You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
187 lines
7.1 KiB
187 lines
7.1 KiB
from common.numpy_fast import clip, interp
|
|
from common.realtime import sec_since_boot
|
|
from selfdrive.boardd.boardd import can_list_to_can_capnp
|
|
from selfdrive.controls.lib.drive_helpers import rate_limit
|
|
from selfdrive.car.toyota.toyotacan import make_can_msg, create_video_target,\
|
|
create_steer_command, create_ui_command, \
|
|
create_ipas_steer_command, create_accel_command, \
|
|
create_fcw_command
|
|
from selfdrive.car.toyota.values import ECU, STATIC_MSGS
|
|
from common.fingerprints import TOYOTA as CAR
|
|
|
|
|
|
ACCEL_HYST_GAP = 0.02 # don't change accel command for small oscilalitons within this value
|
|
ACCEL_MAX = 1500 # 1.5 m/s2
|
|
ACCEL_MIN = -3000 # 3 m/s2
|
|
ACCEL_SCALE = max(ACCEL_MAX, -ACCEL_MIN)
|
|
|
|
STEER_MAX = 1500
|
|
STEER_DELTA_UP = 10 # 1.5s time to peak torque
|
|
STEER_DELTA_DOWN = 25 # always lower than 45 otherwise the Rav4 faults (Prius seems ok with 50)
|
|
STEER_ERROR_MAX = 350 # max delta between torque cmd and torque motor
|
|
|
|
TARGET_IDS = [0x340, 0x341, 0x342, 0x343, 0x344, 0x345,
|
|
0x363, 0x364, 0x365, 0x370, 0x371, 0x372,
|
|
0x373, 0x374, 0x375, 0x380, 0x381, 0x382,
|
|
0x383]
|
|
|
|
def accel_hysteresis(accel, accel_steady, enabled):
|
|
|
|
# for small accel oscillations within ACCEL_HYST_GAP, don't change the accel command
|
|
if not enabled:
|
|
# send 0 when disabled, otherwise acc faults
|
|
accel_steady = 0.
|
|
elif accel > accel_steady + ACCEL_HYST_GAP:
|
|
accel_steady = accel - ACCEL_HYST_GAP
|
|
elif accel < accel_steady - ACCEL_HYST_GAP:
|
|
accel_steady = accel + ACCEL_HYST_GAP
|
|
accel = accel_steady
|
|
|
|
return accel, accel_steady
|
|
|
|
|
|
def process_hud_alert(hud_alert, audible_alert):
|
|
# initialize to no alert
|
|
steer = 0
|
|
fcw = 0
|
|
sound1 = 0
|
|
sound2 = 0
|
|
|
|
if hud_alert == 'fcw':
|
|
fcw = 1
|
|
elif hud_alert == 'steerRequired':
|
|
steer = 1
|
|
|
|
if audible_alert == 'chimeRepeated':
|
|
sound1 = 1
|
|
elif audible_alert in ['beepSingle', 'chimeSingle', 'chimeDouble']:
|
|
# TODO: find a way to send single chimes
|
|
sound2 = 1
|
|
|
|
return steer, fcw, sound1, sound2
|
|
|
|
|
|
class CarController(object):
|
|
def __init__(self, car_fingerprint, enable_camera, enable_dsu, enable_apg):
|
|
self.braking = False
|
|
# redundant safety check with the board
|
|
self.controls_allowed = True
|
|
self.last_steer = 0.
|
|
self.accel_steady = 0.
|
|
self.car_fingerprint = car_fingerprint
|
|
self.alert_active = False
|
|
self.last_standstill = False
|
|
self.standstill_req = False
|
|
|
|
self.fake_ecus = set()
|
|
if enable_camera: self.fake_ecus.add(ECU.CAM)
|
|
if enable_dsu: self.fake_ecus.add(ECU.DSU)
|
|
if enable_apg: self.fake_ecus.add(ECU.APGS)
|
|
|
|
def update(self, sendcan, enabled, CS, frame, actuators,
|
|
pcm_cancel_cmd, hud_alert, audible_alert):
|
|
|
|
# *** compute control surfaces ***
|
|
ts = sec_since_boot()
|
|
|
|
# steer torque is converted back to CAN reference (positive when steering right)
|
|
apply_accel = actuators.gas - actuators.brake
|
|
apply_accel, self.accel_steady = accel_hysteresis(apply_accel, self.accel_steady, enabled)
|
|
apply_accel = int(round(clip(apply_accel * ACCEL_SCALE, ACCEL_MIN, ACCEL_MAX)))
|
|
|
|
# steer torque is converted back to CAN reference (positive when steering right)
|
|
apply_steer = int(round(actuators.steer * STEER_MAX))
|
|
|
|
max_lim = min(max(CS.steer_torque_motor + STEER_ERROR_MAX, STEER_ERROR_MAX), STEER_MAX)
|
|
min_lim = max(min(CS.steer_torque_motor - STEER_ERROR_MAX, -STEER_ERROR_MAX), -STEER_MAX)
|
|
|
|
apply_steer = clip(apply_steer, min_lim, max_lim)
|
|
|
|
# slow rate if steer torque increases in magnitude
|
|
if self.last_steer > 0:
|
|
apply_steer = clip(apply_steer, max(self.last_steer - STEER_DELTA_DOWN, - STEER_DELTA_UP), self.last_steer + STEER_DELTA_UP)
|
|
else:
|
|
apply_steer = clip(apply_steer, self.last_steer - STEER_DELTA_UP, min(self.last_steer + STEER_DELTA_DOWN, STEER_DELTA_UP))
|
|
|
|
if not enabled and CS.pcm_acc_status:
|
|
# send pcm acc cancel cmd if drive is disabled but pcm is still on, or if the system can't be activated
|
|
pcm_cancel_cmd = 1
|
|
|
|
# dropping torque immediately might cause eps to temp fault. On the other hand, safety_toyota
|
|
# cuts steer torque immediately anyway TODO: monitor if this is a real issue
|
|
if not enabled or CS.steer_error:
|
|
apply_steer = 0
|
|
|
|
# on entering standstill, send standstill request
|
|
if CS.standstill and not self.last_standstill:
|
|
self.standstill_req = True
|
|
if CS.pcm_acc_status != 8:
|
|
# pcm entered standstill or it's disabled
|
|
self.standstill_req = False
|
|
|
|
self.last_steer = apply_steer
|
|
self.last_accel = apply_accel
|
|
self.last_standstill = CS.standstill
|
|
|
|
can_sends = []
|
|
|
|
#*** control msgs ***
|
|
#print "steer", apply_steer, min_lim, max_lim, CS.steer_torque_motor
|
|
|
|
# toyota can trace shows this message at 42Hz, with counter adding alternatively 1 and 2;
|
|
# sending it at 100Hz seem to allow a higher rate limit, as the rate limit seems imposed
|
|
# on consecutive messages
|
|
if ECU.CAM in self.fake_ecus:
|
|
can_sends.append(create_steer_command(apply_steer, frame))
|
|
|
|
if ECU.APGS in self.fake_ecus:
|
|
can_sends.append(create_ipas_steer_command(apply_steer))
|
|
|
|
# accel cmd comes from DSU, but we can spam can to cancel the system even if we are using lat only control
|
|
if (frame % 3 == 0 and ECU.DSU in self.fake_ecus) or (pcm_cancel_cmd and ECU.CAM in self.fake_ecus):
|
|
if ECU.DSU in self.fake_ecus:
|
|
can_sends.append(create_accel_command(apply_accel, pcm_cancel_cmd, self.standstill_req))
|
|
else:
|
|
can_sends.append(create_accel_command(0, pcm_cancel_cmd, False))
|
|
|
|
if frame % 10 == 0 and ECU.CAM in self.fake_ecus:
|
|
for addr in TARGET_IDS:
|
|
can_sends.append(create_video_target(frame/10, addr))
|
|
|
|
# ui mesg is at 100Hz but we send asap if:
|
|
# - there is something to display
|
|
# - there is something to stop displaying
|
|
alert_out = process_hud_alert(hud_alert, audible_alert)
|
|
steer, fcw, sound1, sound2 = alert_out
|
|
|
|
if (any(alert_out) and not self.alert_active) or \
|
|
(not any(alert_out) and self.alert_active):
|
|
send_ui = True
|
|
self.alert_active = not self.alert_active
|
|
else:
|
|
send_ui = False
|
|
|
|
if (frame % 100 == 0 or send_ui) and ECU.CAM in self.fake_ecus:
|
|
can_sends.append(create_ui_command(steer, sound1, sound2))
|
|
can_sends.append(create_fcw_command(fcw))
|
|
|
|
#*** static msgs ***
|
|
|
|
for addr, (ecu, cars, bus, fr_step, vl) in STATIC_MSGS.iteritems():
|
|
if frame % fr_step == 0 and ecu in self.fake_ecus and self.car_fingerprint in cars:
|
|
# special cases
|
|
if fr_step == 5 and ecu == ECU.CAM and bus == 1:
|
|
cnt = (((frame / 5) % 7) + 1) << 5
|
|
vl = chr(cnt) + vl
|
|
elif addr in (0x489, 0x48a) and bus == 0:
|
|
# add counter for those 2 messages (last 4 bits)
|
|
cnt = ((frame/100)%0xf) + 1
|
|
if addr == 0x48a:
|
|
# 0x48a has a 8 preceding the counter
|
|
cnt += 1 << 7
|
|
vl += chr(cnt)
|
|
|
|
can_sends.append(make_can_msg(addr, vl, bus, False))
|
|
|
|
|
|
sendcan.send(can_list_to_can_capnp(can_sends, msgtype='sendcan').to_bytes())
|
|
|