This fixes the botched PR I did yesterday...
https://github.com/commaai/openpilot/pull/1671
Accidentally used CAR.LEXUS_RXH_TSS2 firmware from my clipboard yesterday, instead of @gweedor#9653's... Today I was extra careful ;-)
@gweedor#9653 DongleID 28f8c941d8b28743
* start cleanup
* whitelist submodule release files
* don't need to ship tests
* revert changes to build script
* add those tests back
* fix typo
* whitelist dbcs
* test
* run the right test
* whitelist opendbc/can
* revert that
* add missing dotfiles
* clean up
* ford DBCs
Co-authored-by: Comma Device <device@comma.ai>
I thought I was missing a rounding in Mazda code, but it turned
out to be a missing rounding after the recent event refactoring
Python3 interpreter:
>>> print(" %d %d" % (1.6,1.4))
1 1
>>> print(" %d %d" % (round(1.6),round(1.4)))
2 1
>>> print(" %d %d" % (int(round(1.6)),round(1.4)))
2 1
>>> print(" %d %d" % (int(round(1.6)),int(round(1.4))))
2 1
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Slower rate for ACC cancel msg to avoid cruise disable
Sending ACC cancel message at 10hz may end up disabling
main cruise state. That is because stoc ACC use the same
signal for both functions. If cruise is already enabled
the signal canceles it, otherwise cruise is disabled.
10hz seems to be still fast in some cases not allowing
the state to sync up between OP and the Stock state.
5hz avoids that issue. Also, the resume message was also
updated to 5hz as that seems to work better as well.
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Round up 27.96 to 28mph
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Added Rogue 2019/Leaf 2019 fingerprints
* Added Rogue as new car. Updated readme
* Added route to test_car_models.py. Fixed if statements to check against rogue/x-trail
* Fixed paste error
* Merged Leaf fingerprints
* Assume Rogue is MPH until we work out the mph/kph bit
commit 012049274fd5573bdc5d2d0f198817646dfd5a1b
Author: Willem Melching <willem.melching@gmail.com>
Date: Sat May 30 10:40:49 2020 -0700
update ref
commit d50cc2d81f
Author: Jason Young <jyoung8607@gmail.com>
Date: Sat May 30 10:32:25 2020 -0400
Discard no-longer-used import
commit c092e6f509
Author: Jason Young <jyoung8607@gmail.com>
Date: Sat May 30 10:21:57 2020 -0400
Improved tune from community
* Mazda Port
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Update checksum to account for steer angle signal used in some cars
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Add test drive/segment ID to pass CI tests
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Process gear and brake signals, add new fingerprints
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Refactor some car interface code
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Drop redundant call, use Ecu, move warning to carstate, fix cruise speed
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Drop unused variables, cleanup handsoff tracking
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Update to steerError and steeringRate
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Refactor parse gear, update lkas signals from the new dbc
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Better tracking of engage and warning events
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* remove commented lines, update speed_kph to match panda
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Steer Error
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Set lkas enable speed to 52 kph
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Drop block signal use, fix LGTM alerts
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* When gas is pressed OP will disengage, sync local state with it
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Use car's speed signal instead of wheel speed
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Tidy up disengage events
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Rebase/Refactor with upstream
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Sync stock ACC state with OP
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* mazda dbc file renamed
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Improve acc stock and go by removing the 3 seconds limit
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Dashcam
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* PR Feedback
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* Send ACC cancel only if we are sure cruise is enabled
Otherwise we run the risk of disabling main cruise
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* updated route
Signed-off-by: Jafar Al-Gharaibeh <to.jafar@gmail.com>
* no process replay for now
* add to release files
* Revert "updated route"
This reverts commit 233db4f1bc.
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* add sonata interface
update values.py
update values.py
* change sonata_1 to sonata_2019
* add sonata 2019 and forte 2019 to README
prettier fucked me up pretty hard at first
sdfsd
* update README.md
* mock test
Willem Melching
Erich Moraga
VirtuallyChris
Adeeb
xx979xx
Jafar Al-Gharaibeh
cowanhmoore
Andre Volmensky
Adeeb Shihadeh
Kishan Karunaratne
martinl
Thaixican
Tunder (Chris in RL)
Alice Knag
openpilot laptop