openpilot is an open source driver assistance system. openpilot performs the functions of Automated Lane Centering and Adaptive Cruise Control for over 200 supported car makes and models.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

94 lines
4.0 KiB

const int MAX_WRONG_COUNTERS = 5;
const uint8_t MAX_MISSED_MSGS = 10U;
// sample struct that keeps 3 samples in memory
struct sample_t {
int values[6];
int min;
int max;
} sample_t_default = {{0}, 0, 0};
// safety code requires floats
struct lookup_t {
float x[3];
float y[3];
};
typedef struct {
int addr;
int bus;
} AddrBus;
// params and flags about checksum, counter and frequency checks for each monitored address
typedef struct {
// const params
const int addr[3]; // check either messages (e.g. honda steer). Array MUST terminate with a zero to know its length.
const int bus; // bus where to expect the addr. Temp hack: -1 means skip the bus check
const bool check_checksum; // true is checksum check is performed
const uint8_t max_counter; // maximum value of the counter. 0 means that the counter check is skipped
const uint32_t expected_timestep; // expected time between message updates [us]
// dynamic flags
bool valid_checksum; // true if and only if checksum check is passed
int wrong_counters; // counter of wrong counters, saturated between 0 and MAX_WRONG_COUNTERS
uint8_t last_counter; // last counter value
uint32_t last_timestamp; // micro-s
bool lagging; // true if and only if the time between updates is excessive
} AddrCheckStruct;
int safety_rx_hook(CAN_FIFOMailBox_TypeDef *to_push);
int safety_tx_hook(CAN_FIFOMailBox_TypeDef *to_send);
int safety_tx_lin_hook(int lin_num, uint8_t *data, int len);
uint32_t get_ts_elapsed(uint32_t ts, uint32_t ts_last);
int to_signed(int d, int bits);
void update_sample(struct sample_t *sample, int sample_new);
bool max_limit_check(int val, const int MAX, const int MIN);
bool dist_to_meas_check(int val, int val_last, struct sample_t *val_meas,
const int MAX_RATE_UP, const int MAX_RATE_DOWN, const int MAX_ERROR);
bool driver_limit_check(int val, int val_last, struct sample_t *val_driver,
const int MAX, const int MAX_RATE_UP, const int MAX_RATE_DOWN,
const int MAX_ALLOWANCE, const int DRIVER_FACTOR);
bool rt_rate_limit_check(int val, int val_last, const int MAX_RT_DELTA);
float interpolate(struct lookup_t xy, float x);
bool msg_allowed(int addr, int bus, const AddrBus addr_list[], int len);
int get_addr_check_index(CAN_FIFOMailBox_TypeDef *to_push, AddrCheckStruct addr_list[], const int len);
void update_counter(AddrCheckStruct addr_list[], int index, uint8_t counter);
void update_addr_timestamp(AddrCheckStruct addr_list[], int index);
bool is_msg_valid(AddrCheckStruct addr_list[], int index);
bool addr_safety_check(CAN_FIFOMailBox_TypeDef *to_push,
AddrCheckStruct *addr_check,
const int addr_check_len,
uint8_t (*get_checksum)(CAN_FIFOMailBox_TypeDef *to_push),
uint8_t (*compute_checksum)(CAN_FIFOMailBox_TypeDef *to_push),
uint8_t (*get_counter)(CAN_FIFOMailBox_TypeDef *to_push));
typedef void (*safety_hook_init)(int16_t param);
typedef int (*rx_hook)(CAN_FIFOMailBox_TypeDef *to_push);
typedef int (*tx_hook)(CAN_FIFOMailBox_TypeDef *to_send);
typedef int (*tx_lin_hook)(int lin_num, uint8_t *data, int len);
typedef int (*fwd_hook)(int bus_num, CAN_FIFOMailBox_TypeDef *to_fwd);
typedef struct {
safety_hook_init init;
rx_hook rx;
tx_hook tx;
tx_lin_hook tx_lin;
fwd_hook fwd;
AddrCheckStruct *addr_check;
const int addr_check_len;
} safety_hooks;
void safety_tick(const safety_hooks *hooks);
// This can be set by the safety hooks
bool controls_allowed = false;
bool relay_malfunction = false;
bool gas_interceptor_detected = false;
int gas_interceptor_prev = 0;
// time since safety mode has been changed
uint32_t safety_mode_cnt = 0U;
// allow 1s of transition timeout after relay changes state before assessing malfunctioning
const uint32_t RELAY_TRNS_TIMEOUT = 1U;
// avg between 2 tracks
#define GET_INTERCEPTOR(msg) (((GET_BYTE((msg), 0) << 8) + GET_BYTE((msg), 1) + ((GET_BYTE((msg), 2) << 8) + GET_BYTE((msg), 3)) / 2 ) / 2)