You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
256 lines
8.6 KiB
256 lines
8.6 KiB
#include "bmx055_magn.h"
|
|
|
|
#include <unistd.h>
|
|
|
|
#include <algorithm>
|
|
#include <cassert>
|
|
#include <cstdio>
|
|
|
|
#include "common/swaglog.h"
|
|
#include "common/util.h"
|
|
|
|
static int16_t compensate_x(trim_data_t trim_data, int16_t mag_data_x, uint16_t data_rhall) {
|
|
uint16_t process_comp_x0 = data_rhall;
|
|
int32_t process_comp_x1 = ((int32_t)trim_data.dig_xyz1) * 16384;
|
|
uint16_t process_comp_x2 = ((uint16_t)(process_comp_x1 / process_comp_x0)) - ((uint16_t)0x4000);
|
|
int16_t retval = ((int16_t)process_comp_x2);
|
|
int32_t process_comp_x3 = (((int32_t)retval) * ((int32_t)retval));
|
|
int32_t process_comp_x4 = (((int32_t)trim_data.dig_xy2) * (process_comp_x3 / 128));
|
|
int32_t process_comp_x5 = (int32_t)(((int16_t)trim_data.dig_xy1) * 128);
|
|
int32_t process_comp_x6 = ((int32_t)retval) * process_comp_x5;
|
|
int32_t process_comp_x7 = (((process_comp_x4 + process_comp_x6) / 512) + ((int32_t)0x100000));
|
|
int32_t process_comp_x8 = ((int32_t)(((int16_t)trim_data.dig_x2) + ((int16_t)0xA0)));
|
|
int32_t process_comp_x9 = ((process_comp_x7 * process_comp_x8) / 4096);
|
|
int32_t process_comp_x10 = ((int32_t)mag_data_x) * process_comp_x9;
|
|
retval = ((int16_t)(process_comp_x10 / 8192));
|
|
retval = (retval + (((int16_t)trim_data.dig_x1) * 8)) / 16;
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int16_t compensate_y(trim_data_t trim_data, int16_t mag_data_y, uint16_t data_rhall) {
|
|
uint16_t process_comp_y0 = trim_data.dig_xyz1;
|
|
int32_t process_comp_y1 = (((int32_t)trim_data.dig_xyz1) * 16384) / process_comp_y0;
|
|
uint16_t process_comp_y2 = ((uint16_t)process_comp_y1) - ((uint16_t)0x4000);
|
|
int16_t retval = ((int16_t)process_comp_y2);
|
|
int32_t process_comp_y3 = ((int32_t) retval) * ((int32_t)retval);
|
|
int32_t process_comp_y4 = ((int32_t)trim_data.dig_xy2) * (process_comp_y3 / 128);
|
|
int32_t process_comp_y5 = ((int32_t)(((int16_t)trim_data.dig_xy1) * 128));
|
|
int32_t process_comp_y6 = ((process_comp_y4 + (((int32_t)retval) * process_comp_y5)) / 512);
|
|
int32_t process_comp_y7 = ((int32_t)(((int16_t)trim_data.dig_y2) + ((int16_t)0xA0)));
|
|
int32_t process_comp_y8 = (((process_comp_y6 + ((int32_t)0x100000)) * process_comp_y7) / 4096);
|
|
int32_t process_comp_y9 = (((int32_t)mag_data_y) * process_comp_y8);
|
|
retval = (int16_t)(process_comp_y9 / 8192);
|
|
retval = (retval + (((int16_t)trim_data.dig_y1) * 8)) / 16;
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int16_t compensate_z(trim_data_t trim_data, int16_t mag_data_z, uint16_t data_rhall) {
|
|
int16_t process_comp_z0 = ((int16_t)data_rhall) - ((int16_t) trim_data.dig_xyz1);
|
|
int32_t process_comp_z1 = (((int32_t)trim_data.dig_z3) * ((int32_t)(process_comp_z0))) / 4;
|
|
int32_t process_comp_z2 = (((int32_t)(mag_data_z - trim_data.dig_z4)) * 32768);
|
|
int32_t process_comp_z3 = ((int32_t)trim_data.dig_z1) * (((int16_t)data_rhall) * 2);
|
|
int16_t process_comp_z4 = (int16_t)((process_comp_z3 + (32768)) / 65536);
|
|
int32_t retval = ((process_comp_z2 - process_comp_z1) / (trim_data.dig_z2 + process_comp_z4));
|
|
|
|
/* saturate result to +/- 2 micro-tesla */
|
|
retval = std::clamp(retval, -32767, 32767);
|
|
|
|
/* Conversion of LSB to micro-tesla*/
|
|
retval = retval / 16;
|
|
|
|
return (int16_t)retval;
|
|
}
|
|
|
|
BMX055_Magn::BMX055_Magn(I2CBus *bus) : I2CSensor(bus) {}
|
|
|
|
int BMX055_Magn::init() {
|
|
uint8_t trim_x1y1[2] = {0};
|
|
uint8_t trim_x2y2[2] = {0};
|
|
uint8_t trim_xy1xy2[2] = {0};
|
|
uint8_t trim_z1[2] = {0};
|
|
uint8_t trim_z2[2] = {0};
|
|
uint8_t trim_z3[2] = {0};
|
|
uint8_t trim_z4[2] = {0};
|
|
uint8_t trim_xyz1[2] = {0};
|
|
|
|
// suspend -> sleep
|
|
int ret = set_register(BMX055_MAGN_I2C_REG_PWR_0, 0x01);
|
|
if(ret < 0) {
|
|
LOGE("Enabling power failed: %d", ret);
|
|
goto fail;
|
|
}
|
|
util::sleep_for(5); // wait until the chip is powered on
|
|
|
|
ret = verify_chip_id(BMX055_MAGN_I2C_REG_ID, {BMX055_MAGN_CHIP_ID});
|
|
if (ret == -1) {
|
|
goto fail;
|
|
}
|
|
|
|
// Load magnetometer trim
|
|
ret = read_register(BMX055_MAGN_I2C_REG_DIG_X1, trim_x1y1, 2);
|
|
if(ret < 0) goto fail;
|
|
ret = read_register(BMX055_MAGN_I2C_REG_DIG_X2, trim_x2y2, 2);
|
|
if(ret < 0) goto fail;
|
|
ret = read_register(BMX055_MAGN_I2C_REG_DIG_XY2, trim_xy1xy2, 2);
|
|
if(ret < 0) goto fail;
|
|
ret = read_register(BMX055_MAGN_I2C_REG_DIG_Z1_LSB, trim_z1, 2);
|
|
if(ret < 0) goto fail;
|
|
ret = read_register(BMX055_MAGN_I2C_REG_DIG_Z2_LSB, trim_z2, 2);
|
|
if(ret < 0) goto fail;
|
|
ret = read_register(BMX055_MAGN_I2C_REG_DIG_Z3_LSB, trim_z3, 2);
|
|
if(ret < 0) goto fail;
|
|
ret = read_register(BMX055_MAGN_I2C_REG_DIG_Z4_LSB, trim_z4, 2);
|
|
if(ret < 0) goto fail;
|
|
ret = read_register(BMX055_MAGN_I2C_REG_DIG_XYZ1_LSB, trim_xyz1, 2);
|
|
if(ret < 0) goto fail;
|
|
|
|
// Read trim data
|
|
trim_data.dig_x1 = trim_x1y1[0];
|
|
trim_data.dig_y1 = trim_x1y1[1];
|
|
|
|
trim_data.dig_x2 = trim_x2y2[0];
|
|
trim_data.dig_y2 = trim_x2y2[1];
|
|
|
|
trim_data.dig_xy1 = trim_xy1xy2[1]; // NB: MSB/LSB swapped
|
|
trim_data.dig_xy2 = trim_xy1xy2[0];
|
|
|
|
trim_data.dig_z1 = read_16_bit(trim_z1[0], trim_z1[1]);
|
|
trim_data.dig_z2 = read_16_bit(trim_z2[0], trim_z2[1]);
|
|
trim_data.dig_z3 = read_16_bit(trim_z3[0], trim_z3[1]);
|
|
trim_data.dig_z4 = read_16_bit(trim_z4[0], trim_z4[1]);
|
|
|
|
trim_data.dig_xyz1 = read_16_bit(trim_xyz1[0], trim_xyz1[1] & 0x7f);
|
|
assert(trim_data.dig_xyz1 != 0);
|
|
|
|
perform_self_test();
|
|
|
|
// f_max = 1 / (145us * nXY + 500us * NZ + 980us)
|
|
// Chose NXY = 7, NZ = 12, which gives 125 Hz,
|
|
// and has the same ratio as the high accuracy preset
|
|
ret = set_register(BMX055_MAGN_I2C_REG_REPXY, (7 - 1) / 2);
|
|
if (ret < 0) {
|
|
goto fail;
|
|
}
|
|
|
|
ret = set_register(BMX055_MAGN_I2C_REG_REPZ, 12 - 1);
|
|
if (ret < 0) {
|
|
goto fail;
|
|
}
|
|
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
return ret;
|
|
}
|
|
|
|
int BMX055_Magn::shutdown() {
|
|
// move to suspend mode
|
|
int ret = set_register(BMX055_MAGN_I2C_REG_PWR_0, 0);
|
|
if (ret < 0) {
|
|
LOGE("Could not move BMX055 MAGN in suspend mode!");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
bool BMX055_Magn::perform_self_test() {
|
|
uint8_t buffer[8];
|
|
int16_t x, y;
|
|
int16_t neg_z, pos_z;
|
|
|
|
// Increase z reps for less false positives (~30 Hz ODR)
|
|
set_register(BMX055_MAGN_I2C_REG_REPXY, 1);
|
|
set_register(BMX055_MAGN_I2C_REG_REPZ, 64 - 1);
|
|
|
|
// Clean existing measurement
|
|
read_register(BMX055_MAGN_I2C_REG_DATAX_LSB, buffer, sizeof(buffer));
|
|
|
|
uint8_t forced = BMX055_MAGN_FORCED;
|
|
|
|
// Negative current
|
|
set_register(BMX055_MAGN_I2C_REG_MAG, forced | (uint8_t(0b10) << 6));
|
|
util::sleep_for(100);
|
|
|
|
read_register(BMX055_MAGN_I2C_REG_DATAX_LSB, buffer, sizeof(buffer));
|
|
parse_xyz(buffer, &x, &y, &neg_z);
|
|
|
|
// Positive current
|
|
set_register(BMX055_MAGN_I2C_REG_MAG, forced | (uint8_t(0b11) << 6));
|
|
util::sleep_for(100);
|
|
|
|
read_register(BMX055_MAGN_I2C_REG_DATAX_LSB, buffer, sizeof(buffer));
|
|
parse_xyz(buffer, &x, &y, &pos_z);
|
|
|
|
// Put back in normal mode
|
|
set_register(BMX055_MAGN_I2C_REG_MAG, 0);
|
|
|
|
int16_t diff = pos_z - neg_z;
|
|
bool passed = (diff > 180) && (diff < 240);
|
|
|
|
if (!passed) {
|
|
LOGE("self test failed: neg %d pos %d diff %d", neg_z, pos_z, diff);
|
|
}
|
|
|
|
return passed;
|
|
}
|
|
|
|
bool BMX055_Magn::parse_xyz(uint8_t buffer[8], int16_t *x, int16_t *y, int16_t *z) {
|
|
bool ready = buffer[6] & 0x1;
|
|
if (ready) {
|
|
int16_t mdata_x = (int16_t) (((int16_t)buffer[1] << 8) | buffer[0]) >> 3;
|
|
int16_t mdata_y = (int16_t) (((int16_t)buffer[3] << 8) | buffer[2]) >> 3;
|
|
int16_t mdata_z = (int16_t) (((int16_t)buffer[5] << 8) | buffer[4]) >> 1;
|
|
uint16_t data_r = (uint16_t) (((uint16_t)buffer[7] << 8) | buffer[6]) >> 2;
|
|
assert(data_r != 0);
|
|
|
|
*x = compensate_x(trim_data, mdata_x, data_r);
|
|
*y = compensate_y(trim_data, mdata_y, data_r);
|
|
*z = compensate_z(trim_data, mdata_z, data_r);
|
|
}
|
|
return ready;
|
|
}
|
|
|
|
|
|
bool BMX055_Magn::get_event(MessageBuilder &msg, uint64_t ts) {
|
|
uint64_t start_time = nanos_since_boot();
|
|
uint8_t buffer[8];
|
|
int16_t _x, _y, x, y, z;
|
|
|
|
int len = read_register(BMX055_MAGN_I2C_REG_DATAX_LSB, buffer, sizeof(buffer));
|
|
assert(len == sizeof(buffer));
|
|
|
|
bool parsed = parse_xyz(buffer, &_x, &_y, &z);
|
|
if (parsed) {
|
|
|
|
auto event = msg.initEvent().initMagnetometer();
|
|
event.setSource(cereal::SensorEventData::SensorSource::BMX055);
|
|
event.setVersion(2);
|
|
event.setSensor(SENSOR_MAGNETOMETER_UNCALIBRATED);
|
|
event.setType(SENSOR_TYPE_MAGNETIC_FIELD_UNCALIBRATED);
|
|
event.setTimestamp(start_time);
|
|
|
|
// Move magnetometer into same reference frame as accel/gryo
|
|
x = -_y;
|
|
y = _x;
|
|
|
|
// Axis convention
|
|
x = -x;
|
|
y = -y;
|
|
|
|
float xyz[] = {(float)x, (float)y, (float)z};
|
|
auto svec = event.initMagneticUncalibrated();
|
|
svec.setV(xyz);
|
|
svec.setStatus(true);
|
|
}
|
|
|
|
// The BMX055 Magnetometer has no FIFO mode. Self running mode only goes
|
|
// up to 30 Hz. Therefore we put in forced mode, and request measurements
|
|
// at a 100 Hz. When reading the registers we have to check the ready bit
|
|
// To verify the measurement was completed this cycle.
|
|
set_register(BMX055_MAGN_I2C_REG_MAG, BMX055_MAGN_FORCED);
|
|
|
|
return parsed;
|
|
}
|
|
|