You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
83 lines
3.1 KiB
83 lines
3.1 KiB
# functions common among cars
|
|
from common.numpy_fast import clip
|
|
|
|
|
|
def dbc_dict(pt_dbc, radar_dbc, chassis_dbc=None):
|
|
return {'pt': pt_dbc, 'radar': radar_dbc, 'chassis': chassis_dbc}
|
|
|
|
|
|
def apply_std_steer_torque_limits(apply_torque, apply_torque_last, driver_torque, LIMITS):
|
|
|
|
# limits due to driver torque
|
|
driver_max_torque = LIMITS.STEER_MAX + (LIMITS.STEER_DRIVER_ALLOWANCE + driver_torque * LIMITS.STEER_DRIVER_FACTOR) * LIMITS.STEER_DRIVER_MULTIPLIER
|
|
driver_min_torque = -LIMITS.STEER_MAX + (-LIMITS.STEER_DRIVER_ALLOWANCE + driver_torque * LIMITS.STEER_DRIVER_FACTOR) * LIMITS.STEER_DRIVER_MULTIPLIER
|
|
max_steer_allowed = max(min(LIMITS.STEER_MAX, driver_max_torque), 0)
|
|
min_steer_allowed = min(max(-LIMITS.STEER_MAX, driver_min_torque), 0)
|
|
apply_torque = clip(apply_torque, min_steer_allowed, max_steer_allowed)
|
|
|
|
# slow rate if steer torque increases in magnitude
|
|
if apply_torque_last > 0:
|
|
apply_torque = clip(apply_torque, max(apply_torque_last - LIMITS.STEER_DELTA_DOWN, -LIMITS.STEER_DELTA_UP),
|
|
apply_torque_last + LIMITS.STEER_DELTA_UP)
|
|
else:
|
|
apply_torque = clip(apply_torque, apply_torque_last - LIMITS.STEER_DELTA_UP,
|
|
min(apply_torque_last + LIMITS.STEER_DELTA_DOWN, LIMITS.STEER_DELTA_UP))
|
|
|
|
return int(round(apply_torque))
|
|
|
|
|
|
def apply_toyota_steer_torque_limits(apply_torque, apply_torque_last, motor_torque, LIMITS):
|
|
|
|
# limits due to comparison of commanded torque VS motor reported torque
|
|
max_lim = min(max(motor_torque + LIMITS.STEER_ERROR_MAX, LIMITS.STEER_ERROR_MAX), LIMITS.STEER_MAX)
|
|
min_lim = max(min(motor_torque - LIMITS.STEER_ERROR_MAX, -LIMITS.STEER_ERROR_MAX), -LIMITS.STEER_MAX)
|
|
|
|
apply_torque = clip(apply_torque, min_lim, max_lim)
|
|
|
|
# slow rate if steer torque increases in magnitude
|
|
if apply_torque_last > 0:
|
|
apply_torque = clip(apply_torque,
|
|
max(apply_torque_last - LIMITS.STEER_DELTA_DOWN, -LIMITS.STEER_DELTA_UP),
|
|
apply_torque_last + LIMITS.STEER_DELTA_UP)
|
|
else:
|
|
apply_torque = clip(apply_torque,
|
|
apply_torque_last - LIMITS.STEER_DELTA_UP,
|
|
min(apply_torque_last + LIMITS.STEER_DELTA_DOWN, LIMITS.STEER_DELTA_UP))
|
|
|
|
return int(round(apply_torque))
|
|
|
|
|
|
def crc8_pedal(data):
|
|
crc = 0xFF # standard init value
|
|
poly = 0xD5 # standard crc8: x8+x7+x6+x4+x2+1
|
|
size = len(data)
|
|
for i in range(size-1, -1, -1):
|
|
crc ^= data[i]
|
|
for j in range(8):
|
|
if ((crc & 0x80) != 0):
|
|
crc = ((crc << 1) ^ poly) & 0xFF
|
|
else:
|
|
crc <<= 1
|
|
return crc
|
|
|
|
|
|
def create_gas_command(packer, gas_amount, idx):
|
|
# Common gas pedal msg generator
|
|
enable = gas_amount > 0.001
|
|
|
|
values = {
|
|
"ENABLE": enable,
|
|
"COUNTER_PEDAL": idx & 0xF,
|
|
}
|
|
|
|
if enable:
|
|
values["GAS_COMMAND"] = gas_amount * 255.
|
|
values["GAS_COMMAND2"] = gas_amount * 255.
|
|
|
|
dat = packer.make_can_msg("GAS_COMMAND", 0, values)[2]
|
|
|
|
dat = [ord(i) for i in dat]
|
|
checksum = crc8_pedal(dat[:-1])
|
|
values["CHECKSUM_PEDAL"] = checksum
|
|
|
|
return packer.make_can_msg("GAS_COMMAND", 0, values)
|
|
|