* HKG: Kia K5 2021 Car Port
* Update CARS.md and RELEASES.md
* Add test route: Kia K5 2021
* Update firmware format due to recent query change
* Update CARS.md: not all 2021 Kia K5 have SCC
* Update test_routes.py
old-commit-hash: 6018bda2ba
* Add fingerprint: Hyundai Santa Fe 2022
* Update LFAHDA_mfc: Add 2022 Hyundai Santa Fe
* Add car port: Hyundai Santa Fe 2022
* Add test route: Hyundai Santa Fe 2022
* Update RELEASES.md
* Update CARS.md
* Update RELEASES.md
* Remove FPv1 due to deprecation
old-commit-hash: 9acc592cd9
* 2021 Hyundai Sonata N Line: Fingerprint
* Force FPv2: 2021 Hyundai Sonata N Line
* Revert "Force FPv2: 2021 Hyundai Sonata N Line"
This reverts commit 50351a3d17.
* remove too short fw versions
Co-authored-by: Willem Melching <willem.melching@gmail.com>
old-commit-hash: 1ba28af265
* Added fingerprint for Hyundai Elantra 2021
This fingerprint started popping up on my 2021 Hyundai Elantra SEL (non-hybrid).
* Update values.py
* Apply suggestions from code review
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: e8e83a3dcf
* panda
* bring over changes
* dont check car model
* remove comment
* fix typo
* more stuff gated behind long
* not
* not used
* gate that too
* try honda tuning
* clip accel values
* fix up merge
* fix stopping
* add retry logic around knockout
* increase timeout
* keep flipping lead bit
* true for now
* less tuning
* update comment
* 0.1 s is fine now
* merge honda and hyundai knockout
* more lead fields
* another obj bit
* increase timeout
* fix stopping flag
* only lag compensate for braking
* no lead
* less tuning
* only do knockout if not readonly
* try controlling using jerk
* tuning
* try higher stopping rate
* set stopping flag at higher speed
* clip upper jerk when stopping
* remove comments
* tester present 1hz
* use positive start accel
* 1.0 to maybe improve low speed stuff
* no point going over 0
* bump panda
* bump panda
* revert that change
* update ref
old-commit-hash: c4bac6bd68
* HKG: Add FW for 2018 Hyundai Kona EV
* try to fix FCA error on engage
* Update selfdrive/car/hyundai/values.py
Co-authored-by: Willem Melching <willem.melching@gmail.com>
old-commit-hash: acabdf5866
* Added esp fw for Kia Niro EV 2021
* Added Niro EV 2021 to README
* fixed end of line
* Update README.md
* Update README.md
Co-authored-by: Jon Jander <jon.jander@ptj.se>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: 8e38844ab5
* Testing addition of 2019 Kira Niro PHEV
* Testing addition of 2019 Kia Niro PHEV
* Fix typos
* Remove bad Optima fw, switch Niro to FPv2
* Set minimum steer speed for 2019 Kia Niro HEV/PHEV
* Add 2019 Kia Niro PHEV to README
* Fix typo
* apparently we get trailing garbage sometimes
* No FCA11 message, also use ELECT_GEAR
* i am not good with alphabet
* Add test route for Niro HEV
* Remove LFA for 2019; no legacy safety
* minSteerSpeed handling
* vehicle disengages SCC below 10mph
* no longer need Genesis specific code for minSteerSpeed
* simplify
old-commit-hash: cfe97fcc49
* use DriverOverride
* keep using EMS16 msg which is available on manuals, TCS13 is not
* Need to differentiate between hybrid ev and ev
* bump opendbc
* add to release files
* try this
* try this
* fixup
* shouldn't need multiple dbc's
* update comments
* combine phev into ev_hybrid
* clean up
* accel_pedal_pos is a percent
* bump
* bump
* update list name
* do this in another PR
* not 2020+
* explicitly set safety param
* full hyundai gas press test coverage
* bump
* bump
* bump
* bump
* like this convention better
* bump
* revert some null gas_signal changes for now
* revert style change
* Add Ioniq PHEV 2020
* Use appropriate signals
* can't verify this to be true
* defaults
* order should really be opposite...
* original style
* bump panda
* bump
* update releases
* bump panda
* Update test route
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: e7df9adfe3
* Updates to fpv2 values
* Removed x00 changes
* Update incorrect value
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* Remove possible incorrect duplicate value
Co-authored-by: Willem Melching <willem.melching@gmail.com>
Co-authored-by: Willem Melching <willem.melching@gmail.com>
old-commit-hash: 8220056252
* remove unnecessary trim levels from car name
* remove hardcoded strings
* fix process replay
* more fixes
* fix migration
* update ref
old-commit-hash: 7a8f61f4bf