* Emit correct alerts for LDW Left & Right on Subarus
This change switches the ldw event to use VisualAlert.ldw and
alters all cars to use the prior behaviour for that alert, except
global subarus - they emit the correct warning to the dash
* Remove whitespace, and add comment about not overwriting stock alerts
Co-authored-by: Crispin Flowerday <crispin@theflowerdays.com>
* hyundai: set CF_Lkas_ToiFlt for wind down
* hyundai: disable steering on all steer warnings
* Revert "hyundai: set CF_Lkas_ToiFlt for wind down"
This reverts commit 065f0a996d.
* update refs
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* pedal improvements
* pedal tuning under 19 mph, stock tuning above
* Correctly set tuning, and a temporary reference script
* looking good
* use minEnableSpeed
* minEnableSpeed will always be -1 if pedal since it's used for lockout
* add hysteresis around 19 mph for enabling pedal use
* parameterize minAccSpeed (enable speed is -1 when stop and go to allow engage, acc is min limit for acc commands)
* fix Prius later, 5 mph gap around switch speed
* define min_acc_speed in interface and CC
* use pedal gains up to 22 mph, and correctly use hysteresis above the switch speed
* only check this if pedal
* consolidate comment
* Change BP to switch tuning at 19 mph, define global constant
* Start at interceptor status
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* update releases
* typo
* transition tuning from 19 to +3 mph
* change cmd names and update tuning comment
* Update RELEASES.md
* calculate new pedal gains
* little more clear
* even clearer
* same comment convention and hardcode new pedal tune
* bump cereal
* weird, got added in with the rebase
* three possible long tunings: pedal, improved non-pedal, and default non-pedal
* update refs
* future note: don't add submodules when rebasing!
* update refs
* update refs
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Merge unique Accord 1.5 fw versions
* remove all instances of ACCORD_15
* bump opendbc and update dbcs
* Switch between gearbox messages by detecting presence of gearbox msg
* both accord (2t) and accord hybrid use the same gearbox, 1.5t is the outlier
* default to GEARBOX
* add old name to migration
* bump opendbc
* update refs
* change msg name, bump cereal
* Update selfdrive/test/test_routes.py
* update ref
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* improve tools.lib.kbhit and tools.sim.lib.keyboard_ctrl
* unpack more efficiently
* minor improvements
* agnos.py match spec better
* manual_ctrl test missing queue arg
* fix incorrect type annotation
* queues are generic
* varname reuse resulting in incorrect type inference
* bytes().hex() rather than bytes.hex(bytes())
* a bit of type hinting stuff
* Updates to fpv2 values
* Removed x00 changes
* Update incorrect value
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* Remove possible incorrect duplicate value
Co-authored-by: Willem Melching <willem.melching@gmail.com>
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* start to separate Avalon 2019+
* reverts #20824 (2020)...
and removes fw from a 2020 avalon
* revert 2020 fw from #20241
* revert 2021 fw from #19790
* bump opendbc, add smartDsu
* Add only removed fw from listed PRs above and from jryan's 2020
* bump opendbc to master
* comment out any non-original avalon fw
* new fw
* these 2016 (5 byte EPS_STATUS msg) Avalon fws are correct. comment out any 2019+ fw I haven't seen yet
* Add to release files
* these are good too
* nothing on 7e0 yet
* both have their engines on one address
* validated remaining fws! some from adeeb's, chris's, and kumar's PRs
* Add test route for Avalon 2019
* horrible
* Duplicate
* use nodsu dbc. Only difference is the addition of some signals that don't work, and max of BRAKE_PRESSURE is different
* Enablem 2019 Avalon test route
* Update values.py
Add 2019 Altima support (may be specific to VC-Turbo model, do not have NA model to compare to)
* Update README.md
Add 2019 altima
* Update values.py
Combine fingerprint of 2020 + 2019
* Update values.py
* Update values.py
Sort fingerprint values numerically by key
* Refactor and clean up messages and signals
* Reenable checks[] enforcement
* Remove unused message check[]
* Comment touchup
* Make signal table names correct and consistent
* Refactor MqbExtraSignals for clarity
* adding port for 2019 lexus ux 250h
* update README
* added route to test_routes
* added CAR.LEXUS_UXH_TSS2 to IGNORED_FINGERPRINTS
changed test route to a complete route (that will be uploaded)
* unused
* add fw
* forgot h
Co-authored-by: Brian Haugen <brian.haugen@toyota.com>
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Jason Young
jhlee111
nepro012
Nick Eneboe
Cruise Brantley
Camilo Lozano
speedking456
CrispinFlowerday
Adeeb Shihadeh
jma0
Jafar Al-Gharaibeh
Willem Melching
Greg Hogan
ShaneSmiskol
Josh Smith
Robert Hanna
Erich Moraga
jbates9011
Ewan
dingyf12593
martinl
brianhaugen2