* What if: no signals! 🙅🤌🎆
* do hyundai
* honda!
* do gm
* and vw! (sorry comments)
* do those
* -500
* little more
* fix subie
* change back
* bumpopendbc
* oof lol
* messages
* some clean up
* here too
* clean up honda radar_interface.py
fix
rm
* bump opendbc to master
* add todo
* rename checks in tesla/radar_interface
---------
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: cbfcc40571
* draft
* bump opendbc
* still draft
* that's not right
* superset of the changes, 33hz
* cleanup
* this should work
* remove line
* pass it in again
* actually no need to check updated now
* now_nanos
* consistent name
* fix replay
* one line isn't that bad
switch
switch
* fix CarController tests
* Update ref_commit
old-commit-hash: 8f5057ff2d
* Reliable relay open
* Reliable relay close
* ign in a loop
* fixes
* we need this
* log
* comment to remind me tmrw
* ign fix
* this makes it 2x more reliable, but messyyy
* Revert "this makes it 2x more reliable, but messyyy"
This reverts commit 03401dc4a7.
* revert non-related stuff
* comments, spaces
* a stands for indefinite article
* not applicable for non-camera acc
* something...
* Revert "something..."
This reverts commit de8a158488.
* Update ref_commit
old-commit-hash: 022ef679e6
* add regen braking field that's just used to add a pedalPressed
* bump
* bump
* Update ref_commit
* we want the standstill check
we want the standstill check
* see what diff is now
* Update ref_commit
old-commit-hash: 74b6e22a7d
* GM camera: use ECM brake pressed bit
* bump panda and use more reliable bit
* bump panda
* back to ECMEngineStatus
* bump
* Update selfdrive/car/gm/carstate.py
* bump panda
* Update ref_commit
old-commit-hash: 191b8081b2
* log signed speed
* bump to master
* need this
* fix
* fix...
* see if this works
* just fault fix (no logging or standstill. tho revisit standstill)
* move
* Revert "move"
This reverts commit c564e74666.
old-commit-hash: e634afb719
* add delay to GM camera ACC cancel to avoid FCW and cruise fault
* we can revert brake pressed threshold now
* bump panda
* add proper threshold
* bump
* bujmp panda
old-commit-hash: 6efd2c3de3
* add all signals
* try to forward this PSCMStatus
* fixes
* see if this works
* modify checksum when bit flipped
* bump opendbc
* so i can test without restarting
* bump
* bump panda
* clean up
* comment
* also fix this
* bump
* bump
* every 5 seconds
* only send our values
* fix
* try sending everything again (+1 counter)
* revert
* revert, forward msg
* forward
* fix that
* bump panda
* bump panda
* fine to not copy
* after cancel, pass bus
* fix
* Revert "fine to not copy"
This reverts commit 654ac1a7da.
old-commit-hash: 63d552cafc
* gm: match panda standstill check
* fix
* needs to be <= 10 to avoid a fault, fix for safety tests
* fix
* fix
* bump panda to master
old-commit-hash: 826d8a8ae3
* GM camera ACC: no faults on start up 2.0
And by 2.0 I mean we don't need to wait for blocked msg support to be merged first to merge this without regressing accidental single blocked msg count handling.
* Send the camera counter + 1
* Keep updating the first counter until we get a message on the bus
* Only update right before sending so sent_lka_steering_cmd is updated first
* Update ref_commit
old-commit-hash: 0f94d81b7a
* This brake position value disengages stock ACC, use it to avoid controls mismatch. 2016-2017 Volt will hit this threshold and disengage, must install new design of brake pedal retaining clip, TSB 16-NA-147.
* 80 hz
* comment
* bump panda
* update refs
* bump panda
* bump panda
* bump panda
* bump panda to master
Co-authored-by: qadmus <42746943+qadmus@users.noreply.github.com>
old-commit-hash: 6ce511cc60
* Switch to ECMPRDNL2 for GM gear
* Removing manumatic gear #
* values.py almost complete
* Silverado and Bolt EUV val and CP
* GM controller updated
* Cam hrns supp done (in theory)
* cleanup for new cars
* Remove extra constant
* WS, etc cleanup
* removing the unused
* Fix kpBP typo
* Updated docs
* Skip's PIF tune
* Dropped LKA CAN error patch
* Add silverado sigmoid ff
* CAN Err & LKA latch patch
* Remove EPS fault fix (another PR)
* Remove Silverado (another PR)
* clean up some common params
* Remove Escalade FP
Remove Escalade FP
* comment
* Premier is just a trim
Premier is just a trim
Premier is just a trim
* no footnote: new Bolt is like most other cars, older GM were outliers not at the camera
* clean up
clean up
* bump panda
* bump panda
* bump panda
* bump panda
* bump panda
* remove comments
* try spamming buttons on bus 2
* bump panda
* bumping opendbc w btn rc
* not needed for this port
This reverts commit 6af1f0ba79.
* add button safety
* Send next rc when spamming btns
* forward other signals in message
* missing DriveModeButton
* fill cruiseState.speed
* see if resume works without counter
* try the whole message
* send immediately and at 10Hz
* no resume, back to just button signal
* even holding random buttons it cancels
* Use torque controller with base tune
* stock long GM don't auto-resume yet
* Testing GM zero min steer speed
* Revert latcontrol
* revert opendbc
* latActive is basically lkas_enabled
* Update Bolt torque params
* comment
* clean up
* Add to releases
* Add test route
* Don't specify segment
* bump panda
* bump panda
* no harness for Bolt just yet
* Apply suggestions from code review
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* We support all and 2023
* move safetyParam up to first cam check
* Bump panda and update docs
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 4ffe9e68db
* Interface radarOffCan set, comments
* pass pcmCruise value to common events
* add transType and networkLoc to iface
* carstate use transtype to detect EV
* ctrl: limit sends by config
* Add clarifying comments for new vals
* clean up
* comment on new line
* these have the same frequency
* remove 25hz
* add to upper comment
* update refs
* update refs
* move into same block
move into same block
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 9279c02258
* Revert "GM: Fix noisy brake pressed (#23712)"
This reverts commit 2cd30c56d9e591d547ebf16292dd6b75aeee9fdd.
* keep this
* same check, but don't clip CS.brake
* bump panda
* bump panda to master
old-commit-hash: 1b114464a9
* GM: Use ECMEngineStatus.Brake_Pressed
* consistent style
* add TODO
* bump panda
bump panda
* it should
* bump panda
Co-authored-by: Jason Shuler <jshuler@gmail.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: dd76cfcf28
* add CarParams.wheelSpeedFactor
* Fudge speed for Lexus RX
* should have been the TSS2 model
* bump cereal
* refactor into function
* update refs
old-commit-hash: e6180738fd
Shane Smiskol
Adeeb Shihadeh
Jason Shuler
Willem Melching
Jason Young
qadmus
Adeeb Shihadeh