* Ford: show longitudinal personality in IPC
Adjust the time gap to 2, 3 or 4 bars for openpilot long.
TODO: set AccTGap_D_Dsply when value changes so that the popup appears
with the new time gap
Depends on #31760.
* ACC UI: show time gap popup when distance changes
* Revert "ACC UI: show time gap popup when distance changes"
This reverts commit c4e8e10970.
* ACC UI: send on distance bars change
* don't need this check - just send on first frame
* enable radar
* manual new track
* Don't filter points
* cleanup
* Update radar_interface.py
* This is non-zero in stock
* add speed
* more extreme
* A few more things
* fixes
* cleanup
* revert that
---------
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Ford: improved ACC UI for OP long
- Show "stopped" status message on IPC when in standstill, similar to stock
- Prevent the distance control UI from appearing on button press (as
this does not influence OP long).
* set lead indicator and only override stock when OP is controlling long
* match DBC
* just ford
* no need to copy this
* or these
* or these
* match DBC order
* remove these
* used in carcontroller
---------
Co-authored-by: Cameron Clough <cameronjclough@gmail.com>
* Ford: fix LateralMotionControl2 checksum
* loop is nice
* these are redundant
* need to shift left, before didn't match
* same, but more conventional
* whoops
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* fordcan cleanup
Co-authored-by: Cameron Clough <cameronjclough@gmail.com>
* no fordcan
Co-authored-by: Cameron Clough <cameronjclough@gmail.com>
* more
Co-authored-by: Cameron Clough <cameronjclough@gmail.com>
* these weren't even used in CS, follow rest of the brands
* we won't use this
* rename to more standard powertrain can bus
* no arguments for lka anymore
* Revert "rename to more standard powertrain can bus"
This reverts commit 0bc3f79f9b.
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* cleanup
* use Veh_V_ActlBrk for vEgoRaw
* remove unused CarState.yaw_data
* less resume spam
* set steering ramp rate
* match DBC range
* add LCA/TJA notes
* add model years
* update Focus steer ratio
* Ford: add EU label to Focus Mk4
* add packages
* add Ford Explorer 2020
Package: Co-Pilot 360 Assist+
Optional on XLT
Standard on Limited, Limited Hybrid, ST and Platinum
https://cdn.dealereprocess.org/cdn/brochures/ford/2020-explorer.pdf
* Ford: steering control with path angle
* Ford: add TJA toggle to buttons
* add Ford Explorer 2021
`62241b0c7fea4589|2022-08-30--11-58-24--0`
Package: Co-Pilot 360 Assist+
Optional on XLT
Standard on Limited, Limited Hybrid, ST and Platinum (same as 2020)
https://cdn.dealereprocess.org/cdn/brochures/ford/2021-explorer.pdf
* Ford: add shiftByWire ECU fw
* angle/steer refactor
* try always stop and go for US models
* no dashcam
* car info
* send resume button
* skip explorer
* escape and focus back in dashcam
* passthru buttons
* fordcan set bus for button message
* toggle off stock traffic jam assist so camera does not enforce driver presence checks
* not used
* update ramp rate/precision notes
* cleanup
* bump steering pressed torque to 0.8 Nm
* add standstill
* bump steer ratio
* try increasing delay?
* fix docs
* add kuga car info
* maybe fix tja toggle?
* compensate for ford roll compensation??
* oops
* better ui
* block non-adaptive
* add note on ui warning for hands on wheel
* try only checking/toggling TJA every 2 seconds
* add car test route
* dashcam only again
* send buttons to camera
* add process replay segment
* cleanup
* bump panda
* add extra FW
Co-authored-by: Cameron Clough <cameronjclough@gmail.com>
* Ford: add Focus Mk4
Also removes support for the Ford Fusion.
* Ford: LKAS/LCA steering and UI CAN commands
* Ford: implement CarController w/ steering and lanes ui
* Ford: FPv2 firmware request
* Ford: Add FW for 2018 Ford Focus
* Ford: add Escape Mk4
* bump panda
* cleanup
* add that back
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* check in tuple instead of list
* Update selfdrive/car/toyota/carcontroller.py
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* Update selfdrive/car/mazda/interface.py
Co-authored-by: Willem Melching <willem.melching@gmail.com>
Co-authored-by: Willem Melching <willem.melching@gmail.com>
Shane Smiskol
Maxime Desroches
Cameron Clough
Adeeb Shihadeh
Harald Schäfer
Dean Lee
Adeeb
George Hotz