* Hyundai: share panda flags with CAN-FD platform
* move that
* only set bit
* bump panda
* panda master
* regen + update refs for new param
old-commit-hash: c782380fc1
* Add missing fw versions for 2019 Optima
* move versions to new platform
* add temp fw version notes
temp notes
* clean up
* Update docs
* add fw versions from the last 180 days
* add tests
* fix
* remove FPv1 for Optima
* seems like the 2016 is the same
* revert
* add versions from our 2019 Optima
* label/move some versions
* add some versions from a 2020! (3d96bd05b5513638)
* this is from the same 2017 as earlier
(4f930156368f7830)
* vin lookup isn't perfect
* Revert "vin lookup isn't perfect"
This reverts commit 62c563bc45.
* a 2020 (df71aec6e636d7e4)
* cleanup, this transmission is also a 2020 version
df71aec6e636d7e4|2021-10-07--17-59-28
* this comes with scc
* one line
* revert
* bump panda
* add our transmission FW
* Add test route
old-commit-hash: 2c9f751616
* Change ramp limits to 2/2 for CANFD cars
* Only the high torque CANFD cars
* comment
* Update selfdrive/car/hyundai/values.py
* Better to do 2/3 and for all cars
* bump to master
* update refs
old-commit-hash: d57e07eec0
* Add VMCU address for EV6
* Rename vmcu
* add to tests
add to tests
* rename to more generic name
* more explicit
* remove print
* Like this much better, removes subtle fingerprinting problems
* clean up
* add test and clean up
* remove hyundai stuffs
* global
* Fpv2Config class
* fix missing fw versions from import order
* unused
* revert for now
* test for fpv2 configs with subtests
* subtests don't work that way
* do toyota as an example
* revert
revert
* do chrysler
* do rest
* stash
* much smaller of a diff than the alternative
* remove unused test
* fix tests
* remove brand from Request
* Make StandardQueries class
* add missing_ecus
clean up
* rename file
* unused
* test implemented
* add comment and rename
add comment and rename
add comment and rename
* should be impossible now
* this is a fixme
* rename to fw_query
* rename this too
* and this
* move vin queries to class
* order
* can use p16!
* formatting
* whoops, this wasn't gated on not len(found_versions)
* make this clear
* Standardize manufacturer software version query
old-commit-hash: 0ef6bb48df
* Hyundai: Car Port for Tucson Hybrid 2022
* Update RELEASES.md
* Init gear_msg at the top
* FW versions from script
* Button send attempt
* start with some cleanup
* Send button fixed bits
* Define all bytes and only send PAUSE/RESUME
* Use CRUISE_INFO to cancel cruise and resume
* 8-bit counter
* Cleanup ish
* 8 bit counter
* Send at 20ms
* Disengage bits
* Revert bump submodules
* Allow tx on 0x1a0
* Fix byte counts
* Send LFA and HDA icons based on engageability
* Send cruise buttons only on HDA2 cars for now
* Add comments
* Add FLAG_HYUNDAI_CANFD_HDA2 flag
* Update interface.py
* Update carstate.py
* Update carstate.py
* Update carstate.py
* Bump submodules
* Bump panda
* Bump opendbc
* Allow tx with CRUISE_INACTIVE
* GEAR has 24 bytes only
* Generate car docs
* Fix CRUISE_INFO copy
* Remove unused class
* Add CAN-FD busses to unit test
* Bump opendbc
* Revert "Add CAN-FD busses to unit test"
This reverts commit 2f751640408a7f73a9100947cbd95ea13fbb8a48.
* Remove duplicate
* New tune based on data
* Panda safety cleanup
* Include bus 0 in rx checks
* Missed one
* bus 6 check
* Remove redundant check
* Add comments
* Bump opendbc
* Sync with DBC
* Hide LFA icon when disengaged
* Little endian
* fix comment
* more conditions in carcontroller
* update pedal signal
* update tuning
* cleanup carcontroller
* bump panda
* fix mismatch
* alt buttons
* little more cleanup
* update refs for EV6 new safety param
* bump panda
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: bd5e28909f
* Add car port: Kia Niro Plug-In Hybrid 2018
* Add additional FW version
* Low speed lockout 32 MPH
* Add test route
* min_steer_speed in CarInfo
* Remove min_steer_speed from CarInfo
* Add to CARS.md
* run generator
* update min enable speed and regen
* update ci routes
* these are the same car
* i think we only add a note if it's a new platform
* fix HEV -> PHEV
* Add test route
* dup fw
* haha we already support this car in #25187
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 03b074426a
* Update values.py
Adding 2022 Santa Fe Limited drive train and sensors - 2.5T with Dual Clutch Transmission which is different than the SE/VRT/SEL models.
* Update selfdrive/car/hyundai/values.py
* Add back other FW
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 5f8858266c
* added missing FW for 2022 Elantra SEL
I connected the Comma 3 with Hyundai K Harness and the vehicle was unknown. I worked my way through fingerprint 2.0 and compared the FW I had with this file and added the missing firmware to the Elantra_2021 section. I then went for a drive and it worked as intended. A number of the fwVersion were already there and so I've only added the ones that were missing.
* removed erroneous entries
removed entries that were not labeled Hyundai that I had added.
old-commit-hash: c870d0cbde
* Add video link for Santa Fe 2022
* Update selfdrive/car/hyundai/values.py
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: df48ab9ee2
* Update/cleanup CarInfo
* Update footnote
* this will be on the website
* update docs
Co-authored-by: Jason Shuler <jshuler@gmail.com>
old-commit-hash: e1d38be92f
* Rebase and merge upstream
* Bump panda
* bump panda
* todo comments, minor clean up
* Add test route
* send CLU11 on bus 2
* Update docs
* Use Chrysler cp ternary naming convention
* Add FW version
* Update with latest test route
* Use segment with engaging/disengaging and moving
* sort FW
* push ci route
* add comment
* bump panda
* bump panda
* clean up
* Limit torque
* bump panda
* bump panda
* bump panda
* Add missing FW
* Add CAN fingerprint (need to fix spotty queries)
* missing fingerprints
* bump panda
* use O
* It's 2022, how is SCC still not standard!
* space
* bump panda to master
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 1ab63cc8d8
* add well maintained footnote
* stash
* some updates for the website
* one extensible sort function, pass sort function into template, continue to use "openpilot ACC"
* use items
same
* return a final dict
* Fix descriptions
* Required
* Add detail sentence
* Make string packages into namedtuple
* add temp year parsing
* revert this
* one unified class like harness
* fix static analysis
* Fix body
Fix body
* Make specifics strong
* remove years
* Make Camry footnote more clear
* Revert this too
* Add notCar text, fix steer speed > enable speed (remove comma, no speed mention)
* fix missing years
* group_by_make
* Use full package text
* Only use full package text
* Check car name if notCar, fix imports
* add_years no longer needed, remove 'with Stop and Go'
* fix that
fix that
fix that
* Exception for Nissan and Subaru
* Adjust DSU footnote text
* Fix speed overrides in sentence, CR-V package imp
* init() was being called multiple times, only need to run once to set row
old-commit-hash: c8a90ef586
* hyundai dump
* dump
* optima (good, it doesn't get rid of previous segment values)
* add these comments back for now
* add another from release3 today
old-commit-hash: 444de299b6
hoomoose
Cameron Clough
Adeeb Shihadeh
Shane Smiskol
Julian Pieles
ioniq5-cz
Jason Wen
Alex Vazquez
Squiggle Squaggle
khoi
Christian Gribneau
bnoeldner
haram-KONA