openpilot_comma/opendbc_repo/opendbc/car/mazda/carstate.py

from opendbc.can.can_define import CANDefine
from opendbc.can.parser import CANParser
from opendbc.car import Bus, create_button_events, structs
from opendbc.car.common.conversions import Conversions as CV
from opendbc.car.interfaces import CarStateBase
from opendbc.car.mazda.values import DBC, LKAS_LIMITS, MazdaFlags

ButtonType = structs.CarState.ButtonEvent.Type


class CarState(CarStateBase):
  def __init__(self, CP):
    super().__init__(CP)

    can_define = CANDefine(DBC[CP.carFingerprint][Bus.pt])
    self.shifter_values = can_define.dv["GEAR"]["GEAR"]

    self.crz_btns_counter = 0
    self.acc_active_last = False
    self.lkas_allowed_speed = False

    self.distance_button = 0

  def update(self, can_parsers) -> structs.CarState:
    cp = can_parsers[Bus.pt]
    cp_cam = can_parsers[Bus.cam]

    ret = structs.CarState()

    prev_distance_button = self.distance_button
    self.distance_button = cp.vl["CRZ_BTNS"]["DISTANCE_LESS"]

    ret.wheelSpeeds = self.get_wheel_speeds(
      cp.vl["WHEEL_SPEEDS"]["FL"],
      cp.vl["WHEEL_SPEEDS"]["FR"],
      cp.vl["WHEEL_SPEEDS"]["RL"],
      cp.vl["WHEEL_SPEEDS"]["RR"],
    )
    ret.vEgoRaw = (ret.wheelSpeeds.fl + ret.wheelSpeeds.fr + ret.wheelSpeeds.rl + ret.wheelSpeeds.rr) / 4.
    ret.vEgo, ret.aEgo = self.update_speed_kf(ret.vEgoRaw)

    # Match panda speed reading
    speed_kph = cp.vl["ENGINE_DATA"]["SPEED"]
    ret.standstill = speed_kph <= .1

    can_gear = int(cp.vl["GEAR"]["GEAR"])
    ret.gearShifter = self.parse_gear_shifter(self.shifter_values.get(can_gear, None))

    ret.genericToggle = bool(cp.vl["BLINK_INFO"]["HIGH_BEAMS"])
    ret.leftBlindspot = cp.vl["BSM"]["LEFT_BS_STATUS"] != 0
    ret.rightBlindspot = cp.vl["BSM"]["RIGHT_BS_STATUS"] != 0
    ret.leftBlinker, ret.rightBlinker = self.update_blinker_from_lamp(40, cp.vl["BLINK_INFO"]["LEFT_BLINK"] == 1,
                                                                      cp.vl["BLINK_INFO"]["RIGHT_BLINK"] == 1)

    ret.steeringAngleDeg = cp.vl["STEER"]["STEER_ANGLE"]
    ret.steeringTorque = cp.vl["STEER_TORQUE"]["STEER_TORQUE_SENSOR"]
    ret.steeringPressed = abs(ret.steeringTorque) > LKAS_LIMITS.STEER_THRESHOLD

    ret.steeringTorqueEps = cp.vl["STEER_TORQUE"]["STEER_TORQUE_MOTOR"]
    ret.steeringRateDeg = cp.vl["STEER_RATE"]["STEER_ANGLE_RATE"]

    # TODO: this should be from 0 - 1.
    ret.brakePressed = cp.vl["PEDALS"]["BRAKE_ON"] == 1
    ret.brake = cp.vl["BRAKE"]["BRAKE_PRESSURE"]

    ret.seatbeltUnlatched = cp.vl["SEATBELT"]["DRIVER_SEATBELT"] == 0
    ret.doorOpen = any([cp.vl["DOORS"]["FL"], cp.vl["DOORS"]["FR"],
                        cp.vl["DOORS"]["BL"], cp.vl["DOORS"]["BR"]])

    # TODO: this should be from 0 - 1.
    ret.gas = cp.vl["ENGINE_DATA"]["PEDAL_GAS"]
    ret.gasPressed = ret.gas > 0

    # Either due to low speed or hands off
    lkas_blocked = cp.vl["STEER_RATE"]["LKAS_BLOCK"] == 1

    if self.CP.minSteerSpeed > 0:
      # LKAS is enabled at 52kph going up and disabled at 45kph going down
      # wait for LKAS_BLOCK signal to clear when going up since it lags behind the speed sometimes
      if speed_kph > LKAS_LIMITS.ENABLE_SPEED and not lkas_blocked:
        self.lkas_allowed_speed = True
      elif speed_kph < LKAS_LIMITS.DISABLE_SPEED:
        self.lkas_allowed_speed = False
    else:
      self.lkas_allowed_speed = True

    # TODO: the signal used for available seems to be the adaptive cruise signal, instead of the main on
    #       it should be used for carState.cruiseState.nonAdaptive instead
    ret.cruiseState.available = cp.vl["CRZ_CTRL"]["CRZ_AVAILABLE"] == 1
    ret.cruiseState.enabled = cp.vl["CRZ_CTRL"]["CRZ_ACTIVE"] == 1
    ret.cruiseState.standstill = cp.vl["PEDALS"]["STANDSTILL"] == 1
    ret.cruiseState.speed = cp.vl["CRZ_EVENTS"]["CRZ_SPEED"] * CV.KPH_TO_MS

    # stock lkas should be on
    # TODO: is this needed?
    ret.invalidLkasSetting = cp_cam.vl["CAM_LANEINFO"]["LANE_LINES"] == 0

    if ret.cruiseState.enabled:
      if not self.lkas_allowed_speed and self.acc_active_last:
        self.low_speed_alert = True
      else:
        self.low_speed_alert = False
    ret.lowSpeedAlert = self.low_speed_alert

    # Check if LKAS is disabled due to lack of driver torque when all other states indicate
    # it should be enabled (steer lockout). Don't warn until we actually get lkas active
    # and lose it again, i.e, after initial lkas activation
    ret.steerFaultTemporary = self.lkas_allowed_speed and lkas_blocked

    self.acc_active_last = ret.cruiseState.enabled

    self.crz_btns_counter = cp.vl["CRZ_BTNS"]["CTR"]

    # camera signals
    self.cam_lkas = cp_cam.vl["CAM_LKAS"]
    self.cam_laneinfo = cp_cam.vl["CAM_LANEINFO"]
    ret.steerFaultPermanent = cp_cam.vl["CAM_LKAS"]["ERR_BIT_1"] == 1

    # TODO: add button types for inc and dec
    ret.buttonEvents = create_button_events(self.distance_button, prev_distance_button, {1: ButtonType.gapAdjustCruise})

    return ret

  @staticmethod
  def get_can_parsers(CP):
    pt_messages = [
      # sig_address, frequency
      ("BLINK_INFO", 10),
      ("STEER", 67),
      ("STEER_RATE", 83),
      ("STEER_TORQUE", 83),
      ("WHEEL_SPEEDS", 100),
    ]

    if CP.flags & MazdaFlags.GEN1:
      pt_messages += [
        ("ENGINE_DATA", 100),
        ("CRZ_CTRL", 50),
        ("CRZ_EVENTS", 50),
        ("CRZ_BTNS", 10),
        ("PEDALS", 50),
        ("BRAKE", 50),
        ("SEATBELT", 10),
        ("DOORS", 10),
        ("GEAR", 20),
        ("BSM", 10),
      ]

    cam_messages = []
    if CP.flags & MazdaFlags.GEN1:
      cam_messages += [
        # sig_address, frequency
        ("CAM_LANEINFO", 2),
        ("CAM_LKAS", 16),
      ]

    return {
      Bus.pt: CANParser(DBC[CP.carFingerprint][Bus.pt], pt_messages, 0),
      Bus.cam: CANParser(DBC[CP.carFingerprint][Bus.pt], cam_messages, 2),
    }