* Add trailblazer support
* Update routes.py
* Update routes.py
* Update CARS.md
* Fix incorrect torque name
* Update values.py and CARS.md
* Change to update another route
* update docs
* only 2021 https://en.wikipedia.org/wiki/Chevrolet_Trailblazer_(crossover)
only 2021
* new FP with missing addrs
* Update selfdrive/car/gm/interface.py
* tune the torque params
* update docs
* remove as a new platform
* Revert "remove as a new platform"
This reverts commit c9c65f29db.
* add comment and comment out FP
* need it to be in all_known_cars to test_model
* add to releases
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* add erf based ff
* silly bug; diff of nonlinear != nonlinear of diff
* add sigmoid based ff, ensure slope at 0 > 1
* reduce steer down limit and increase driver allowance
* rebase panda
* atry without friction, and with tanh nonlinear
* finalize the nonlinear function
* do not disable friction compensation in the ff
* bump panda
* bump panda
* update refs
* update refs
* resolve comments
* Add type hints
---------
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Add flashed Volt fingerprint
* Add another fingerprint
* Detect radar header message
* dashcamOnly if ASCM vehicle with radar unavailable
May be able to change this in the future to OP long off with experimental long available
* no submodule update
* Revert minEnableSpeed
* combine into one fingerprint
* Don't use GM radar DBC
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* unused
* add new FP
* update docs
* use_off_car_defaults
use_off_car_defaults
* update docs
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* draft
* bump opendbc
* still draft
* that's not right
* superset of the changes, 33hz
* cleanup
* this should work
* remove line
* pass it in again
* actually no need to check updated now
* now_nanos
* consistent name
* fix replay
* one line isn't that bad
switch
switch
* fix CarController tests
* Update ref_commit
* Reliable relay open
* Reliable relay close
* ign in a loop
* fixes
* we need this
* log
* comment to remind me tmrw
* ign fix
* this makes it 2x more reliable, but messyyy
* Revert "this makes it 2x more reliable, but messyyy"
This reverts commit 03401dc4a7.
* revert non-related stuff
* comments, spaces
* a stands for indefinite article
* not applicable for non-camera acc
* something...
* Revert "something..."
This reverts commit de8a158488.
* Update ref_commit
* stash
* more test
* less test
* clean test
* no angle
* add tolerance
* fix gm
fix gm
* test both
* lower some rates on hkg
* stash
* simpler
* bump panda
* Revert "bump panda"
This reverts commit f2137c2211.
* only torque
* make kona pass
* duplicate __init__
* move
* half clean up
* half clean up
* more clean up
* more clean up
* fix static analysis
* calculate over 0.5 seconds
* limit to max steer
* type annotation
* calc once
* add a hook function for makes to implement custom docs logic
* don't need this
* use the pre-defined list for honda's harnesses
* one line 😎
* Update selfdrive/car/docs_definitions.py
* i didn't know you didn't need a pass!
* don't change docs order
* add first draft enable button timeout
* use allow_enable
* it doesn't count if brakePressed
* enable on rising edge of resume (matches stock)
* not today
* add comment describing the fault this avoids
* cleaner
* handle incrementing speed
* rename
* add test for not changing speed if enabled changes mid-press
* spacey
* ugh
* bumpo
* need this to fix a fault (draft)
* already have
* this should be cancel
* fine to do for all
* fine to do for all
* bump
* bumpo
* bump to master
* Update selfdrive/car/gm/interface.py
* Update selfdrive/car/gm/interface.py
* Update ref_commit
* GM: Handle run-away set speed
* bumpo
* This is a test of both PRs combined
* tempbump
* Revert "tempbump"
This reverts commit b73e04fca2.
* Revert "This is a test of both PRs combined"
This reverts commit 22cc0e6900.
* fix
* bump
* fix that
* Bump to master
* fix fix
* fix runaway set speed for GM
* fix runaway set speed for GM
* Handle resuming to exit standstill generically
* clean that up
* ugh i want to fix all the formatting
* class that manages v_cruise
* better name
* move around
* add depressed_state
* fine to update on pressed change, better name
* cmt
* we need to check CS. button_change_state only works if we exit standstill on rising edge not falling edge
* no defaultdict
* add regen braking field that's just used to add a pedalPressed
* bump
* bump
* Update ref_commit
* we want the standstill check
we want the standstill check
* see what diff is now
* Update ref_commit
* GM camera: use ECM brake pressed bit
* bump panda and use more reliable bit
* bump panda
* back to ECMEngineStatus
* bump
* Update selfdrive/car/gm/carstate.py
* bump panda
* Update ref_commit
* log signed speed
* bump to master
* need this
* fix
* fix...
* see if this works
* just fault fix (no logging or standstill. tho revisit standstill)
* move
* Revert "move"
This reverts commit c564e74666.
* put gm camera voacc behind disable radar toggle
* bump panda
* bump panda
* bump panda
* experimental long
* fixes
* car control notes and fixes for Bolt EUV
* might enable stop and go
* consistent name
* min enable speed seems to be around 5 kph
* camera acc can engage under 5 kph if stopped
* comment
* comment
* remove this for now
* only real brake
* comments
* update max brake
* bump
* clean up/fix
* same if
* simplify
* fix
* old comment
* no brake_pressed
* temporary fault fix
* tune longitudinal
* update docs
* bump panda
* GM camera ACC cars have no regen in ACC
* cleaner
* cleaner
* fix
* set max gas
* fixes
* fix LKAS unavailable warning from camera
* only camera
* bump panda
* bump panda
* bump panda
* bump panda
* clean up gmcan
* clean up CC
* flip
* rm
* rm comment
* clean up
* custom starting/stopping probably not needed
* Update selfdrive/car/gm/carcontroller.py
* fix crash
* long tuning
* we need long control state to resume
* CAMERA_ACC_CAR not needed
* no interp on accel
* tuning
* formatting
* formatting
* formatting
* formatting
* formatting
* no need to init ccp
* makes more sense now
* send at 10hz when inactive
* try to make it fine to switch rates
* fix rate
* todododo
* fine if we skip, we usually send too early
* clean up
* this may be required, 50Hz is not really needed to sync/initialize
* preserves previous behavior (not sure if this makes sense)
* Revert "preserves previous behavior (not sure if this makes sense)"
This reverts commit 3b297bca72.
* Revert "this may be required, 50Hz is not really needed to sync/initialize"
This reverts commit a6b4693814.
* rm com
* Update ref_commit
* gate behind GM Cam
* common logic
* bet
* update refs
Shane Smiskol
Yong-seok, Jang
Adeeb Shihadeh
royjr
Vivek Aithal
koch-cf
Eric Brown
Ricky Gilleland
Tim Wilson
Jason Shuler