* HKG: Car Port for 2022 Kia Stinger
* Substitute KIA STINGER GT2 2018 torque params
* bump panda
* Add test route
* Update CARS.md
* Not this checksum
* Update test route
* Update CARS.md
* Harness C -> Harness K
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 2d766fee14
* add first draft enable button timeout
* use allow_enable
* it doesn't count if brakePressed
* enable on rising edge of resume (matches stock)
* not today
* add comment describing the fault this avoids
* cleaner
* handle incrementing speed
* rename
* add test for not changing speed if enabled changes mid-press
* spacey
* ugh
* bumpo
* need this to fix a fault (draft)
* already have
* this should be cancel
* fine to do for all
* fine to do for all
* bump
* bumpo
* bump to master
* Update selfdrive/car/gm/interface.py
* Update selfdrive/car/gm/interface.py
* Update ref_commit
old-commit-hash: 15383d3016
* GM: Handle run-away set speed
* bumpo
* This is a test of both PRs combined
* tempbump
* Revert "tempbump"
This reverts commit b73e04fca2.
* Revert "This is a test of both PRs combined"
This reverts commit 22cc0e6900.
* fix
* bump
* fix that
* Bump to master
* fix fix
old-commit-hash: 65f494d845
* fix runaway set speed for GM
* fix runaway set speed for GM
* Handle resuming to exit standstill generically
* clean that up
* ugh i want to fix all the formatting
* class that manages v_cruise
* better name
* move around
* add depressed_state
* fine to update on pressed change, better name
* cmt
* we need to check CS. button_change_state only works if we exit standstill on rising edge not falling edge
* no defaultdict
old-commit-hash: 76ac3d4c99
* add regen braking field that's just used to add a pedalPressed
* bump
* bump
* Update ref_commit
* we want the standstill check
we want the standstill check
* see what diff is now
* Update ref_commit
old-commit-hash: 74b6e22a7d
* GM camera: use ECM brake pressed bit
* bump panda and use more reliable bit
* bump panda
* back to ECMEngineStatus
* bump
* Update selfdrive/car/gm/carstate.py
* bump panda
* Update ref_commit
old-commit-hash: 191b8081b2
* HKG: Car Port for Genesis GV70 2023 thanks to @zunichky!
Co-authored-by: kyle zunich <zunichky@msu.edu>
* Update docs
* Update selfdrive/car/hyundai/values.py
* GV70 does radar SCC, separate them
* One more
* bump panda
* Gate 0x1A0 away from bus 6
* Can't leave out the OG
* EV6 non-HDA2 too?
* bump panda
* bump panda
* Check 0x1a0 based on param
* bump panda
* bump panda
* bit simpler
* fix bit op
* fixes
* bump panda to master
* cmt
* flip
Co-authored-by: kyle zunich <zunichky@msu.edu>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: d62cdc400c
* Hyundai: Car Port for Santa Cruz 2022
* bump opendbc
* New struct and params for CAN-FD ICE models
* fixup! New struct and params for CAN-FD ICE models
* bump panda
* bump panda
* HKG: Car Port for Sportage 2023
* fixup! HKG: Car Port for Sportage 2023
* Kia Sportage 2023: Add FW versions
* Longitudinal Control: ICE CAN-FD models
* fixup! Longitudinal Control: ICE CAN-FD models
* bump panda
* fixup! Longitudinal Control: ICE CAN-FD models
* Update car info
* fixup! Longitudinal Control: ICE CAN-FD models
* Gate radar disable behind HDA2 only
* Gate radar disable behind camera SCC cars
* Update CARS.md
* Add FW versions for Santa Cruz 2021
* Test route for Kia Sportage 2023 (openpilot longitudinal enabled)
* Test route for Santa Cruz 2021 (openpilot longitudinal enabled)
* fixup! Kia Sportage 2023: Add FW versions
* HKG: Car Port for Genesis GV70 2023 thanks to @zunichky!
Co-authored-by: kyle zunich <zunichky@msu.edu>
* Update car info
* Add torque param for GENESIS GV70 1ST GEN
* Fix CARS.md
* Update test route
* Remove unnecessary HDA2 checks
* Add additional FW versions for Sportage 2023
* Fix Kia Sportage supported MY
* Fix MISRA violation
* Fix release note
* Use IntFlag to gate camera SCC for CAN-FD
* Parse 0x1A0 on bus 4 dynamically
* bump panda
* Car code cleanup
* Typo
* Add additional 0x1A0 signals to bus 4
* Fix weird bitwise logic
* Check 0x1a0 after safety config is set
* Revert "Check 0x1a0 after safety config is set"
This reverts commit 141bbf7979.
* Check car list instead
* Add GV70 2022 test route
* Add fwdRadar FW version for GV70 2022
* Fix CARS.md
* Fix CARS.md
* Fix CARS.md
* new santa cruz route
* bump panda to commaai/panda#1031
* bumppanda
* some clean up
* lets refactor CAMERA_SCC_CAR in another pr
* minor clean up
* update docs!
* GV70 is a radar-SCC car :( (another PR)
* fix removed sportage hybrid versions
* update docs
Co-authored-by: kyle zunich <zunichky@msu.edu>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: sshane <shane@smiskol.com>
old-commit-hash: e4342b5e16
* Hyundai: Car Port for Santa Cruz 2022
* bump opendbc
* New struct and params for CAN-FD ICE models
* fixup! New struct and params for CAN-FD ICE models
* bump panda
* bump panda
* HKG: Car Port for Sportage 2023
* fixup! HKG: Car Port for Sportage 2023
* Kia Sportage 2023: Add FW versions
* Longitudinal Control: ICE CAN-FD models
* fixup! Longitudinal Control: ICE CAN-FD models
* bump panda
* fixup! Longitudinal Control: ICE CAN-FD models
* Update car info
* fixup! Longitudinal Control: ICE CAN-FD models
* Gate radar disable behind HDA2 only
* Gate radar disable behind camera SCC cars
* Update CARS.md
* Add FW versions for Santa Cruz 2021
* Test route for Kia Sportage 2023 (openpilot longitudinal enabled)
* Test route for Santa Cruz 2021 (openpilot longitudinal enabled)
* fixup! Kia Sportage 2023: Add FW versions
* HKG: Car Port for Genesis GV70 2023 thanks to @zunichky!
Co-authored-by: kyle zunich <zunichky@msu.edu>
* Update car info
* Add torque param for GENESIS GV70 1ST GEN
* Fix CARS.md
* Update test route
* Remove unnecessary HDA2 checks
* Add additional FW versions for Sportage 2023
* Fix Kia Sportage supported MY
* Fix MISRA violation
* Fix release note
* Use IntFlag to gate camera SCC for CAN-FD
* Parse 0x1A0 on bus 4 dynamically
* bump panda
* Car code cleanup
* Typo
* Add additional 0x1A0 signals to bus 4
* Fix weird bitwise logic
* Check 0x1a0 after safety config is set
* Revert "Check 0x1a0 after safety config is set"
This reverts commit 141bbf7979.
* Check car list instead
* Add GV70 2022 test route
* Add fwdRadar FW version for GV70 2022
* Fix CARS.md
* Fix CARS.md
* Fix CARS.md
* new santa cruz route
* bump panda to commaai/panda#1031
* bumppanda
* some clean up
* lets refactor CAMERA_SCC_CAR in another pr
* minor clean up
* revert car stuff
* revert panda
* revvy
* revvy
* it's all ice
* revert
* revert
Co-authored-by: Jason Wen <haibin.wen3@gmail.com>
Co-authored-by: kyle zunich <zunichky@msu.edu>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: Jason Wen <47793918+sunnyhaibin@users.noreply.github.com>
old-commit-hash: b22fc70f52
* note for dsu cars
* don't hardcode dsu footnote (1/2)
* test
* revert the experimental long toggle
* another day:(
* DSU doesn't have to be toyota specific, it's a generic carParam!
* this is safe, just make sure it's unknown
* these cars do not have OP long for some reason
* UNSUPPORTED_DSU_CAR
* forgot this
* fix autoResume
* fix autoResume 2
old-commit-hash: 3e69973819
* note for dsu cars
* don't hardcode dsu footnote (1/2)
* test
* revert the experimental long toggle
* another day:(
* DSU doesn't have to be toyota specific, it's a generic carParam!
* this is safe, just make sure it's unknown
* these cars do not have OP long for some reason
* UNSUPPORTED_DSU_CAR
* forgot this
* .
* .
* revert
* revert
* smaller diff
old-commit-hash: b0656f2c75
* log signed speed
* bump to master
* need this
* fix
* fix...
* see if this works
* just fault fix (no logging or standstill. tho revisit standstill)
* move
* Revert "move"
This reverts commit c564e74666.
old-commit-hash: e634afb719
* put gm camera voacc behind disable radar toggle
* bump panda
* bump panda
* bump panda
* experimental long
* fixes
* car control notes and fixes for Bolt EUV
* might enable stop and go
* consistent name
* min enable speed seems to be around 5 kph
* camera acc can engage under 5 kph if stopped
* comment
* comment
* remove this for now
* only real brake
* comments
* update max brake
* bump
* clean up/fix
* same if
* simplify
* fix
* old comment
* no brake_pressed
* temporary fault fix
* tune longitudinal
* update docs
* bump panda
* GM camera ACC cars have no regen in ACC
* cleaner
* cleaner
* fix
* set max gas
* fixes
* fix LKAS unavailable warning from camera
* only camera
* bump panda
* bump panda
* bump panda
* bump panda
* clean up gmcan
* clean up CC
* flip
* rm
* rm comment
* clean up
* custom starting/stopping probably not needed
* Update selfdrive/car/gm/carcontroller.py
* fix crash
* long tuning
* we need long control state to resume
* CAMERA_ACC_CAR not needed
* no interp on accel
* tuning
* formatting
* formatting
* formatting
* formatting
* formatting
* no need to init ccp
* makes more sense now
old-commit-hash: 2fb7b4ffad
martinl
AlexandreSato
Igor Biletskyy
Adeeb Shihadeh
Tim Wilson
Vivek Aithal
hoomoose
Harald Schäfer
Jason Wen
Jason Young
Shane Smiskol
Nelson Chen
brownspaceman
Alen
Mehmet Tolga Avcioglu