* json
* better naem
* Read from table
* formatting and default to nan
* Generate docs
* Read from table
* this should be the same
* Prius v is full
* test we always set the tunes correctly
add to release files
* Set for all cars
Set for all cars
* Revert tuning changes
Revert tuning changes
* remove that
* fixes
* update ref commit for new maxLateralAccels
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 3066ad81a8
* Set good torque using torque controller tuning
* should be equal to
* save lateral accel to car params
* use maxLateralAccel
* always
* same convention
* nan will always evaluate to false
* The great good torque purge
* adjust default friction
* Add data for more cars
* adjust name
* Welcome back, guys. Only adjust good torque if maxLatAccel is set
* Update refs (1.7 is 1.7000001...)
old-commit-hash: c6bc03311c
* Revert "Revert torque control (#24565)"
This reverts commit 93f434d047a92366c4ccefeece86fe101ed98d02.
* Move tune out of car specific stuff
* Update ref commit
old-commit-hash: d928972150
* support for ICE 2022 RAV4
* add to releases
* swap
* add fingerprints from a5c341bb250ca2f0
* update test route
* update docs
* add test for rav4
* values.py is a comma file
old-commit-hash: bdaf174154
* add panda flag for toyota stock long with camera
* clean up
* Add 2022 RAV4 Hybrid from Philly
* fix wrong fw in interface, did this ever work?
* Must be a hybrid
* no radar parsing
* fix can error
* move to own platform
* generate docs
* fix
* Add 2022 Rav4 XSE Australia fingerprint parameters (#24303)
* Update values.py
Add 2022 Rav4 XSE Australia
* add commas
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* bump panda
* wait, the camera doesn't even send 0x343, right?
* use a set instead, more obvious
* don't test without a parser
* bump panda
* flip panda flag
* bump panda
* add commas
* regen and update refs
* set to none by default
* revert parenthesis
* update comment
* bump panda
* regen and update refs
* add test models and update readme
* bump to master
Co-authored-by: BrettLynch123 <34538435+BrettLynch123@users.noreply.github.com>
old-commit-hash: c1caca104f
* Initial commit
* Fix bugs
* Need more torque rate
* Cleanup cray cray control
* Write nicely
* Chiiil
* Not relevant for cray cray control
* Do some logging
* Seems like it has more torque than I thought
* Bit more feedforward
* Tune change
* Retune
* Retune
* Little more chill
* Add coroll
* Add corolla
* Give craycray a good name
* Update to proper logging
* D to the PI
* Should be in radians
* Add d
* Start oscillations
* Add D term
* Only change torque rate limits for new tune
* Add d logging
* Should be enough
* Wrong sign in D
* Downtune a little
* Needed to prevent faults
* Add lqr rav4 to tune
* Try derivative again
* Data based retune
* Data based retune
* add friction compensation
* Doesnt need too much P with friction comp
* remove lqr
* Remove kd
* Fix tests
* fix tests
* Too much error
* Get roll induced error under 1cm/deg
* Too much jitter
* Do roll comp
* Add ki
* Final update
* Update refs
* Cleanup latcontrol_torque a little more
old-commit-hash: fe0bcdaef6
* clean up CarController with intermediate variables only accessed once or twice
* format
* fixes and move frame to CarController
old-commit-hash: facf6c109d
* proof of concept
* actuators packet describes which actuators are active
* bump cereal
* fixes
* not needed for this PR
* Do Toyota
* add back controlsState.active
* bump cereal
* rest of cars
* in actuators
* add active back
* which
* use controlsState.active for now
* will make an issue
* Update selfdrive/controls/controlsd.py
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* move local lat_active checks into CC.latActive
* remove redundant checks
* move comment
move comment
* fix joystick mode
* get enabled from carcontrol
* do standstill check in controlsd
* make sure we consider the gas press case for GM
* use CC.actuators
* fix
* capitalization
* Bump cereal
Bump cereal
* make intermediate actuators
* similar convention to before
* clean that up
* update refs
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 629399a449
* Fine tune Prius-V control parameter
* Adjust DBC file and enable SNG support
*Adjust the DBC file to CT200H, the parameters of this model are closer to PRIUS V
*Add PRIUS V to NO_STOP_TIMER_CAR list to enable SNG support
* Update interface.py
remove spaces
* Update values.py
Mod DBC to toyota_rav4_2017_pt_generated
* Update values.py
The file has been updated to resolve the conflict and can be directly merged
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: eaebf01e58
* use scaling
* or we can do it this way
* define default in one place
* just specify
* Revert "just specify"
This reverts commit 40b7b28f84.
old-commit-hash: 3c62d9da09
* check in tuple instead of list
* Update selfdrive/car/toyota/carcontroller.py
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* Update selfdrive/car/mazda/interface.py
Co-authored-by: Willem Melching <willem.melching@gmail.com>
Co-authored-by: Willem Melching <willem.melching@gmail.com>
old-commit-hash: a653461dec
* remove starting state
* new ref
* ready for merge
* try this
* cereal now on master
Co-authored-by: Harald Schafer <harald.the.engineer@gmail.com>
old-commit-hash: cf9792dc53
* add CarParams.wheelSpeedFactor
* Fudge speed for Lexus RX
* should have been the TSS2 model
* bump cereal
* refactor into function
* update refs
old-commit-hash: e6180738fd
* Add f/w firmware for Lexus RC under LEXUS_IS
`@ph33rl355#0529` 2020 Lexus RC F Track Edition DongleID/route 32696cea52831b02|2021-11-16--23-12-02
Doesn't seem to need a full port, per user feedback...
https://discord.com/channels/469524606043160576/524327905937850394/910400788319326229
* Update CARS.md
* Separated Lexus RC from IS... still using IS DBC
* match lexus IS for now
* Update wheelbase to match published specs
I'm hesitant to touch `mass`, even though I know it's different from the IS.
* Add TOYOTA.LEXUS_RC test route
Co-authored-by: Willem Melching <willem.melching@gmail.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: d630ec9092
* use ISO 15622:2018 limits in PID controller
* allow more for nidec
* limit PID inputs
* CP is not needed
* add GM
* not used
* update ref
* fix honda bosch
old-commit-hash: f941111dcd
HaraldSchafer
AlexandreSato
Shane Smiskol
ntegan1
cydia2020
Adeeb Shihadeh
【TIM】
Dean Lee
Willem Melching
Erich Moraga
Robbe Derks