* add function
* split model and years
* typing and clean uop
* one function to split into make, model, years
* add test for bad years
* simpler re
* don't match only numbers
* clean up
* we can just use name
* clean up
* RamInit
* bump submodules
* lil cleanup
* clean up carstate formatting and platform grouping
make tuple
* give it a gold torque star (looks around 2.4 from rough data)
* Dasm Fault
* bump panda
* more cleanup
* cleanup car state
* more cleanup
* some fixes
* remove more stuff
* fix angle signal scaling and fix lkas control bit
* bump panda
* update those
* same limits as pacifica
* cleanup hud alert building
* better fault logic
* fix rate
* set ahb
* bring that back
* update refs
Co-authored-by: Jonathan <jraycec@gmail.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
Co-authored-by: Comma Device <device@comma.ai>
* Ascent has good torque, hard code Toyota, print all unexpected torque star cars
* update docs
* Use subtests
* hardcode CHR for now
generate
* Hard code Impreza
* update refs
* master 2022 Civic
* bump panda
* bump
* bump cereal
* fix
* needed
* try for now
* maybe
* revert for now
* move to Cam parser
* fix
* move to cam
* need AEB_STATUS too
* bump for debug prints
* bump opendbc and add cruise_params
* bump opendbc and update cruise_params
* bump
* test route
* update ref
* Revert "update ref"
This reverts commit 28345dab63.
* cleanup
* just to test
* bump
* revert
* need to send val 12 too?
* change bus
* not needed
* update bus
* syntax
* move this to other bus too
* Revert "move this to other bus too"
This reverts commit 770bf4745e.
* test new lane line signal
* needed too
* maybe need both?
* Test new LKAS hud message
* bump
* missing comma
* missing
* maybe
* add frame and idx
* add in hud_lanes
* switch this too
* bump panda
* add this
* I guess need this too
* to match
* also
* wasnt correct
* bump opendbc
* bump panda
* move to cam parser
* missing
* add here too
* bump
* remove from cam parser
* bump
* back to cam parser
* its 5hz
* bump for new checksum function
* bump for correct frequency
* update frame and idx
* bump
* bump and update
* send set me bit
* bump
* pass these values through
* silly atom
* ret
* fix this
* use copy instead
* add these too
* to check keyerror
* switch
* bump submodules
* send too
* proper
* Replace HUD with BOH
* add dashed lanes
* small fix
* clean up
* not needed anymore
* remove and change
* this too
* dont always set
* remove additional LKAS message
* bump
* add
* to test
* add frame
* bump
* rebase
* remove default values
* rename
* clean up some carstate logic
* regenerate docs
* spacing
* simplify more logic
* bump opendbc
* bump opendbc
* only if radarless
* panda at least builds now
* add comment
* bump
* fixes
* bump opendbc
* bump opendbc
fix for new DBC
* bump opendbc
* bump opendbc
* carstate: fix bus, parser signals
* Set safety param
* pt bus is 0, not 1
* Fix SCM_BUTTONS and bump panda and opendbc
* fixes for ACC_CONTROL
* bump opendbc
* bump opendbc
* convert from MPH on HONDA_BOSCH_RADARLESS
move is_metric
* make sure we don't disable if radarless
* don't show incorrect harness on website
don't show incorrect harness on website
* bump panda
* remove/update comments
* bump panda
* Fix harnesses
* one line check
* bump opendbc
* remove this
* Some carstate cleanup
We removed STANDSTILL->WHEELS_MOVING
we don't use CRUISE_PARAMS
add back
add back
* more cleanup
* update docs
* marketing says it has TJA and ACC with low speed follow
* send buttons on bus 0
bump panda
* comment
* camera needs to see buttons on bus 2
comment
* bump panda
* add to releases
* remove comments
* comment
* we don't use stock hud yet
Co-authored-by: vanillagorillaa <ntmccoy@yahoo.com>
Co-authored-by: vanillagorillaa <31773928+vanillagorillaa@users.noreply.github.com>
Co-authored-by: kevinharbin <76784413+kevinharbin@users.noreply.github.com>
* json
* better naem
* Read from table
* formatting and default to nan
* Generate docs
* Read from table
* this should be the same
* Prius v is full
* test we always set the tunes correctly
add to release files
* Set for all cars
Set for all cars
* Revert tuning changes
Revert tuning changes
* remove that
* fixes
* update ref commit for new maxLateralAccels
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* Prius has good steering control now
* 1.5 is the threshold for good torque
* get back down there, hondas
* half stars for 1.0-1.5
* show number of cars
* try bigger
* emphasize tiers
balanced
* Add half star
* Update ref_commit
* add support for 2021 Hyundai Tucson
base configuration and fingerprints
* fix fcw again and don't use mando radar for tucson
* last fixes for working tucson
* Apply suggestions from code review
* add to cars
* increase steerRatio
* missing car info
* one platform
* rename
* add min enable speed
* update releases
Co-authored-by: bluesforte <harry3b9@gmail.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Set good torque using torque controller tuning
* should be equal to
* save lateral accel to car params
* use maxLateralAccel
* always
* same convention
* nan will always evaluate to false
* The great good torque purge
* adjust default friction
* Add data for more cars
* adjust name
* Welcome back, guys. Only adjust good torque if maxLatAccel is set
* Update refs (1.7 is 1.7000001...)
* support for ICE 2022 RAV4
* add to releases
* swap
* add fingerprints from a5c341bb250ca2f0
* update test route
* update docs
* add test for rav4
* values.py is a comma file
* Add harness information
* test harness enum
* add harness info for tucson
* update Tucson harness
* get rid of development
* make global enum
* fix
* add harness info
* add harness info to CARS.md (since we need multiple lines per HKG platform)
* revert this
* Actively Maintained means something! (aka, to bronze with select VW)
* fix caravelle
* add harness tooltip on maintained column
fix
* lol tubaru
* always assume harness
* update honda harnesses
* add Ioniq hybrid 2017-19 harness, todo: not sure
* unused import
* hmm, did they really switch to the C for 1 year??
* add comment
* add comments
* adding tooltips should be fine
* fix santa fe harness
* welcome back, vw
* no need for two harness strings
* seems fine
* fix 19-20 Niro EV harness
* these were taking from old database, so assume correct
* could be d
* pass all car info into template
* no more tool tips
* these use j533 harnesses
* accidentally got removed in merge
* also merge issue
* don't need these
* make harness non-optional
* add panda flag for toyota stock long with camera
* clean up
* Add 2022 RAV4 Hybrid from Philly
* fix wrong fw in interface, did this ever work?
* Must be a hybrid
* no radar parsing
* fix can error
* move to own platform
* generate docs
* fix
* Add 2022 Rav4 XSE Australia fingerprint parameters (#24303)
* Update values.py
Add 2022 Rav4 XSE Australia
* add commas
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* bump panda
* wait, the camera doesn't even send 0x343, right?
* use a set instead, more obvious
* don't test without a parser
* bump panda
* flip panda flag
* bump panda
* add commas
* regen and update refs
* set to none by default
* revert parenthesis
* update comment
* bump panda
* regen and update refs
* add test models and update readme
* bump to master
Co-authored-by: BrettLynch123 <34538435+BrettLynch123@users.noreply.github.com>
* Extend Lexus RX compatibility to 2022
Sorry, I should've done it when I submitted this PR a couple months ago...
https://github.com/commaai/openpilot/pull/23691
* Revert "Extend Lexus RX compatibility to 2022"
This reverts commit b6a4c5f82c.
* Extend Lexus RX compatibility to 2022 via CarInfo
* Extend Lexus RX compatibility to 2022 in docs
Adeeb Shihadeh
Shane Smiskol
bnoeldner
Erich Moraga
Jason Young
Jafar Al-Gharaibeh
martinl
HaraldSchafer
George Hotz
AlexandreSato
Brandon Zimmerman
Jason Wen