* Mazda Port
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Update checksum to account for steer angle signal used in some cars
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Add test drive/segment ID to pass CI tests
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Process gear and brake signals, add new fingerprints
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Refactor some car interface code
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Drop redundant call, use Ecu, move warning to carstate, fix cruise speed
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Drop unused variables, cleanup handsoff tracking
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Update to steerError and steeringRate
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Refactor parse gear, update lkas signals from the new dbc
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Better tracking of engage and warning events
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* remove commented lines, update speed_kph to match panda
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Steer Error
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Set lkas enable speed to 52 kph
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Drop block signal use, fix LGTM alerts
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* When gas is pressed OP will disengage, sync local state with it
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Use car's speed signal instead of wheel speed
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Tidy up disengage events
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Rebase/Refactor with upstream
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Sync stock ACC state with OP
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* mazda dbc file renamed
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Improve acc stock and go by removing the 3 seconds limit
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Dashcam
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* PR Feedback
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Send ACC cancel only if we are sure cruise is enabled
Otherwise we run the risk of disabling main cruise
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* updated route
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* no process replay for now
* add to release files
* Revert "updated route"
This reverts commit 233db4f1bc.
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 34b9b5e849
* Running pre-commit in CI
* fix dockerfile syntax
* dont run on submodule repo folders
* Fix some import errors in ci
* more stuff
* That should be the last one
old-commit-hash: ba2ac1207a
* thneed runs the model
* thneed is doing the hooking
* set kernel args
* thneeding the bufferS
* print the images well
* thneeds with better buffers
* includes
* disasm adreno
* parse packets
* disasm works
* disasm better
* more thneeding
* much thneeding
* much more thneeding
* thneed works i think
* thneed is patient
* thneed works
* 7.7%
* gpuobj sync
* yay, it mallocs now
* cleaning it up, Thneed
* sync objs and set power
* thneed needs inputs and outputs
* thneed in modeld
* special modeld runs
* can't thneed the DSP
* test is weird
* thneed modeld uses 6.4% CPU
* add thneed to release
* move to debug
* delete some junk from the pr
* always track the timestamp
* timestamp hacks in thneed
* create a new command queue
* fix timestamp
* pretty much back to what we had, you can't use SNPE with thneed
* improve thneed test
* disable save log
Co-authored-by: Comma Device <device@comma.ai>
old-commit-hash: 302d06ee70
* add binary to display text
* fake text needs status too
* Rename to TextWindow
Co-authored-by: Comma Device <device@comma.ai>
old-commit-hash: 202a4c2011
* snpe version 1.35.0.698
* fix files common for new snpe
* efficient net with normal names
* compiling with 1.32 works
* actual snpe files
* fix monitoring, delete unneeded
* point the symlinks to the right places
* err, modeld needs the CPU
* benchmark for 50 its
* put back old model for now
Co-authored-by: Comma Device <device@comma.ai>
Co-authored-by: Harald Schafer <harald.the.engineer@gmail.com>
Co-authored-by: George Hotz <geohot@gmail.com>
old-commit-hash: 6e5a2d404b
* Untested implementation of offroad power monitoring
* Fixed some syntax errors
* Cast to int
* Fixed pylint
* Wrapped in class
* Put pulsed calc in own thread
* Longer timeout before starting pulse measurement
* Fudge factor + flake8
* Made integration thread-safe and catch charge disable exceptions
* Catch all calculation errors
* Fixed networkstrength removal
old-commit-hash: 992be20d63
* sentinel WIP
* logger is now a cc, not a c
* simpler code doesn't touch loggerd.cc
* oops, double lock. and logreader is nicer
old-commit-hash: 2f2b85581c
* run openpilot for 60 seconds and report cpu
* Not passive
* Set training version
* Write cpuset
* Add community toggle
* Formatting
* Refactor
* Reorder processes
* Add max cpu
* Try this
* Try this to exit
* Does this work?
* This should work
* now it should work again
old-commit-hash: 3d2696c60b
* full vehicle model simulator
* Add vehicle model
* Model compiles
* Close enough
* Simulation works
* Add fast angle offset
* Tune fast angle offset learner
* Create live service for paramsd
* Better clamping
* Fix rotation matrix
* Cleanup before merge
* move debug script to debug/internal
* revert plannerd change
* switch vehicle model to corolla
* fix valid flag
* Bigger stiffness range
* Lower process noise on steer ratio
* Tuning
* Decimation
* No maha tests
old-commit-hash: c9ecab2139
* add locationd to manager
* add to release files and make linter happy
* Don't ship all models
* Also add locationd.py
* Remove unused import
* Fix import in kalman helpers
old-commit-hash: ff91c6f9d4
* start cleanup
* create generated dir if not exist
* tests pass!
* everything works again
* also convert live_kf to new structure
* Remove sympy helpers from file list
* Add laika to docker container
* Only build models that are present
old-commit-hash: 47fd50ca60