// ///////////////////// //
// Black Panda + Harness //
// ///////////////////// //

void black_enable_can_transciever(uint8_t transciever, bool enabled) {
  switch (transciever){
    case 1U:
      set_gpio_output(GPIOC, 1, !enabled);
      break;
    case 2U:
      set_gpio_output(GPIOC, 13, !enabled);
      break;
    case 3U:
      set_gpio_output(GPIOA, 0, !enabled);
      break;
    case 4U:
      set_gpio_output(GPIOB, 10, !enabled);
      break;
    default:
      puts("Invalid CAN transciever ("); puth(transciever); puts("): enabling failed\n");
      break;
  }
}

void black_enable_can_transcievers(bool enabled) {
  for(uint8_t i=1U; i<=4U; i++){
    black_enable_can_transciever(i, enabled);
  }
}

void black_set_led(uint8_t color, bool enabled) {
  switch (color){
    case LED_RED:
      set_gpio_output(GPIOC, 9, !enabled);
      break;
     case LED_GREEN:
      set_gpio_output(GPIOC, 7, !enabled);
      break;
    case LED_BLUE:
      set_gpio_output(GPIOC, 6, !enabled);
      break;
    default:
      break;
  }
}

void black_set_gps_load_switch(bool enabled) {
  set_gpio_output(GPIOC, 12, enabled);
}

void black_set_usb_load_switch(bool enabled) {
  set_gpio_output(GPIOB, 1, !enabled);
}

void black_set_usb_power_mode(uint8_t mode) {
  bool valid = false;
  switch (mode) {
    case USB_POWER_CLIENT:
      black_set_usb_load_switch(false);
      valid = true;
      break;
    case USB_POWER_CDP:
      black_set_usb_load_switch(true);
      valid = true;
      break;
    default:
      puts("Invalid USB power mode\n");
      break;
  }
  if (valid) {
    usb_power_mode = mode;
  }
}

void black_set_esp_gps_mode(uint8_t mode) {
  switch (mode) {
    case ESP_GPS_DISABLED:
      // GPS OFF
      set_gpio_output(GPIOC, 14, 0);
      set_gpio_output(GPIOC, 5, 0);
      break;
    case ESP_GPS_ENABLED:
      // GPS ON
      set_gpio_output(GPIOC, 14, 1);
      set_gpio_output(GPIOC, 5, 1);
      break;
    case ESP_GPS_BOOTMODE:
      set_gpio_output(GPIOC, 14, 1);
      set_gpio_output(GPIOC, 5, 0);
      break;
    default:
      puts("Invalid ESP/GPS mode\n");
      break;
  }
}

void black_set_can_mode(uint8_t mode){
  switch (mode) {
    case CAN_MODE_NORMAL:
    case CAN_MODE_OBD_CAN2:
      if ((bool)(mode == CAN_MODE_NORMAL) != (bool)(car_harness_status == HARNESS_STATUS_NORMAL)) {
        // B12,B13: disable OBD mode
        set_gpio_mode(GPIOB, 12, MODE_INPUT);
        set_gpio_mode(GPIOB, 13, MODE_INPUT);

        // B5,B6: normal CAN2 mode
        set_gpio_alternate(GPIOB, 5, GPIO_AF9_CAN2);
        set_gpio_alternate(GPIOB, 6, GPIO_AF9_CAN2);
      } else {
        // B5,B6: disable normal CAN2 mode
        set_gpio_mode(GPIOB, 5, MODE_INPUT);
        set_gpio_mode(GPIOB, 6, MODE_INPUT);

        // B12,B13: OBD mode
        set_gpio_alternate(GPIOB, 12, GPIO_AF9_CAN2);
        set_gpio_alternate(GPIOB, 13, GPIO_AF9_CAN2);
      }
      break;
    default:
      puts("Tried to set unsupported CAN mode: "); puth(mode); puts("\n");
      break;
  }
}

void black_usb_power_mode_tick(uint64_t tcnt){
  UNUSED(tcnt);
  // Not applicable
}

bool black_check_ignition(void){
  // ignition is checked through harness
  return harness_check_ignition();
}

void black_init(void) {
  common_init_gpio();

  // A8,A15: normal CAN3 mode
  set_gpio_alternate(GPIOA, 8, GPIO_AF11_CAN3);
  set_gpio_alternate(GPIOA, 15, GPIO_AF11_CAN3);

  // C0: OBD_SBU1 (orientation detection)
  // C3: OBD_SBU2 (orientation detection)
  set_gpio_mode(GPIOC, 0, MODE_ANALOG);
  set_gpio_mode(GPIOC, 3, MODE_ANALOG);

  // C10: OBD_SBU1_RELAY (harness relay driving output)
  // C11: OBD_SBU2_RELAY (harness relay driving output)
  set_gpio_mode(GPIOC, 10, MODE_OUTPUT);
  set_gpio_mode(GPIOC, 11, MODE_OUTPUT);
  set_gpio_output_type(GPIOC, 10, OUTPUT_TYPE_OPEN_DRAIN);
  set_gpio_output_type(GPIOC, 11, OUTPUT_TYPE_OPEN_DRAIN);
  set_gpio_output(GPIOC, 10, 1);
  set_gpio_output(GPIOC, 11, 1);

  // C8: FAN aka TIM3_CH3
  set_gpio_alternate(GPIOC, 8, GPIO_AF2_TIM3);

  // Turn on GPS load switch.
  black_set_gps_load_switch(true);

  // Turn on USB load switch.
  black_set_usb_load_switch(true);

  // Set right power mode
  black_set_usb_power_mode(USB_POWER_CDP);

  // Initialize harness
  harness_init();

  // Enable CAN transcievers
  black_enable_can_transcievers(true);

  // Disable LEDs
  black_set_led(LED_RED, false);
  black_set_led(LED_GREEN, false);
  black_set_led(LED_BLUE, false);

  // Set normal CAN mode
  black_set_can_mode(CAN_MODE_NORMAL);

  // flip CAN0 and CAN2 if we are flipped
  if (car_harness_status == HARNESS_STATUS_NORMAL) {
    can_flip_buses(0, 2);
  }

  // init multiplexer
  can_set_obd(car_harness_status, false);
}

const harness_configuration black_harness_config = {
  .has_harness = true,
  .GPIO_SBU1 = GPIOC,
  .GPIO_SBU2 = GPIOC,
  .GPIO_relay_normal = GPIOC,
  .GPIO_relay_flipped = GPIOC,
  .pin_SBU1 = 0,
  .pin_SBU2 = 3,
  .pin_relay_normal = 10,
  .pin_relay_flipped = 11,
  .adc_channel_SBU1 = 10,
  .adc_channel_SBU2 = 13
};

const board board_black = {
  .board_type = "Black",
  .harness_config = &black_harness_config,
  .init = black_init,
  .enable_can_transciever = black_enable_can_transciever,
  .enable_can_transcievers = black_enable_can_transcievers,
  .set_led = black_set_led,
  .set_usb_power_mode = black_set_usb_power_mode,
  .set_esp_gps_mode = black_set_esp_gps_mode,
  .set_can_mode = black_set_can_mode,
  .usb_power_mode_tick = black_usb_power_mode_tick,
  .check_ignition = black_check_ignition
};