* Drain the sockets until the next cycle in python process replay
* Add waiting mechanism to native process replay, which mimics the syncing
* Sort logs when comparing them. Drain all the sockets instead of only recv_socks.
* Reverse the retrieval order of FakeSocket
* Change pub order for torqued
* Update ref commit
* Add support for whitelist-procs to toggle on/off specific processes during regen
* Use process CONFIGS from process_replay to generate fake processes instead of hard-coded values
* Add rawgpsd to fake_daemons. Remove duplicates from replayable_messages.
* Remove duplicate block of code from setup_env
* Remove rawgpsd comment
* indecisive
* rename to generic FW query
* remove code and update comment
* we need this to start off, unless we set multiplexing immediately
* draft
* draft 2
* try that
* can't do this either, boardd might read Enabled after removing, but before setting new Request param
* this should work
* use one less param
* fix params
* match behavior (set all pandas to safety param of 1, disabling multiplexing for fingerprinting
* clean up (some tests may temp break)
* fix param name and sort
* time it
* yes it does matter
* add to hyundai's bus 5 query
* remove hyundai for now
* this should work
* clean up
* clean up
* flip argument around, clean up
* fix test_startup
* some clean up
* rm line
* comment makes more sense
* required typing
* clean up common type
* comments
* Update selfdrive/car/car_helpers.py
* line
* whoops, need to set before vin!
* fix debug
* annoying
* more debugging
* bug fix (needs both keys always)
* debuGG
debuGG
* Revert "debuGG"
This reverts commit 55b2f42932.
* Revert "more debugging"
This reverts commit 02934c3403.
* Revert "annoying"
This reverts commit 8b4e5e0998.
* clean that up
* bumpback
* bumpback
* every second write param
* flip
* stuff
* move up?
* fix timing out in CI
* rm
* 10s lat
* Full length MPC
* redfine N
* Leave controls the same for now
* Updates
* use long plan in lat plan
* interp plan
* simplergit add selfdrive/controls/plannerd.py selfdrive/controls/
* expand to 10s
* revert this
* fix linter
* vizualize
* fix long test
* typo
* cleanup
* compiles
* unused
* unused
* bump cereal
* bump cereal
* use model if no uiplanm
* update replay
* update ref commit
* bump cereal to master
* revert locationd laika change
* switch msg
* change proc replay
* back to gpslocation
* update ref
* no np floats in msg
* Ignore empty laikad messages in mapos
* more tolerance
* c++ doesnt work like that
* laikad update, renaming
* update locationd
* fix naming
* address PR comments
* upsi
* .
* draft to fix replay
* fix process relay to allow no response for messages
* final fix for process replay
* .
* bump cereal
* update process replay ref commit
* reduce wait time
* .
* last ref change
* move laikad helpers to laika
* .
* fix ublox test
* update refs
* add proper qcom replay support
* fix gnss support if both is available
* update refs
* remove left over
* revert laikad msg
* move laika back to master
* init
* fix gps valid flag
* change time
* add gnss to ignore
* remove gps_valid flag
* .
* adopt orientation reset threshold
* .
* update laikad
* .
* fix stanstill KF resets
* test orienation reset count
* update laika
* bump cereal
* fix process replay
* update laika repo
* remove handle gps
* add extra logging for cache
* .
* add more log
* .
* .
* update laika
* dont remove gps code
* inc min satellite count
* update magic vals and add acc drop
* update laika
* upsi
* rem
* bump laika
* use nav and correct
* more fixes
* use sftp
* No more glonass
* Revert "No more glonass"
This reverts commit a76124da50.
* nump laika
* back support old ephemeris cache
* add health to ephemeris message
* bump laika
* remove print
* fix laikad tests
* clean
* remove extra log
* bump laika
* inc timeout for plotjuggler build
* rem cache clear
* .
* enable gps after checks
Co-authored-by: Kurt Nistelberger <kurt.nistelberger@gmail.com>
Co-authored-by: Bruce Wayne <harald.the.engineer@gmail.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
* require fingerprint and FW versions
* add get_non_essential_params()
* comment
* all required
* classmethod, need to allow subclasses to override _get_params
* fix that
* fix
* laikad update, renaming
* update locationd
* address PR comments
* draft to fix replay
* fix process relay to allow no response for messages
* bump cereal
* update process replay ref commit
* move laikad helpers to laika
* fix ublox test
* update refs
* add proper qcom replay support
* fix gnss support if both is available
* update refs
* move laika back to master
* move cereal back to master
Co-authored-by: Kurt Nistelberger <kurt.nistelberger@gmail.com>
* wip torqued
* add basic logic
* setup in manager
* check sanity and publish msg
* add first order filter to outputs
* wire up controlsd, and update gains
* rename intercept to offset
* add cloudlog, live values are not updated
* fix bugs, do not reset points for now
* fix crashes
* rename to main
* fix bugs, works offline
* fix float in cereal bug
* add latacc filter
* randomly choose points, approx for iid
* add variable decay
* local param to capnp instead of dict
* verify works in replay
* use torqued output in controlsd
* use in controlsd; use points from past routes
* controlsd bugfix
* filter before updating gains, needs to be replaced
* save all points to ensure smooth transition across routes, revert friction factor to 1.5
* add filters to prevent noisy low-speed data points; improve fit sanity
* add engaged buffer
* revert lat_acc thresh
* use paramsd realtime process config
* make latacc-to-torque generic, and overrideable
* move freq to 4Hz, avoid storing in np.array, don't publish points in the message
* float instead of np
* remove constant while storing pts
* rename slope, offset to lat_accet_factor, offset
* resolve issues
* use camelcase in all capnp params
* use camelcase everywhere
* reduce latacc threshold or sanity, add car_sane todo, save points properly
* add and check tag
* write param to disk at end of route
* remove args
* rebase op, cereal
* save on exit
* restore default handler
* cpu usage check
* add to process replay
* handle reset better, reduce unnecessary computation
* always publish raw values - useful for debug
* regen routes
* update refs
* checks on cache restore
* check tuning vals too
* clean that up
* reduce cpu usage
* reduce cpu usage by 75%
* cleanup
* optimize further
* handle reset condition better, don't put points in init, use only in corolla
* bump cereal after rebasing
* update refs
* Update common/params.cc
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* remove unnecessary checks
* Update RELEASES.md
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* push
* do process replay
* commit
* update refs
* clean up
* clean up controlsd
* clean up controlsd
* Add assert
* debubuggier param name
* can be peristent
* Revert "can be peristent"
This reverts commit 6e6d3f6423.
* Update selfdrive/test/process_replay/process_replay.py
* Don't set lane change events if we're not able to steer.
* more specific variable name
* update process replay socket config
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Use clocks msg to for first fetch of orbits. Which is sent earlier than ublox msgs
* refactor last_fetch_orbits
* Add comment.
Add test
* increase timeout
* Add clocks to process replay
* fix camera malfunction
* revert
* send in one process to fix frames out of sync
* not used
* revert
* fix and add --no-upload for CI testing
* fingerprint if source is fw
* no FW versions
* ACC on if enabled != 0
* small regen clean up and add HONDA3
* fixes
* revert unneeded changes
* not used
* just alt exp
Co-authored-by: redacid95 <jonathanc.olivier@gmail.com>
* regen and process replay clean up
* test_fuzzy actually uses fingerprint hardcoding
fix
* revert
* revert
* this can be a url or path so just print full variable
* get log
* simplify two nonsense
* not needed
* libyuv is a joke
* clean up
* try small
* fast but not bad
* working
* clean up driverview
* simplified
* thats mirrored
* smol
* tweak
* ref is screen
* w/ ee
* update camera model
* no if TICI
* start
* update pose thresh
* less cpu more dsp
* new libyuv
* new snpe
* add files
* test
* should be fast
* update out len
* trigger test
* use master snpe
* add cereal
* update cereal
* refactor parsing
* missing ;
* get
* wrong type
* test model
* use driver data
* 10829278-72fe-4283-a118-2cef959ce174/1550
* no pf
* adapt driverview
* ;
* rhd learner
* update libyuv buildi x64
* ad4337ea
* remove blink slack
* test
* no
* use toggle
* b16
* fix for nv12
* 5b02cff5 both
* update test
* update cereal
* update cereal
* update cereal
* v2 packets
* revert libyuv
* no /
* update snpemodel
* ;
* memcpy
* fix test
* use toggle in driverview
* update power
* update replay
* Revert "update replay"
This reverts commit 1d0979ca59.
* update model ref
* halve cpu
* fake 8bit onnx runner
* same thresh as report
* cereal master
Co-authored-by: Comma Device <device@comma.ai>
* simulator: support running wide camera only
* proper frame id
* use param name that makes more sense
* do some cleanup
* Update tools/sim/bridge.py
Co-authored-by: Willem Melching <willem.melching@gmail.com>
Kacper Rączy
Harald Schäfer
Adeeb Shihadeh
Shane Smiskol
Kurt Nistelberger
Kurt Nistelberger
Vivek Aithal
Chris Souers
Gijs Koning
Willem Melching
ZwX1616
Lukas Petersson