You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
123 lines
4.0 KiB
123 lines
4.0 KiB
from selfdrive.car import make_can_msg
|
|
|
|
def create_steering_control(packer, bus, apply_steer, idx, lkas_active):
|
|
|
|
values = {
|
|
"LKASteeringCmdActive": lkas_active,
|
|
"LKASteeringCmd": apply_steer,
|
|
"RollingCounter": idx,
|
|
"LKASteeringCmdChecksum": 0x1000 - (lkas_active << 11) - (apply_steer & 0x7ff) - idx
|
|
}
|
|
|
|
return packer.make_can_msg("ASCMLKASteeringCmd", bus, values)
|
|
|
|
def create_adas_keepalive(bus):
|
|
dat = b"\x00\x00\x00\x00\x00\x00\x00"
|
|
return [make_can_msg(0x409, dat, bus), make_can_msg(0x40a, dat, bus)]
|
|
|
|
def create_gas_regen_command(packer, bus, throttle, idx, acc_engaged, at_full_stop):
|
|
values = {
|
|
"GasRegenCmdActive": acc_engaged,
|
|
"RollingCounter": idx,
|
|
"GasRegenCmdActiveInv": 1 - acc_engaged,
|
|
"GasRegenCmd": throttle,
|
|
"GasRegenFullStopActive": at_full_stop,
|
|
"GasRegenAlwaysOne": 1,
|
|
"GasRegenAlwaysOne2": 1,
|
|
"GasRegenAlwaysOne3": 1,
|
|
}
|
|
|
|
dat = packer.make_can_msg("ASCMGasRegenCmd", bus, values)[2]
|
|
values["GasRegenChecksum"] = (((0xff -dat[1]) & 0xff) << 16) | \
|
|
(((0xff - dat[2]) & 0xff) << 8) | \
|
|
((0x100 - dat[3] - idx) & 0xff)
|
|
|
|
return packer.make_can_msg("ASCMGasRegenCmd", bus, values)
|
|
|
|
def create_friction_brake_command(packer, bus, apply_brake, idx, near_stop, at_full_stop):
|
|
|
|
if apply_brake == 0:
|
|
mode = 0x1
|
|
else:
|
|
mode = 0xa
|
|
|
|
if at_full_stop:
|
|
mode = 0xd
|
|
# TODO: this is to have GM bringing the car to complete stop,
|
|
# but currently it conflicts with OP controls, so turned off.
|
|
#elif near_stop:
|
|
# mode = 0xb
|
|
|
|
brake = (0x1000 - apply_brake) & 0xfff
|
|
checksum = (0x10000 - (mode << 12) - brake - idx) & 0xffff
|
|
|
|
values = {
|
|
"RollingCounter" : idx,
|
|
"FrictionBrakeMode" : mode,
|
|
"FrictionBrakeChecksum": checksum,
|
|
"FrictionBrakeCmd" : -apply_brake
|
|
}
|
|
|
|
return packer.make_can_msg("EBCMFrictionBrakeCmd", bus, values)
|
|
|
|
def create_acc_dashboard_command(packer, bus, acc_engaged, target_speed_kph, lead_car_in_sight, fcw):
|
|
# Not a bit shift, dash can round up based on low 4 bits.
|
|
target_speed = int(target_speed_kph * 16) & 0xfff
|
|
|
|
values = {
|
|
"ACCAlwaysOne" : 1,
|
|
"ACCResumeButton" : 0,
|
|
"ACCSpeedSetpoint" : target_speed,
|
|
"ACCGapLevel" : 3 * acc_engaged, # 3 "far", 0 "inactive"
|
|
"ACCCmdActive" : acc_engaged,
|
|
"ACCAlwaysOne2" : 1,
|
|
"ACCLeadCar" : lead_car_in_sight,
|
|
"FCWAlert": fcw
|
|
}
|
|
|
|
return packer.make_can_msg("ASCMActiveCruiseControlStatus", bus, values)
|
|
|
|
def create_adas_time_status(bus, tt, idx):
|
|
dat = [(tt >> 20) & 0xff, (tt >> 12) & 0xff, (tt >> 4) & 0xff,
|
|
((tt & 0xf) << 4) + (idx << 2)]
|
|
chksum = 0x1000 - dat[0] - dat[1] - dat[2] - dat[3]
|
|
chksum = chksum & 0xfff
|
|
dat += [0x40 + (chksum >> 8), chksum & 0xff, 0x12]
|
|
return make_can_msg(0xa1, bytes(dat), bus)
|
|
|
|
def create_adas_steering_status(bus, idx):
|
|
dat = [idx << 6, 0xf0, 0x20, 0, 0, 0]
|
|
chksum = 0x60 + sum(dat)
|
|
dat += [chksum >> 8, chksum & 0xff]
|
|
return make_can_msg(0x306, bytes(dat), bus)
|
|
|
|
def create_adas_accelerometer_speed_status(bus, speed_ms, idx):
|
|
spd = int(speed_ms * 16) & 0xfff
|
|
accel = 0 & 0xfff
|
|
# 0 if in park/neutral, 0x10 if in reverse, 0x08 for D/L
|
|
#stick = 0x08
|
|
near_range_cutoff = 0x27
|
|
near_range_mode = 1 if spd <= near_range_cutoff else 0
|
|
far_range_mode = 1 - near_range_mode
|
|
dat = [0x08, spd >> 4, ((spd & 0xf) << 4) | (accel >> 8), accel & 0xff, 0]
|
|
chksum = 0x62 + far_range_mode + (idx << 2) + dat[0] + dat[1] + dat[2] + dat[3] + dat[4]
|
|
dat += [(idx << 5) + (far_range_mode << 4) + (near_range_mode << 3) + (chksum >> 8), chksum & 0xff]
|
|
return make_can_msg(0x308, bytes(dat), bus)
|
|
|
|
def create_adas_headlights_status(bus):
|
|
return make_can_msg(0x310, b"\x42\x04", bus)
|
|
|
|
def create_lka_icon_command(bus, active, critical, steer):
|
|
if active and steer == 1:
|
|
if critical:
|
|
dat = b"\x50\xc0\x14"
|
|
else:
|
|
dat = b"\x50\x40\x18"
|
|
elif active:
|
|
if critical:
|
|
dat = b"\x40\xc0\x14"
|
|
else:
|
|
dat = b"\x40\x40\x18"
|
|
else:
|
|
dat = b"\x00\x00\x00"
|
|
return make_can_msg(0x104c006c, dat, bus)
|
|
|