openpilot is an open source driver assistance system. openpilot performs the functions of Automated Lane Centering and Adaptive Cruise Control for over 200 supported car makes and models.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

45 lines
1.7 KiB

// ///////////////////////////////////////////////////////////// //
// Hardware abstraction layer for all different supported boards //
// ///////////////////////////////////////////////////////////// //
#include "boards/board_declarations.h"
#include "boards/unused_funcs.h"
// ///// Board definition and detection ///// //
#include "stm32f4/lladc.h"
#include "drivers/harness.h"
#include "drivers/fan.h"
#include "stm32f4/llfan.h"
#include "drivers/clock_source.h"
#include "boards/white.h"
#include "boards/grey.h"
#include "boards/black.h"
#include "boards/uno.h"
#include "boards/dos.h"
// Unused functions on F4
void sound_tick(void) {}
void detect_board_type(void) {
// SPI lines floating: white (TODO: is this reliable? Not really, we have to enable ESP/GPS to be able to detect this on the UART)
set_gpio_output(GPIOC, 14, 1);
set_gpio_output(GPIOC, 5, 1);
if(!detect_with_pull(GPIOB, 1, PULL_UP) && !detect_with_pull(GPIOB, 7, PULL_UP)){
hw_type = HW_TYPE_DOS;
current_board = &board_dos;
} else if((detect_with_pull(GPIOA, 4, PULL_DOWN)) || (detect_with_pull(GPIOA, 5, PULL_DOWN)) || (detect_with_pull(GPIOA, 6, PULL_DOWN)) || (detect_with_pull(GPIOA, 7, PULL_DOWN))){
hw_type = HW_TYPE_WHITE_PANDA;
current_board = &board_white;
} else if(detect_with_pull(GPIOA, 13, PULL_DOWN)) { // Rev AB deprecated, so no pullup means black. In REV C, A13 is pulled up to 5V with a 10K
hw_type = HW_TYPE_GREY_PANDA;
current_board = &board_grey;
} else if(!detect_with_pull(GPIOB, 15, PULL_UP)) {
hw_type = HW_TYPE_UNO;
current_board = &board_uno;
} else {
hw_type = HW_TYPE_BLACK_PANDA;
current_board = &board_black;
}
// Return A13 to the alt mode to fix SWD
set_gpio_alternate(GPIOA, 13, GPIO_AF0_SWJ);
}