You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
115 lines
5.0 KiB
115 lines
5.0 KiB
#!/usr/bin/env python3
|
|
"""Some Hyundai radars can be reconfigured to output (debug) radar points on bus 1.
|
|
Reconfiguration is done over UDS by reading/writing to 0x0142 using the Read/Write Data By Identifier
|
|
endpoints (0x22 & 0x2E). This script checks your radar firmware version against a list of known
|
|
firmware versions. If you want to try on a new radar make sure to note the default config value
|
|
in case it's different from the other radars and you need to revert the changes.
|
|
|
|
After changing the config the car should not show any faults when openpilot is not running.
|
|
These config changes are persistent accross car reboots. You need to run this script again
|
|
to go back to the default values.
|
|
|
|
USE AT YOUR OWN RISK! Safety features, like AEB and FCW, might be affected by these changes."""
|
|
|
|
import sys
|
|
import argparse
|
|
from subprocess import check_output, CalledProcessError
|
|
|
|
from panda.python import Panda
|
|
from panda.python.uds import UdsClient, SESSION_TYPE, DATA_IDENTIFIER_TYPE
|
|
|
|
# If your radar supports changing data identifier 0x0142 as well make a PR to
|
|
# this file to add your firmware version. Make sure to post a drive as proof!
|
|
# NOTE: these firmware versions do not match what openpilot uses
|
|
# because this script uses a different diagnostic session type
|
|
SUPPORTED_FW_VERSIONS = {
|
|
# 2020 SONATA
|
|
b"DN8_ SCC FHCUP 1.00 1.00 99110-L0000\x19\x08)\x15T ": {
|
|
"default_config": b"\x00\x00\x00\x01\x00\x00",
|
|
"tracks_enabled": b"\x00\x00\x00\x01\x00\x01",
|
|
},
|
|
# 2021 SONATA HYBRID
|
|
b"DNhe SCC FHCUP 1.00 1.02 99110-L5000 \x01#\x15# ": {
|
|
"default_config": b"\x00\x00\x00\x01\x00\x00",
|
|
"tracks_enabled": b"\x00\x00\x00\x01\x00\x01",
|
|
},
|
|
# 2020 PALISADE
|
|
b"LX2_ SCC FHCUP 1.00 1.04 99110-S8100\x19\x05\x02\x16V ": {
|
|
"default_config": b"\x00\x00\x00\x01\x00\x00",
|
|
"tracks_enabled": b"\x00\x00\x00\x01\x00\x01",
|
|
},
|
|
# 2022 PALISADE
|
|
b"LX2_ SCC FHCUP 1.00 1.00 99110-S8110!\x04\x05\x17\x01 ": {
|
|
"default_config": b"\x00\x00\x00\x01\x00\x00",
|
|
"tracks_enabled": b"\x00\x00\x00\x01\x00\x01",
|
|
},
|
|
# 2020 SANTA FE
|
|
b"TM__ SCC F-CUP 1.00 1.03 99110-S2000\x19\x050\x13' ": {
|
|
"default_config": b"\x00\x00\x00\x01\x00\x00",
|
|
"tracks_enabled": b"\x00\x00\x00\x01\x00\x01",
|
|
},
|
|
|
|
# 2020 GENESIS G70
|
|
b'IK__ SCC F-CUP 1.00 1.02 96400-G9100\x18\x07\x06\x17\x12 ': {
|
|
"default config": b"\x00\x00\x00\x01\x00\x00",
|
|
"tracks_enabled": b"\x00\x00\x00\x01\x00\x01",
|
|
},
|
|
}
|
|
|
|
if __name__ == "__main__":
|
|
parser = argparse.ArgumentParser(description='configure radar to output points (or reset to default)')
|
|
parser.add_argument('--default', action="store_true", default=False, help='reset to default configuration (default: false)')
|
|
parser.add_argument('--debug', action="store_true", default=False, help='enable debug output (default: false)')
|
|
parser.add_argument('--bus', type=int, default=0, help='can bus to use (default: 0)')
|
|
args = parser.parse_args()
|
|
|
|
try:
|
|
check_output(["pidof", "boardd"])
|
|
print("boardd is running, please kill openpilot before running this script! (aborted)")
|
|
sys.exit(1)
|
|
except CalledProcessError as e:
|
|
if e.returncode != 1: # 1 == no process found (boardd not running)
|
|
raise e
|
|
|
|
confirm = input("power on the vehicle keeping the engine off (press start button twice) then type OK to continue: ").upper().strip()
|
|
if confirm != "OK":
|
|
print("\nyou didn't type 'OK! (aborted)")
|
|
sys.exit(0)
|
|
|
|
panda = Panda() # type: ignore
|
|
panda.set_safety_mode(Panda.SAFETY_ELM327)
|
|
uds_client = UdsClient(panda, 0x7D0, bus=args.bus, debug=args.debug)
|
|
|
|
print("\n[START DIAGNOSTIC SESSION]")
|
|
session_type : SESSION_TYPE = 0x07 # type: ignore
|
|
uds_client.diagnostic_session_control(session_type)
|
|
|
|
print("[HARDWARE/SOFTWARE VERSION]")
|
|
fw_version_data_id : DATA_IDENTIFIER_TYPE = 0xf100 # type: ignore
|
|
fw_version = uds_client.read_data_by_identifier(fw_version_data_id)
|
|
print(fw_version)
|
|
if fw_version not in SUPPORTED_FW_VERSIONS.keys():
|
|
print("radar not supported! (aborted)")
|
|
sys.exit(1)
|
|
|
|
print("[GET CONFIGURATION]")
|
|
config_data_id : DATA_IDENTIFIER_TYPE = 0x0142 # type: ignore
|
|
current_config = uds_client.read_data_by_identifier(config_data_id)
|
|
new_config = SUPPORTED_FW_VERSIONS[fw_version]["default_config" if args.default else "tracks_enabled"]
|
|
print(f"current config: 0x{current_config.hex()}")
|
|
if current_config != new_config:
|
|
print("[CHANGE CONFIGURATION]")
|
|
print(f"new config: 0x{new_config.hex()}")
|
|
uds_client.write_data_by_identifier(config_data_id, new_config)
|
|
if not args.default and current_config != SUPPORTED_FW_VERSIONS[fw_version]["default_config"]:
|
|
print("\ncurrent config does not match expected default! (aborted)")
|
|
sys.exit(1)
|
|
|
|
print("[DONE]")
|
|
print("\nrestart your vehicle and ensure there are no faults")
|
|
if not args.default:
|
|
print("you can run this script again with --default to go back to the original (factory) settings")
|
|
else:
|
|
print("[DONE]")
|
|
print("\ncurrent config is already the desired configuration")
|
|
sys.exit(0)
|
|
|