instead of np
* remove constant while storing pts
* rename slope, offset to lat_accet_factor, offset
* resolve issues
* use camelcase in all capnp params
* use camelcase everywhere
* reduce latacc threshold or sanity, add car_sane todo, save points properly
* add and check tag
* write param to disk at end of route
* remove args
* rebase op, cereal
* save on exit
* restore default handler
* cpu usage check
* add to process replay
* handle reset better, reduce unnecessary computation
* always publish raw values - useful for debug
* regen routes
* update refs
* checks on cache restore
* check tuning vals too
* clean that up
* reduce cpu usage
* reduce cpu usage by 75%
* cleanup
* optimize further
* handle reset condition better, don't put points in init, use only in corolla
* bump cereal after rebasing
* update refs
* Update common/params.cc
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* remove unnecessary checks
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 4fa62f1464
Shane Smiskol
Vivek Aithal
ZwX1616
Harald Schäfer
Kurt Nistelberger
Jason Young
Adeeb Shihadeh
Kurt Nistelberger