* Update fingerprints.py
Taiwanese Prius Prime fingerprint was identical to the regular prime (107 msgs.), but should really have 110. I have the correct one in there now.
* openpilot 0.4.3.1 (#220)
* Honda Pilot 2017 Port (#161)
* Update README.md
* Update fingerprints.py
* Update carstate.py
* Update hondacan.py
* Update interface.py
* Update interface.py
* Update interface.py
* Update README.md
* Update README.md
* Update README.md
* Update fingerprints.py
* Update carstate.py
* Update hondacan.py
* Update interface.py
* Update carstate.py
* Update hondacan.py
* Update README.md
* Update fingerprints.py
* Update carstate.py
* Update carstate.py
* Update carstate.py
* Update hondacan.py
* Update interface.py
* Update carstate.py
* Update carstate.py
* Update Pilot Fingerprint
* Update fingerprints.py
* Give pilot its own definition and not use ILX
* add pilot argument
* Add Pilot interface
* Add pilot argument
* Update interface.py
* Parse Different gear on pilot
* Add steer max
* Fixed duplication of steer max value
* Adjust PID's for steering
* Update carcontroller.py
* Change Steer Ratio and wheelbase
* Update Steer fault values
Steer fault value of 3, does not seem to effect anything
* Update Kp,Ki Ratio
* Update interface.py
* Update readme for Pilot
* add pilot
* Update fingerprints.py
* Update carstate.py
* add signals
* add signal
* fix restricting video upload to wifi
* Dibs on SAFETY_GM numerical value
To match Panda repo.
* Safety Reference for Honda Bosch
* Update fingerprints.py (#210)
Consolidated my fingerprint and removed duplicates and ordered the fingerprint for the RAV4H. Double Checked.
* Interpolate ki/kp for steering PID loop (#200)
* Interpolate ki/kp for steering PID loop
Very much needed for the Volt port: car ping-pongs with low kp
on high speeeds, and the loop is unstable with high kp on
low speeds.
Also, removes "number or array?" logic from PIController,
now that all the callers use interpolation ofr ki/kp.
* Pass speed to steering PID loop for ki/kp interpolation
* Remove unused numbers import
* Slight changes to UI and Fingerprint for Odyssey Elite (#196)
* Adding back drive time to UI
* Add fingerprint for Odyssey Elite
* Removed extended fingerprint for Elite
* Revert "Adding back drive time to UI"
This reverts commit b9b02f7ff2.
* Squashed 'panda/' changes from 98f29a4..67d5208
67d5208 fix signedness issue in toyota safety
fe15d3f bump pandacan
11c2b08 add fault invalid
2c26e45 add sleep
27c7637 forgot the counter
3a6d7db don't hang
bfa7d2e canloader works
b259e2a can flasher is close to working
83f2edf isotp can support in softloader
7ae7c79 typo
e85cc47 forgot the selfs
190b4f6 start work on canflasher
5c655c9 add recover support
ae3457f usbflash is reliable
f7a0ab0 pedal usbflash works
585d0f9 add way to call isotp
be82899 despite it being bad code, move isotp
000715b start work on pedal canloader
626e312 pedal has a bootstub now
3662d1e redundant check
81e6b0d fix bug
083cd12 should have bounty to refactor that ish
b65d30c bad asserts
b2e6c3f isotp untested support for subaddr
30fd66a Merge pull request #93 from vntarasov/volt
06f5109 Merge pull request #94 from gregjhogan/can-printer-hex
c7d098c Merge pull request #95 from gregjhogan/setup-script
22fe250 Merge pull request #99 from gregjhogan/bit-transition-example
ba16ba3 Merge pull request #100 from gregjhogan/j2534-troubleshooting-instructions
ad08ea4 Merge pull request #90 from gregjhogan/can-forwarding
f3b6f5d added j2534 troubleshooting instructions
858d150 added script to find bits that transition from 0 to 1
c6acac8 added checking pedal interceptor message length
f7226ff added brake safety checks
d0c2634 added gas safety checks
d378e4a removed bosch safety forwarding restriction on 29 bit addresses
5c7ef9e added bosch safety hooks and forwarding
90c64b6 add note
23de8d4 Merge pull request #97 from commaai/pedal_improvements
0261641 added missing python packages
b92b235 fix bytearray encode issue
2434f1c Tweak Volt's brake pedal stickiness
e2f73d2 enable has a whole byte to itself
d5a9e1e correct checksum
f8ed9fa better names
986a14c don't alias pointers
9b8472e add watchdog support
8f0add9 handle faults
1d917f8 split gas set into 2 values, and have a fault state
1b77026 j2534 isn't alpha anymore
fbcc872 Merge pull request #92 from commaai/pedal
8a6f44b pedal is sending messages
08f464c python 3 bro is bad bro
9390961 kline checksum algo was broken...
3b7c33b add kline debug support
aa622bc init values
631ea9f better refactor
eb1fd75 add PEDAL adc sets
ccaa310 don't build with usb
8d4d763 debug console works
bd09883 comma pedal is building
75a29d5 Merge pull request #84 from gregjhogan/j2534-hds
eece37d only the panda has gmlan
9f43abe Merge pull request #89 from vntarasov/volt
5364d43 Merge pull request #88 from vntarasov/smaller-firmware
377a1ec bump version for descriptor fix
4fabdf0 Merge pull request #87 from gregjhogan/usb-multi-packet-control
8580773 fix sending WinUSB Extended Properties Feature Descriptor
6908feb Chevy Volt safety
786a004 Enable optimization to reduce firmware size
d70f43b hack to fix thinkpad
95ab1ae fixed flow control message padding
bbd04d1 updated installer
62216d0 single standalone DLL for J2534 driver
5c9138d fixed 11 bit address issue
f3b0ad2 fix LOOPBACK getting set when DATA_RATE is set
b750d36 updated README
a9a097f lowered CPU utilization
7c26a70 TIS needs unsupported protocols to return an error
42692b4 TIS doesn't like ChannelID being zero
cf126bb SET_CONFIG return error for reserved parameters
2e99dbf fix HDS issues
8203cc8 add is_grey
e946a54 add insecure_okay flag
4363b3e check webpage
4f59ded add secure mode note
6b11fb5 add autosecuring to tests
b27d185 Merge pull request #86 from commaai/better_pairing
4b53b42 elm wifi isn't an automated test
99f85cb Merge pull request #85 from gregjhogan/usb-wcid
0d38060 auto-install WinUSB device driver
c6653ca from python import
38cc0ee add wifi_secure_mode, boots in insecure mode
git-subtree-dir: panda
git-subtree-split: 67d52089a1300b86800d897f2b271e0a24cf6dd6
* Squashed 'opendbc/' changes from 81d9871..aa067f7
aa067f7 Chevy Volt tweaks (#83)
a60c6c4 Toyota: change signal name in EPS_STATUS msg
ce70b1a extra setme field toyota LKAS_HUD
df2a552 toyota missing ACC_CONTROL checksum
48bb293 Revert "Toyota Prius: added a comma specific message to control the speed sent to the EPS"
5f42439 Toyota Prius: added a comma specific message to control the speed sent to the EPS
6f5e8b6 Pedal Interceptor: fault state VAL moved to _comma
efd5f5c add setme to honda ACC_HUD
97fc335 add interceptor to civic
6f40f16 update generator script to allow for multiple imports
9ca956b add setme to toyota STEERING_IPAS
e5afa57 run generator for ipas scaling
8bd1182 Toyota IPAS: proper steer angle unit
f57511e acceleration pedal for gasPressed
c8d1dbc high beams also. likely dashboard message.
9f1c78b high beams for genericToggle
f037d42 turn signal lights (and thus hazard lights)
b35bb08 turn signals
78986cf Revert "turn signals"
ba946c9 turn signals
2af3ecc Speed, braking, and distance signals
f40ab87 Set packet lengths, adding steering rate, adjusted speed
cd59bfa units for speed_right
c2fcce2 speed of right vs left side of car
4ef5fae value table for gear status
97c48e2 tighten up speed bits. brake pressue max comment.
a0cbfd1 add gear status PRNDL
0c82865 initial signals for chrysler pacifica 2017 hybrid
5ed0540 add set me to toyota LKAS_HUD
aecac5d add set me fields to toyota ACC_HUD
5417013 update toyota ACC_CONTROL fields
e91e967 Comma Pedal: made GAS_COMMAND 6 bytes
d04434a Comma Pedal: added state byte and enable bit
c30b2cd Comma Pedal: sending 2 tracks on 0x200
8f72467 Volt doors and belts status (#70)
60f8b6c add set me to lkas hud honda
3c9e335 fix honda pcm gas message size
7ca471d Add 2018 Toyota CHR dbc (#78)
637fe00 set scaling to 1 for brake and gas which have no real unit
62a88d4 Volt: switch to parsing ACC buttons from powertrain CAN (#74)
3fdd47b Volt's gas pedal only and combined gas/acc (#76)
45ec9c9 Add 2017 Honda Ridgeline (#77)
cbd186a Add 2018 Camry Hybrid DBC's (#73)
974eeaf Toyota: re-generated the files after cfbc9ae363f98ef
19ea195 Toyota: more vals for LKA_STATE
cfbc9ae fixed inconsistent factor for speed in Honda dbc files
e7db803 convert all line endings to unix style
git-subtree-dir: opendbc
git-subtree-split: aa067f7079aa12617f7a37d85233e51af44e1bb2
* openpilot v0.4.3 release
* Squashed 'panda/' changes from 67d5208..3125232
3125232 bump version
703c0b4 Gas Interceptor: another fix to gas pressed logic
196d383 Interceptor: fixed gas pressed logic
git-subtree-dir: panda
git-subtree-split: 31252324d98e701c33cb6aeda20af6b549175764
* Squashed 'opendbc/' changes from aa067f7..91e882d
91e882d Updating bosch dbcs to use new format and bringing in new honda changes (#82)
9b32e2e Fix Checksum errors for CH-R (#86)
git-subtree-dir: opendbc
git-subtree-split: 91e882d4a04c129e12d39bcff0bbe56b75166e0f
* openpilot v0.4.3 release
* openpilot v0.4.3.1 release
* fix bug in canpacker for Toyotas with DSU connected (#221)
* update year on civic
* Revert "openpilot 0.4.3.1 (#220)"
This reverts commit 640ab12c72.
* Revert the changes to GM in 0.5.4 (#380) (#386)
* Revert 0.5.4 changes for GM for 18ers
* Redo the refactor of stock control msgs
* Fixed missing CONTROL_MSGS -> STOCK_CONTROL_MSGS
* Remove spacing
* Need candidate array idx
* Cleanup
Uses generic dbc
All car names in alphabetical order
All fingerprints in alphabetical order
Acknowledgement to users who have made each vehicle possible
* no unecessary comments
* Match dbc to opendbc
old-commit-hash: 4d2ff103d6
Tuned kP and kI and Tire Stiffness Factor settings.
Fixes lane centering issues in the following situations:
1. Hugging of left lane line during fast left curving roads
2. Hugging of right lane line during fast right curving roads
3. Left bias in fast lane on crowned roads (sloping down to the left)
4. Right bias in slow lane on crowned roads (sloping down to the right)
Works better when lane_width = 2.85 (vs 3.7 default) in pathplanner.py
old-commit-hash: fdbf1c5938
* hyundai WIP
* steer_driver_factor is 1
* removed unnecessary file
* removed unnecessary code
* Update carcontroller.py
bug fix
* safety tuning and fixed interface stiffness
* better lateral tuning, some fixes
* Fix set speed
* added camera state reading, autoresume from stop, cancel on accel, hud alerts
* WIP
* Updated for Kia Sorento *WIP*
* Cleanup
* clean2
* Bug Fixes
* pre-merge
* Add all the cars!
* Panda to auto-detect Camera Bus
* Move Checksum Check
* Final Sorento Tuning
* Make CAN3 for Cam default
* Update README.md
* update panda, minor aesthetic updates
* few other minor changes
* added steer not allowed alert
* bup panda version to force panda update
* fixed camera alerts
* Revert to using CLU15 for Gear Selection
* Missing Defines
Didn’t realise this was removed as well!
* Change Gear Selection Definitions
Add logic to use transmission message rather than cluster message for all gear selections UNLESS the car in question does not have the known good transmission messages
* Revert Camera CAN Bus
* self.candidate
* fixed fingerpint, tested on Sorento
* Update for Elantra on Hyundai-Dev Branch
Latest Elantra values that correlate to progress Community branch.
old-commit-hash: 5641fc986d
* hyundai WIP
* steer_driver_factor is 1
* removed unnecessary file
* removed unnecessary code
* Update carcontroller.py
bug fix
* safety tuning and fixed interface stiffness
* better lateral tuning, some fixes
* Fix set speed
* added camera state reading, autoresume from stop, cancel on accel, hud alerts
* WIP
* Updated for Kia Sorento *WIP*
* Cleanup
* clean2
* Bug Fixes
* pre-merge
* Add all the cars!
* Panda to auto-detect Camera Bus
* Move Checksum Check
* Final Sorento Tuning
* Make CAN3 for Cam default
* Update README.md
* update panda, minor aesthetic updates
* few other minor changes
* added steer not allowed alert
* bup panda version to force panda update
* fixed camera alerts
old-commit-hash: b3654cbcc9
* Trying to make Highlander ICE stop and go
* Making acceleration slow for fuel efficiency
* Removing annoying commanded disengage beep
* Raised accel_max by 50% and commented on chime
* Testing if Highlander ICE can resume follow from 0
* Returned to 1.5 m/s2 for testing stop and go
* Prep for merging upstream
* Prep for upstream merge item #2
* Added Highlander ICE/Hybrid to Stop and Go
Also updated table of vehicles
* Rollback advertising stop and go for Highlanders
* Fix whitespace
old-commit-hash: 50d9c446cf
* Change dashboard command of GM to use packer
Also, separate "follow distance" from "engaged".
* Fix dashboard setSpeed scaling
old-commit-hash: 012727ef60
In 2017 Volts, PCM fault occurs for a few seconds if ACC gas
is commanded while user presses gas pedal. PID winds up,
and when PCM fault clears, car gets a "max gas" jolt.
In 2018 Volts, PCM fault doesn't time out, which means pre-enable
doesn't work at all, and car would slowly decelerate, while openpilot
thinks it's engaged.
old-commit-hash: 9653f9d6a6
* Honda Odyssey 2019 EX-L PID Tuning.
* Update interface.py - Increased Kp for Odyssey
Increases response from 0.4, but oscillation still occurs in very sharp curves.
old-commit-hash: 8970cc8d70
* Move vehicle state values (that get sent to radar) into values.py file, its a better place for it :)
* idx with offset should only be applied to 0x300
* Adds new honda pilot to vehicle state msg array
old-commit-hash: 54f3c2b373
* Adds Joel's Changes to values, sorted as Rick wanted.
* Adds space at end of file.
* Adds Changes to Steering Ratio for Pilot testing.
* Adding this to steer ratio makes it even 3.33
Not sure if this should go into this PR though or not.
This makes the ratio match the other vehicles in the file. Otherwise it's 3.454545...
* Changes the RAV4 back to not include pedal.
* Updated Comments for Pedal Support
* - Adds menuever test output to gitignore.
- Slight comment update to Ridgeline
* - Cleanup steer status comments
- Adds steering warning for interceptor cars in low speed lockout.
* Cleans up comments.
* Update README.md
* Corrects verbiage in README regarding Comma Pedal on Honda's
* Updates Odyssey and MDX to not add extra warnings for low-speed-lockout.
* Updates Comma Pedal references to use anchor links.
* Minor tweak to README
* Updates RDX to warn no steering below 12mph
* Reverts changes to README, carstate.py, and interface.py
* Removes extra libraries from a prior experiment.
* Replaces README with one from current devel. Hope this fixes spacing issues.
* Adds Pedal back to Honda Cars and sorts fingerprint values
* Fixes spacing changes that were not intentional.
* Fixed carstate no newline at end of file.
* Fixes new line at end of file issue.
* Converted the Long's to Int's
old-commit-hash: ef8e6fb39f
arne182
Andrew Frahn
ErichMoraga
Ted Slesinski
Vehicle Researcher
chassdesk
Chris McCammon
Vasily Tarasov
Kylan
rbiasini
Alex Hill
kegman
Willem Melching
James-T1
Jamezz
wocsor
zeeexsixare
tentious
Joshua F. Rountree
AlexMcInerney
dekerr