* Reapply "selfdrive/car: ban imports from external modules" (#32993)
This reverts commit 626d78ec548fe19acfdf3c2c3e063fac3b257dc6.
* controls will just use controls
* also these
* ignore
old-commit-hash: d684d8f0f6
Revert "selfdrive/car: ban imports from external modules (#32973)"
This reverts commit c1e8ff2dbc47ccb07fb41a4e88bfb66af2669254.
old-commit-hash: 35a4a773f1
* format card
* standalone process
* no class member CS, there's no point
also can be confusing; what else could be using this?
* rename CoS
* Update selfdrive/controls/controlsd.py
* never works first time :D
* canRcvTimeout is bool
* hack
* add cpu
* see what testing closet comes up with
* first
* some clean up
* support passable CI, fix test models
* fix startup alert
* process replay changes
* test_fuzzy
* gate carOutput valid on carControl valid
* we should publish after we update carOutput
* controlsd was using actuatorsOutput from 2 frames ago for torque, not the most up to date
* check all checks for carControl in case controlsd dies
* log more timestamps
* more generic latency logger; needs some clean up
latency_logger.py was difficult to understand and modify
* card polls on can and carControl to get latest carControl possible
* temp try to send earlier
* add log
* remove latencylogger
* no mpld3!
* old loop
* detect first event
* normal send
* revert "card polls on can and carControl to get latest carControl possible"
how it was is best
* sheesh! update should be first
* first timestamp
* temp comment ( timestamp is slow :( )
* more final ordering, and make polling on/off test repeatable
* Received can
* new plot timestamps
* clean up
* no poll
* add controllers (draft)
* Revert "add controllers (draft)"
This reverts commit e2c3f01b2f.
* fix that
* conventions
* just use CS
* consider controlsd state machine in card: not fully done
* hmm it's just becoming controlsd
* rm debugging
* Revert "hmm it's just becoming controlsd"
This reverts commit 534a357ee9.
* Revert "just use CS"
This reverts commit 9fa7406f30.
* add vCruise
* migrate car state
* Revert "migrate car state"
This reverts commit 4ae86ca163.
* Revert "add vCruise"
This reverts commit af247a8da4.
* simple state machine in card (doesn't work as is)
* Revert "simple state machine in card (doesn't work as is)"
This reverts commit b4af8a9b0a.
* poll carState without conflate
* bump
* remove state transition
* fix
* update refs
* ignore cumLagMs and don't ignore valid
* fix controls mismatch; controlsd used to set alt exp
* controlsd_config_callback not needed for card
* revert ref temp
* update refs
* no poll
* not builder!
* test fix
* need to migrate initialized
* CC will be a reader
* more as_reader!
* fix None
* init after publish like before - no real difference
* controlsd clean up
* remove redundant check and check passive for init
* stash
* flip
* migrate missing carOutput for controlsd
* Update ref_commit
* bump cereal
* comment
* no class params
* no class
* Revert "no class"
This reverts commit 5499b83c2d.
* add todo
* regen and update refs
* fix
* update refs
* and fix that
* should be controlsstate
* remove controlsState migration
CoS.initialized isn't needed yet
* fix
* flip!
* bump
* fix that
* update refs
* fix
* if canValid goes false, controlsd would still send
* bump
* rm diff
* need to be very careful with initializing
* update refs
old-commit-hash: 71f5c441fe
* rename function
* make a wrapper function (ford uses dynamic up/down limits
* make two functions consistent
* make torque function convert to int
old-commit-hash: 581fd62d26
* draft
* bump opendbc
* still draft
* that's not right
* superset of the changes, 33hz
* cleanup
* this should work
* remove line
* pass it in again
* actually no need to check updated now
* now_nanos
* consistent name
* fix replay
* one line isn't that bad
switch
switch
* fix CarController tests
* Update ref_commit
old-commit-hash: 8f5057ff2d
* stash
* more test
* less test
* clean test
* no angle
* add tolerance
* fix gm
fix gm
* test both
* lower some rates on hkg
* stash
* simpler
* bump panda
* Revert "bump panda"
This reverts commit f2137c2211.
* only torque
* make kona pass
* duplicate __init__
* move
* half clean up
* half clean up
* more clean up
* more clean up
* fix static analysis
* calculate over 0.5 seconds
* limit to max steer
* type annotation
* calc once
old-commit-hash: aab33b1c5f
* torque control again
* 3mss per s
* no bad sensors
* tweaks
* Need more checks before we can do this
* update refs
* only ram for now
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
old-commit-hash: bdfaa1d1ee
* RamInit
* bump submodules
* lil cleanup
* clean up carstate formatting and platform grouping
make tuple
* give it a gold torque star (looks around 2.4 from rough data)
* Dasm Fault
* bump panda
* more cleanup
* cleanup car state
* more cleanup
* some fixes
* remove more stuff
* fix angle signal scaling and fix lkas control bit
* bump panda
* update those
* same limits as pacifica
* cleanup hud alert building
* better fault logic
* fix rate
* set ahb
* bring that back
* update refs
Co-authored-by: Jonathan <jraycec@gmail.com>
Co-authored-by: Shane Smiskol <shane@smiskol.com>
Co-authored-by: Comma Device <device@comma.ai>
old-commit-hash: 9b0acacf5e
* clean up
* max range is 15
* use wheel buttons counter and clean up
* no
* try spamming 10 times with next counter value
* try 50 hz
* this is dead code
* revert behavior changes, just clean up
* revert more
* also that
* no multiline can creation
* sort imports
old-commit-hash: 3f0b06b16e
These models need to turn off gone_fast_yet bit at -3 to avoid LKAS
faults.
This was likely an accidental omission from PR #1297
To avoid future similar mistakes, we could define a list of these cars
in values.py instead of having the list in multiple places.
old-commit-hash: 01f20229cb
* don't need individual prev state vars since whole CS is copied
* don't need a whole function since toyota alerts were simplified
* better here
* abstract pcmEnable/pcmDisable events
* the flippening came to NEOS
* delete
* unused
* Revert "the flippening came to NEOS"
This reverts commit 91cfb73b29.
old-commit-hash: 8d791d78dd
* Before abstraction, adding speed init from VW as well
* strting to abstract carstate class
* fix bug and update lock?
* revert pipfile change
* another bug
* fix linter
* bug fix
* remove a bunch of diplicated kf code
* better to not have class vars. will abstract __init__ anyway later
* abstract common instance vars in carstate init and a generic gear parser static method
* abstract gear parser for chrysler
* abstract gm gear parser too
* remove unnecessary random vars
* Chrysler: carstate returns capnp struct directly
* revert ref commit
* test ref
* ops, missed this conflict
* not sure why this got deleted
* no need to copy
* remove copy import
Co-authored-by: Willem Melching <willem.melching@gmail.com>
old-commit-hash: 703eb511da
* support for Chrysler Pacifica 2020 Hybrid
Thanks to Benson in Discord.
Example segment: 8190c7275a24557b|2020-01-29--08-33-58--7
* Add relevant route to selfdrive/test/test_car_models.py
* fix segment test name
old-commit-hash: 5aff2b6885
* 2019 Chrysler Pacfica and 2019 Jeep Grand Cherokee support, along with likely support for arbitrary models.
This is done by copying most values from the stock LKAS camera which is active with https://github.com/commaai/panda/pull/177
* No longer send LKAS_HEARTBIT because Panda now forwards it for us.
* Pacifica Hybrid 2018 combine fingerprints, add 808: 8
* panda chrysler: forward bus 0 to bus 2
copy of Panda commit: 1049502644
old-commit-hash: 1efa3f0eba
Shane Smiskol
Dean Lee
Justin Newberry
Jason Wen
Adeeb Shihadeh
HaraldSchafer
realfast
Willem Melching
qadmus
Drew Hintz
Adeeb
rbiasini
George Hotz
Vehicle Researcher
Drew Hintz
Nigel Armstrong