* first draft copy, needs updates
* gate behind exp mode
* can be one line
* this is no longer true
* toggle isn't just e2e long now, rename
* don't enable/disable
* kinda works!
* remove old giant qstring
* comment clean up
* similar breakpoint
* more clean up
* fixup onroad
* preserve planner behavior, and we don't need to look at confirmed param if we're onroad
* update translations
* vanish translations
* use scene for op long
* lowercase!
* updated copy
* need to check longitudinal here now too
* clean up!
* here is better
* used
* no nav emoji
* don't check param if not valid
* revert this
revert this
* ed
old-commit-hash: f973d605b2
* calibrate speed in the lateral planner
* make speed err helper fn
* check if trans has values
* clip the vel_err
* update refs
old-commit-hash: a599890fed
* add erf based ff
* silly bug; diff of nonlinear != nonlinear of diff
* add sigmoid based ff, ensure slope at 0 > 1
* reduce steer down limit and increase driver allowance
* rebase panda
* atry without friction, and with tanh nonlinear
* finalize the nonlinear function
* do not disable friction compensation in the ff
* bump panda
* bump panda
* update refs
* update refs
* resolve comments
* Add type hints
---------
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 15b880c0ea
* 10s lat
* Full length MPC
* redfine N
* Leave controls the same for now
* Updates
* use long plan in lat plan
* interp plan
* add new interp
* simplergit add selfdrive/controls/plannerd.py selfdrive/controls/
* expand to 10s
* revert this
* fix linter
* Update sconscripts
* fix test
* fix test
* fix test
* Revert "Update sconscripts"
This reverts commit 6e23c69dce.
* Dont import drive helpers
* better compile deps
* fix compile
* comment
* update replay
* Update plannerd time
old-commit-hash: 04fe6c4ec7
* increase lag on prius
* better offline values computation
* split prius ecu more, set deadzone to 0
* add deadzone back
* replace deadzone with slack
* reduce deadzone to 0.2
* update refs
old-commit-hash: 0706b03e8c
* test
* test
* debug
* test
* test
* test
* clean up
* clean up
* add test
* stash
* clean up
* clean up
* clean up
* assert equal
old-commit-hash: 23a7a987f6
* fix runaway set speed for GM
* fix runaway set speed for GM
* Handle resuming to exit standstill generically
* clean that up
* ugh i want to fix all the formatting
* class that manages v_cruise
* better name
* move around
* add depressed_state
* fine to update on pressed change, better name
* cmt
* we need to check CS. button_change_state only works if we exit standstill on rising edge not falling edge
* no defaultdict
old-commit-hash: 76ac3d4c99
* fix runaway set speed for GM
* fix runaway set speed for GM
* Handle resuming to exit standstill generically
* clean that up
* ugh i want to fix all the formatting
* class that manages v_cruise
* better name
* move around
* add depressed_state
* fine to update on pressed change, better name
* revert gm stuff
* revert standstill stuff
* remove
* revert that
* we can put this in here now!
* below update
* actually only used here
* one line
old-commit-hash: 811c096e64
* see if this works at all
* can revert this
* think adding a no entry conditionally is nicer
* then we can revert this
* 0 makes more sense
* Revert "0 makes more sense"
This reverts commit efc89e8a23.
* gm CC uses > 70
* bump cereal
* comment
* test on Honda
* whoops
* works
* add exception with todo
* moved button enable events to controlsd
* get rid of that
get rid of that
* different values for now
* car interfaces add enable event, controlsd can block it
* Regen and update refs
* delete if not set
* One place
one place
* regen routes are uninitialized first few frames
* Trim start of segment so it's like original segment
* stash
* regen
* not working
* clean up
* more cleanup
* revert
* bump ceral
* actually check resume button
* whoops
* pcmCruise cars don't use setSpeed, so we're good
* engage correctly in sim
* Update ref_commit
* Update refs
old-commit-hash: 5ed587ebef
* update names + notes for MPC outputs
"current_curvature" is not the correct description of what the MPC is outputting in it's curvature_ego state.
The MPC is integrating it's free variable, curvature_rate, such that curvature[0] is actually the desired_curvature before any delay.
inversely: the curvature_rate_desired is the desired rate of change to the setpoint and not the actual curvature rate.
If we were to set the initial curvature = measured curvature in the MPC initiation these names would be correct.
This was possibly how it was initially set up but the nomenclature here is now confusing.
* more notes
* match
* Clarify #1
old-commit-hash: b215d611b1
* set while gas pressed to resume
* better order
* what was I thinking?
* Update selfdrive/controls/lib/drive_helpers.py
Co-authored-by: Gijs Koning <gijs-koning@live.nl>
* Update selfdrive/controls/lib/drive_helpers.py
Co-authored-by: Gijs Koning <gijs-koning@live.nl>
* only if under set speed
* some clean up and ciel the v_cruise_kph
* clean up
* actually floor
* Should be cruise min
* On phone, will clean up
* Think no floor is fine
* clean up and catch setCruise
* update comment and just always do rounding and clipping
update comment
* flip order
Co-authored-by: Gijs Koning <gijs-koning@live.nl>
old-commit-hash: d3d210c183
* add metric values
Freedom units have weird multiples compared to metric. Modified so that it increments by 10 km/h on long press and 1 km/h on short press, rather than 8 and 1.6 km/h. This mimics stock hyundai behaviour on metric vehicles.
* use is_metric from controlsd
* use actual mph value instead of rounded
Co-authored-by: Willem Melching <willem.melching@gmail.com>
old-commit-hash: 23b9316603
* refactor
* needs casting
* tests pass
* fix that test
* refactor in controls
* lets not go crazy
* change of names
* use constants
* better naming
* renamed
* soft constraints
* compile slack variables
* rm git conflict
* add slack variables
* unused
* new edition
* fcw
* fix tests
* dividing causes problems
* was way too slow
* take a step back
* byeeee
* for another time
* bad idxs
* little more cpu for cruise mpc
* update refs
* these limits seem fine
* rename
* test model timings fails sometimes
* add default
* save some cpu
* Revert "little more cpu for cruise mpc"
This reverts commit f0a8163ec90e8dc1eabb3c4a4268ad330d23374d.
* Revert "test model timings fails sometimes"
This reverts commit d259d845710ed2cbeb28b383e2600476527d4838.
* update refs
* less cpu
* Revert "Revert "test model timings fails sometimes""
This reverts commit e0263050d9929bfc7ee70c9788234541a4a8461c.
* Revert "less cpu"
This reverts commit 679007472bc2013e7fafb7b17de7a43d6f82359a.
* cleanup
* not too much until we clean up mpc
* more cost on jerk
* change ref
* add todo
* new ref
* indentation
old-commit-hash: be5ddd25cd
* higher is out of the training distribution
* Update RELEASES.md
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: a0cdacbb2a
* start again
* need that too
* this actually works
* not needed
* do properly
* still works
* still works
* still good
* all G without ll
* still works
* all still good
* cleanup building
* cleanup sconscript
* new lane planner
* how on earth is this silent too....
* update
* add rotation radius
* update
* pathplanner first pass
* misc fixes
* fix
* need deep_interp
* local again
* fix
* fix test
* very old
* new replay
* interp properly
* correct length
* another horrible silent bug
* like master
* fix that
* do doubles
* different delay compensation
* make robust to empty msg
* make pass with hack for now
* add some extra
* update ref for increased leg
* test cpu usage on this pr
* tiny bit faster
* purge numpy
* update ref
* not needed
* ready for merge
* try again after recompile
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 158210cde8
Adeeb Shihadeh
Justin Newberry
Shane Smiskol
Vivek Aithal
Harald Schäfer
Lee Jong Mun
grekiki
ClockeNessMnstr
Jason Young
martinl
Willem Melching
speedking456
Greg Hogan
eFini
Adeeb
George Hotz
Vehicle Researcher