You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
195 lines
8.3 KiB
195 lines
8.3 KiB
from cereal import car
|
|
from common.numpy_fast import mean
|
|
from opendbc.can.can_define import CANDefine
|
|
from selfdrive.car.interfaces import CarStateBase
|
|
from opendbc.can.parser import CANParser
|
|
from selfdrive.config import Conversions as CV
|
|
from selfdrive.car.toyota.values import CAR, DBC, STEER_THRESHOLD, TSS2_CAR, NO_STOP_TIMER_CAR
|
|
|
|
|
|
class CarState(CarStateBase):
|
|
def __init__(self, CP):
|
|
super().__init__(CP)
|
|
can_define = CANDefine(DBC[CP.carFingerprint]['pt'])
|
|
self.shifter_values = can_define.dv["GEAR_PACKET"]['GEAR']
|
|
|
|
# All TSS2 car have the accurate sensor
|
|
self.accurate_steer_angle_seen = CP.carFingerprint in TSS2_CAR
|
|
|
|
# On cars with cp.vl["STEER_TORQUE_SENSOR"]['STEER_ANGLE']
|
|
# the signal is zeroed to where the steering angle is at start.
|
|
# Need to apply an offset as soon as the steering angle measurements are both received
|
|
self.needs_angle_offset = True
|
|
self.angle_offset = 0.
|
|
|
|
def update(self, cp, cp_cam):
|
|
ret = car.CarState.new_message()
|
|
|
|
ret.doorOpen = any([cp.vl["SEATS_DOORS"]['DOOR_OPEN_FL'], cp.vl["SEATS_DOORS"]['DOOR_OPEN_FR'],
|
|
cp.vl["SEATS_DOORS"]['DOOR_OPEN_RL'], cp.vl["SEATS_DOORS"]['DOOR_OPEN_RR']])
|
|
ret.seatbeltUnlatched = cp.vl["SEATS_DOORS"]['SEATBELT_DRIVER_UNLATCHED'] != 0
|
|
|
|
ret.brakePressed = cp.vl["BRAKE_MODULE"]['BRAKE_PRESSED'] != 0
|
|
ret.brakeLights = bool(cp.vl["ESP_CONTROL"]['BRAKE_LIGHTS_ACC'] or ret.brakePressed)
|
|
if self.CP.enableGasInterceptor:
|
|
ret.gas = (cp.vl["GAS_SENSOR"]['INTERCEPTOR_GAS'] + cp.vl["GAS_SENSOR"]['INTERCEPTOR_GAS2']) / 2.
|
|
ret.gasPressed = ret.gas > 15
|
|
else:
|
|
ret.gas = cp.vl["GAS_PEDAL"]['GAS_PEDAL']
|
|
ret.gasPressed = cp.vl["PCM_CRUISE"]['GAS_RELEASED'] == 0
|
|
|
|
ret.wheelSpeeds.fl = cp.vl["WHEEL_SPEEDS"]['WHEEL_SPEED_FL'] * CV.KPH_TO_MS
|
|
ret.wheelSpeeds.fr = cp.vl["WHEEL_SPEEDS"]['WHEEL_SPEED_FR'] * CV.KPH_TO_MS
|
|
ret.wheelSpeeds.rl = cp.vl["WHEEL_SPEEDS"]['WHEEL_SPEED_RL'] * CV.KPH_TO_MS
|
|
ret.wheelSpeeds.rr = cp.vl["WHEEL_SPEEDS"]['WHEEL_SPEED_RR'] * CV.KPH_TO_MS
|
|
ret.vEgoRaw = mean([ret.wheelSpeeds.fl, ret.wheelSpeeds.fr, ret.wheelSpeeds.rl, ret.wheelSpeeds.rr])
|
|
ret.vEgo, ret.aEgo = self.update_speed_kf(ret.vEgoRaw)
|
|
|
|
ret.standstill = ret.vEgoRaw < 0.001
|
|
|
|
# Some newer models have a more accurate angle measurement in the TORQUE_SENSOR message. Use if non-zero
|
|
if abs(cp.vl["STEER_TORQUE_SENSOR"]['STEER_ANGLE']) > 1e-3:
|
|
self.accurate_steer_angle_seen = True
|
|
|
|
if self.accurate_steer_angle_seen:
|
|
ret.steeringAngleDeg = cp.vl["STEER_TORQUE_SENSOR"]['STEER_ANGLE'] - self.angle_offset
|
|
|
|
if self.needs_angle_offset:
|
|
angle_wheel = cp.vl["STEER_ANGLE_SENSOR"]['STEER_ANGLE'] + cp.vl["STEER_ANGLE_SENSOR"]['STEER_FRACTION']
|
|
if abs(angle_wheel) > 1e-3 and abs(ret.steeringAngleDeg) > 1e-3:
|
|
self.needs_angle_offset = False
|
|
self.angle_offset = ret.steeringAngleDeg - angle_wheel
|
|
else:
|
|
ret.steeringAngleDeg = cp.vl["STEER_ANGLE_SENSOR"]['STEER_ANGLE'] + cp.vl["STEER_ANGLE_SENSOR"]['STEER_FRACTION']
|
|
|
|
ret.steeringRateDeg = cp.vl["STEER_ANGLE_SENSOR"]['STEER_RATE']
|
|
|
|
can_gear = int(cp.vl["GEAR_PACKET"]['GEAR'])
|
|
ret.gearShifter = self.parse_gear_shifter(self.shifter_values.get(can_gear, None))
|
|
ret.leftBlinker = cp.vl["STEERING_LEVERS"]['TURN_SIGNALS'] == 1
|
|
ret.rightBlinker = cp.vl["STEERING_LEVERS"]['TURN_SIGNALS'] == 2
|
|
|
|
ret.steeringTorque = cp.vl["STEER_TORQUE_SENSOR"]['STEER_TORQUE_DRIVER']
|
|
ret.steeringTorqueEps = cp.vl["STEER_TORQUE_SENSOR"]['STEER_TORQUE_EPS']
|
|
# we could use the override bit from dbc, but it's triggered at too high torque values
|
|
ret.steeringPressed = abs(ret.steeringTorque) > STEER_THRESHOLD
|
|
ret.steerWarning = cp.vl["EPS_STATUS"]['LKA_STATE'] not in [1, 5]
|
|
|
|
if self.CP.carFingerprint == CAR.LEXUS_IS:
|
|
ret.cruiseState.available = cp.vl["DSU_CRUISE"]['MAIN_ON'] != 0
|
|
ret.cruiseState.speed = cp.vl["DSU_CRUISE"]['SET_SPEED'] * CV.KPH_TO_MS
|
|
self.low_speed_lockout = False
|
|
else:
|
|
ret.cruiseState.available = cp.vl["PCM_CRUISE_2"]['MAIN_ON'] != 0
|
|
ret.cruiseState.speed = cp.vl["PCM_CRUISE_2"]['SET_SPEED'] * CV.KPH_TO_MS
|
|
self.low_speed_lockout = cp.vl["PCM_CRUISE_2"]['LOW_SPEED_LOCKOUT'] == 2
|
|
self.pcm_acc_status = cp.vl["PCM_CRUISE"]['CRUISE_STATE']
|
|
if self.CP.carFingerprint in NO_STOP_TIMER_CAR or self.CP.enableGasInterceptor:
|
|
# ignore standstill in hybrid vehicles, since pcm allows to restart without
|
|
# receiving any special command. Also if interceptor is detected
|
|
ret.cruiseState.standstill = False
|
|
else:
|
|
ret.cruiseState.standstill = self.pcm_acc_status == 7
|
|
ret.cruiseState.enabled = bool(cp.vl["PCM_CRUISE"]['CRUISE_ACTIVE'])
|
|
ret.cruiseState.nonAdaptive = cp.vl["PCM_CRUISE"]['CRUISE_STATE'] in [1, 2, 3, 4, 5, 6]
|
|
|
|
if self.CP.carFingerprint == CAR.PRIUS:
|
|
ret.genericToggle = cp.vl["AUTOPARK_STATUS"]['STATE'] != 0
|
|
else:
|
|
ret.genericToggle = bool(cp.vl["LIGHT_STALK"]['AUTO_HIGH_BEAM'])
|
|
ret.stockAeb = bool(cp_cam.vl["PRE_COLLISION"]["PRECOLLISION_ACTIVE"] and cp_cam.vl["PRE_COLLISION"]["FORCE"] < -1e-5)
|
|
|
|
ret.espDisabled = cp.vl["ESP_CONTROL"]['TC_DISABLED'] != 0
|
|
# 2 is standby, 10 is active. TODO: check that everything else is really a faulty state
|
|
self.steer_state = cp.vl["EPS_STATUS"]['LKA_STATE']
|
|
|
|
if self.CP.carFingerprint in TSS2_CAR:
|
|
ret.leftBlindspot = (cp.vl["BSM"]['L_ADJACENT'] == 1) or (cp.vl["BSM"]['L_APPROACHING'] == 1)
|
|
ret.rightBlindspot = (cp.vl["BSM"]['R_ADJACENT'] == 1) or (cp.vl["BSM"]['R_APPROACHING'] == 1)
|
|
|
|
return ret
|
|
|
|
@staticmethod
|
|
def get_can_parser(CP):
|
|
|
|
signals = [
|
|
# sig_name, sig_address, default
|
|
("STEER_ANGLE", "STEER_ANGLE_SENSOR", 0),
|
|
("GEAR", "GEAR_PACKET", 0),
|
|
("BRAKE_PRESSED", "BRAKE_MODULE", 0),
|
|
("GAS_PEDAL", "GAS_PEDAL", 0),
|
|
("WHEEL_SPEED_FL", "WHEEL_SPEEDS", 0),
|
|
("WHEEL_SPEED_FR", "WHEEL_SPEEDS", 0),
|
|
("WHEEL_SPEED_RL", "WHEEL_SPEEDS", 0),
|
|
("WHEEL_SPEED_RR", "WHEEL_SPEEDS", 0),
|
|
("DOOR_OPEN_FL", "SEATS_DOORS", 1),
|
|
("DOOR_OPEN_FR", "SEATS_DOORS", 1),
|
|
("DOOR_OPEN_RL", "SEATS_DOORS", 1),
|
|
("DOOR_OPEN_RR", "SEATS_DOORS", 1),
|
|
("SEATBELT_DRIVER_UNLATCHED", "SEATS_DOORS", 1),
|
|
("TC_DISABLED", "ESP_CONTROL", 1),
|
|
("STEER_FRACTION", "STEER_ANGLE_SENSOR", 0),
|
|
("STEER_RATE", "STEER_ANGLE_SENSOR", 0),
|
|
("CRUISE_ACTIVE", "PCM_CRUISE", 0),
|
|
("CRUISE_STATE", "PCM_CRUISE", 0),
|
|
("GAS_RELEASED", "PCM_CRUISE", 1),
|
|
("STEER_TORQUE_DRIVER", "STEER_TORQUE_SENSOR", 0),
|
|
("STEER_TORQUE_EPS", "STEER_TORQUE_SENSOR", 0),
|
|
("STEER_ANGLE", "STEER_TORQUE_SENSOR", 0),
|
|
("TURN_SIGNALS", "STEERING_LEVERS", 3), # 3 is no blinkers
|
|
("LKA_STATE", "EPS_STATUS", 0),
|
|
("BRAKE_LIGHTS_ACC", "ESP_CONTROL", 0),
|
|
("AUTO_HIGH_BEAM", "LIGHT_STALK", 0),
|
|
]
|
|
|
|
checks = [
|
|
("BRAKE_MODULE", 40),
|
|
("GAS_PEDAL", 33),
|
|
("WHEEL_SPEEDS", 80),
|
|
("STEER_ANGLE_SENSOR", 80),
|
|
("PCM_CRUISE", 33),
|
|
("STEER_TORQUE_SENSOR", 50),
|
|
("EPS_STATUS", 25),
|
|
]
|
|
|
|
if CP.carFingerprint == CAR.LEXUS_IS:
|
|
signals.append(("MAIN_ON", "DSU_CRUISE", 0))
|
|
signals.append(("SET_SPEED", "DSU_CRUISE", 0))
|
|
checks.append(("DSU_CRUISE", 5))
|
|
else:
|
|
signals.append(("MAIN_ON", "PCM_CRUISE_2", 0))
|
|
signals.append(("SET_SPEED", "PCM_CRUISE_2", 0))
|
|
signals.append(("LOW_SPEED_LOCKOUT", "PCM_CRUISE_2", 0))
|
|
checks.append(("PCM_CRUISE_2", 33))
|
|
|
|
if CP.carFingerprint == CAR.PRIUS:
|
|
signals += [("STATE", "AUTOPARK_STATUS", 0)]
|
|
|
|
# add gas interceptor reading if we are using it
|
|
if CP.enableGasInterceptor:
|
|
signals.append(("INTERCEPTOR_GAS", "GAS_SENSOR", 0))
|
|
signals.append(("INTERCEPTOR_GAS2", "GAS_SENSOR", 0))
|
|
checks.append(("GAS_SENSOR", 50))
|
|
|
|
if CP.carFingerprint in TSS2_CAR:
|
|
signals += [("L_ADJACENT", "BSM", 0)]
|
|
signals += [("L_APPROACHING", "BSM", 0)]
|
|
signals += [("R_ADJACENT", "BSM", 0)]
|
|
signals += [("R_APPROACHING", "BSM", 0)]
|
|
|
|
return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 0)
|
|
|
|
@staticmethod
|
|
def get_cam_can_parser(CP):
|
|
|
|
signals = [
|
|
("FORCE", "PRE_COLLISION", 0),
|
|
("PRECOLLISION_ACTIVE", "PRE_COLLISION", 0)
|
|
]
|
|
|
|
# use steering message to check if panda is connected to frc
|
|
checks = [
|
|
("STEERING_LKA", 42)
|
|
]
|
|
|
|
return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 2)
|
|
|