* check_most_messages_valid impl
* Add to both regen and test_processes
* Refactor
* Bring back carOutput
* Use Counter
* Use get(k, 0)
old-commit-hash: e0d20d2cf3
* format card
* standalone process
* no class member CS, there's no point
also can be confusing; what else could be using this?
* rename CoS
* Update selfdrive/controls/controlsd.py
* never works first time :D
* canRcvTimeout is bool
* hack
* add cpu
* see what testing closet comes up with
* first
* some clean up
* support passable CI, fix test models
* fix startup alert
* process replay changes
* test_fuzzy
* gate carOutput valid on carControl valid
* we should publish after we update carOutput
* controlsd was using actuatorsOutput from 2 frames ago for torque, not the most up to date
* check all checks for carControl in case controlsd dies
* log more timestamps
* more generic latency logger; needs some clean up
latency_logger.py was difficult to understand and modify
* card polls on can and carControl to get latest carControl possible
* temp try to send earlier
* add log
* remove latencylogger
* no mpld3!
* old loop
* detect first event
* normal send
* revert "card polls on can and carControl to get latest carControl possible"
how it was is best
* sheesh! update should be first
* first timestamp
* temp comment ( timestamp is slow :( )
* more final ordering, and make polling on/off test repeatable
* Received can
* new plot timestamps
* clean up
* no poll
* add controllers (draft)
* Revert "add controllers (draft)"
This reverts commit e2c3f01b2f.
* fix that
* conventions
* just use CS
* consider controlsd state machine in card: not fully done
* hmm it's just becoming controlsd
* rm debugging
* Revert "hmm it's just becoming controlsd"
This reverts commit 534a357ee9.
* Revert "just use CS"
This reverts commit 9fa7406f30.
* add vCruise
* migrate car state
* Revert "migrate car state"
This reverts commit 4ae86ca163.
* Revert "add vCruise"
This reverts commit af247a8da4.
* simple state machine in card (doesn't work as is)
* Revert "simple state machine in card (doesn't work as is)"
This reverts commit b4af8a9b0a.
* poll carState without conflate
* bump
* remove state transition
* fix
* update refs
* ignore cumLagMs and don't ignore valid
* fix controls mismatch; controlsd used to set alt exp
* controlsd_config_callback not needed for card
* revert ref temp
* update refs
* no poll
* not builder!
* test fix
* need to migrate initialized
* CC will be a reader
* more as_reader!
* fix None
* init after publish like before - no real difference
* controlsd clean up
* remove redundant check and check passive for init
* stash
* flip
* migrate missing carOutput for controlsd
* Update ref_commit
* bump cereal
* comment
* no class params
* no class
* Revert "no class"
This reverts commit 5499b83c2d.
* add todo
* regen and update refs
* fix
* update refs
* and fix that
* should be controlsstate
* remove controlsState migration
CoS.initialized isn't needed yet
* fix
* flip!
* bump
* fix that
* update refs
* fix
* if canValid goes false, controlsd would still send
* bump
* rm diff
* need to be very careful with initializing
* update refs
old-commit-hash: 71f5c441fe
* regen
* regen
* update
* undo
* update refs
* fix
* real fix
* test
* test2
* test3
* stash
* Revert "stash"
This reverts commit bf6765f526.
* rk.lagging can not be trusted. BODY segment has radarFault while modelV2 is not valid, causing radarState to not be valid
* order
* update refs again
* we never logged carOutput!
* bump
* add back checks
old-commit-hash: 220fcc1675
* Update joystick mode in step
* Stop putting the body in joystick mode by default
* Toggle JoystickDebugMode by default for notCars in process_replay
* Remove subsection about web joystick
* Update param only in non-cars
* Make joystickDebug non-static event, and add it in a loop
* Add comment
old-commit-hash: e62756596b
* remove separate previous route carparams from each daemon and add centrally to controlsd
* extract out sigint handler
* make process replay work for torqued
* don't write param if None
old-commit-hash: 2eb487c9a5
* Migrate pandaStates
* Fix import
* Make pandaStates migration optional, so process_replay still works on logs without carParams
* peripheralState migration if its not available
* Do nothing if log file has peripheralStates
* Add migrate_managerState
---------
Co-authored-by: Shane Smiskol <shane@smiskol.com>
old-commit-hash: 898acb13f2
* Fix assertion for vision_pubs
* Get camera states from meta
* Convert deviceType to string
* Use neo instead of eon for frame sizes dict
* update vision_pubs of process config when creating vipc
old-commit-hash: 9c5bbe1a91
* pytest: use a clean environment for all tests
* rm that
* fix pj
* put build back
* fix params
* fix that
* handle no key
* that was removed
---------
Co-authored-by: Justin Newberry <justin@comma.ai>
old-commit-hash: 7b6afbc162
* use_laika
* Update test
* fix spacing
* fix proc replay
* small fix
* Try correct std
* cast correctly
* experimental
* simpler
* update reset thresholds
* improve
* Ready for live running
* outlier reject
* update laika
* add fine speeds
* more experiments
* fixes
* all in laika
* more small tweaks
* outlier rejection not needed
* fix conflict
* no more gpslocation
* update test
* refactor to laika
* runs again
* Update ref
old-commit-hash: fd3b8a3d75
* radard: tie radard frequency to modelV2
Accumulate parsed messages until state is updated (toyota)
Same for honda
Rename rr to something more descriptive
* Change _update method name, since signature has changed
* Update ref commit
* Some renames
* Check for number of cans
old-commit-hash: 460f5c8e0b
* enable flake8-builtins
* replace any with contains
* fix typo in pack
* fix type
* format is from the parent module, has to be enabled
* item_id
* fix item_id
* disable for id since that's what the remote server returns
old-commit-hash: 8793cbff40
* Add ProcessOutputProxy
* Move launcher to its own field
* Move ProcessOutputCapture to its own file
* Return itself from __enter__ of OpenpilotPrefix
* Integrate ProcessOutputCapture into process_replay
* Add note about capture_output_store to README
* ipykernel import is optional
* Disable type checking for link_with_current_proc
* Remove assertion
* Decode outputs to utf-8
* read(self): return empty buf if its none
* Fix type annotations
* Replace fifo with regular file, to avoid hitting fifo size limit
old-commit-hash: 547a033a3c
* first working ProcessContainer and _replay_multi_process implementation
* Setup controlsd config_callback
* Add vision ipc support
* Remove old code
* add todo
* Update estimated processing times
* Use deepcopy when getting configs
* Rework the API to support passing multiple names or configs
* Add get_custom_params_from_lr
* Add more typing
* Enable simulation for controlsd
* Fix typing issues
* Regen refactor
* Fix linter issues
* Make wideRoadCameraState optional
* Move DummySocket to helpers
* Improve typing in regen
* Minor improvements
* Maintain sort order of internal_pub_queue using heapq
* Move ProcessContainer elsewhere
* Fix internal heap
* Change comment
* Remove subtest_name from ProcessConfig
* Update cereal
* Add newline
old-commit-hash: b2d0f74ec3
* Support for simulation flag while replay
* Update cereal
* Enable simulation for controlsd
* Update ref commit
* Update cereal
old-commit-hash: 72579a0e10
* vipc support. modeld and dmonitoringmodeld configs
* Update cereal
* Add vision meta
* Use vision meta in process replay
* Exclude modeld and dmonitoringmodeld from test_processes
* Refactor other pieces of code to use vision meta
* remove unnecessary imports
* Add MAX_FRAMES_PER_SEGMENT
* cameraState migration
* Move camera state migration to migration module
* model_replay refactor
* Fix lint issues
* Reduce number of vipc buffers to 2
* Update spinner message
* Update model replay ref
* Support the new log order
* Replace CameraFrameSizes with dict. Add encode_index field
* Migrate camera states based on encode indices
* Refactor process replay
* Refactor model replay
* Remove unnecessary print
* Update model replay ref
* Make camera state migration optional
* Remove unused import
* Add ignore_alive_pubs field
* Add assertion for carParams inside fingerprinting callback
* Remove WideCameraOnly param setup
* Refactor ModeldCameraSyncRcvCallback
* Update model replay ref commit
* Fix camera state migration
* Only migrate camera states when process has vision pubs
* Refactor model replay again
* Fix linter issues
* One more linter fix
* Update model replay ref commit
old-commit-hash: 2c617e0c7a
Harald Schäfer
Adeeb Shihadeh
Kacper Rączy
ZwX1616
Shane Smiskol
Cameron Clough
Vivek Aithal
Justin Newberry
Dean Lee