You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
176 lines
8.8 KiB
176 lines
8.8 KiB
import math
|
|
import numpy as np
|
|
from opendbc.can.packer import CANPacker
|
|
from opendbc.car import ACCELERATION_DUE_TO_GRAVITY, Bus, DT_CTRL, apply_std_steer_angle_limits, structs
|
|
from opendbc.car.ford import fordcan
|
|
from opendbc.car.ford.values import CarControllerParams, FordFlags
|
|
from opendbc.car.interfaces import CarControllerBase, ISO_LATERAL_ACCEL, V_CRUISE_MAX
|
|
|
|
LongCtrlState = structs.CarControl.Actuators.LongControlState
|
|
VisualAlert = structs.CarControl.HUDControl.VisualAlert
|
|
|
|
# CAN FD limits:
|
|
# Limit to average banked road since safety doesn't have the roll
|
|
AVERAGE_ROAD_ROLL = 0.06 # ~3.4 degrees, 6% superelevation
|
|
MAX_LATERAL_ACCEL = ISO_LATERAL_ACCEL - (ACCELERATION_DUE_TO_GRAVITY * AVERAGE_ROAD_ROLL) # ~2.4 m/s^2
|
|
|
|
|
|
def apply_ford_curvature_limits(apply_curvature, apply_curvature_last, current_curvature, v_ego_raw, steering_angle, lat_active, CP):
|
|
# No blending at low speed due to lack of torque wind-up and inaccurate current curvature
|
|
if v_ego_raw > 9:
|
|
apply_curvature = np.clip(apply_curvature, current_curvature - CarControllerParams.CURVATURE_ERROR,
|
|
current_curvature + CarControllerParams.CURVATURE_ERROR)
|
|
|
|
# Curvature rate limit after driver torque limit
|
|
apply_curvature = apply_std_steer_angle_limits(apply_curvature, apply_curvature_last, v_ego_raw, steering_angle, lat_active, CarControllerParams.ANGLE_LIMITS)
|
|
|
|
# Ford Q4/CAN FD has more torque available compared to Q3/CAN so we limit it based on lateral acceleration.
|
|
# Safety is not aware of the road roll so we subtract a conservative amount at all times
|
|
if CP.flags & FordFlags.CANFD:
|
|
# Limit curvature to conservative max lateral acceleration
|
|
curvature_accel_limit = MAX_LATERAL_ACCEL / (max(v_ego_raw, 1) ** 2)
|
|
apply_curvature = float(np.clip(apply_curvature, -curvature_accel_limit, curvature_accel_limit))
|
|
|
|
return apply_curvature
|
|
|
|
|
|
def apply_creep_compensation(accel: float, v_ego: float) -> float:
|
|
creep_accel = np.interp(v_ego, [1., 3.], [0.6, 0.])
|
|
creep_accel = np.interp(accel, [0., 0.2], [creep_accel, 0.])
|
|
accel -= creep_accel
|
|
return float(accel)
|
|
|
|
|
|
class CarController(CarControllerBase):
|
|
def __init__(self, dbc_names, CP):
|
|
super().__init__(dbc_names, CP)
|
|
self.packer = CANPacker(dbc_names[Bus.pt])
|
|
self.CAN = fordcan.CanBus(CP)
|
|
|
|
self.apply_curvature_last = 0
|
|
self.accel = 0.0
|
|
self.gas = 0.0
|
|
self.brake_request = False
|
|
self.main_on_last = False
|
|
self.lkas_enabled_last = False
|
|
self.steer_alert_last = False
|
|
self.lead_distance_bars_last = None
|
|
self.distance_bar_frame = 0
|
|
|
|
def update(self, CC, CS, now_nanos):
|
|
can_sends = []
|
|
|
|
actuators = CC.actuators
|
|
hud_control = CC.hudControl
|
|
|
|
main_on = CS.out.cruiseState.available
|
|
steer_alert = hud_control.visualAlert in (VisualAlert.steerRequired, VisualAlert.ldw)
|
|
fcw_alert = hud_control.visualAlert == VisualAlert.fcw
|
|
|
|
### acc buttons ###
|
|
if CC.cruiseControl.cancel:
|
|
can_sends.append(fordcan.create_button_msg(self.packer, self.CAN.camera, CS.buttons_stock_values, cancel=True))
|
|
can_sends.append(fordcan.create_button_msg(self.packer, self.CAN.main, CS.buttons_stock_values, cancel=True))
|
|
elif CC.cruiseControl.resume and (self.frame % CarControllerParams.BUTTONS_STEP) == 0:
|
|
can_sends.append(fordcan.create_button_msg(self.packer, self.CAN.camera, CS.buttons_stock_values, resume=True))
|
|
can_sends.append(fordcan.create_button_msg(self.packer, self.CAN.main, CS.buttons_stock_values, resume=True))
|
|
# if stock lane centering isn't off, send a button press to toggle it off
|
|
# the stock system checks for steering pressed, and eventually disengages cruise control
|
|
elif CS.acc_tja_status_stock_values["Tja_D_Stat"] != 0 and (self.frame % CarControllerParams.ACC_UI_STEP) == 0:
|
|
can_sends.append(fordcan.create_button_msg(self.packer, self.CAN.camera, CS.buttons_stock_values, tja_toggle=True))
|
|
|
|
### lateral control ###
|
|
# send steer msg at 20Hz
|
|
if (self.frame % CarControllerParams.STEER_STEP) == 0:
|
|
# apply rate limits, curvature error limit, and clip to signal range
|
|
current_curvature = -CS.out.yawRate / max(CS.out.vEgoRaw, 0.1)
|
|
self.apply_curvature_last = apply_ford_curvature_limits(actuators.curvature, self.apply_curvature_last, current_curvature,
|
|
CS.out.vEgoRaw, 0., CC.latActive, self.CP)
|
|
|
|
if self.CP.flags & FordFlags.CANFD:
|
|
# TODO: extended mode
|
|
# Ford uses four individual signals to dictate how to drive to the car. Curvature alone (limited to 0.02m/s^2)
|
|
# can actuate the steering for a large portion of any lateral movements. However, in order to get further control on
|
|
# steer actuation, the other three signals are necessary. Ford controls vehicles differently than most other makes.
|
|
# A detailed explanation on ford control can be found here:
|
|
# https://www.f150gen14.com/forum/threads/introducing-bluepilot-a-ford-specific-fork-for-comma3x-openpilot.24241/#post-457706
|
|
mode = 1 if CC.latActive else 0
|
|
counter = (self.frame // CarControllerParams.STEER_STEP) % 0x10
|
|
can_sends.append(fordcan.create_lat_ctl2_msg(self.packer, self.CAN, mode, 0., 0., -self.apply_curvature_last, 0., counter))
|
|
else:
|
|
can_sends.append(fordcan.create_lat_ctl_msg(self.packer, self.CAN, CC.latActive, 0., 0., -self.apply_curvature_last, 0.))
|
|
|
|
# send lka msg at 33Hz
|
|
if (self.frame % CarControllerParams.LKA_STEP) == 0:
|
|
can_sends.append(fordcan.create_lka_msg(self.packer, self.CAN))
|
|
|
|
### longitudinal control ###
|
|
# send acc msg at 50Hz
|
|
if self.CP.openpilotLongitudinalControl and (self.frame % CarControllerParams.ACC_CONTROL_STEP) == 0:
|
|
accel = actuators.accel
|
|
gas = accel
|
|
|
|
if CC.longActive:
|
|
# Compensate for engine creep at low speed.
|
|
# Either the ABS does not account for engine creep, or the correction is very slow
|
|
# TODO: verify this applies to EV/hybrid
|
|
accel = apply_creep_compensation(accel, CS.out.vEgo)
|
|
|
|
# The stock system has been seen rate limiting the brake accel to 5 m/s^3,
|
|
# however even 3.5 m/s^3 causes some overshoot with a step response.
|
|
accel = max(accel, self.accel - (3.5 * CarControllerParams.ACC_CONTROL_STEP * DT_CTRL))
|
|
|
|
accel = float(np.clip(accel, CarControllerParams.ACCEL_MIN, CarControllerParams.ACCEL_MAX))
|
|
gas = float(np.clip(gas, CarControllerParams.ACCEL_MIN, CarControllerParams.ACCEL_MAX))
|
|
|
|
# Both gas and accel are in m/s^2, accel is used solely for braking
|
|
if not CC.longActive or gas < CarControllerParams.MIN_GAS:
|
|
gas = CarControllerParams.INACTIVE_GAS
|
|
|
|
# PCM applies pitch compensation to gas/accel, but we need to compensate for the brake/pre-charge bits
|
|
accel_due_to_pitch = 0.0
|
|
if len(CC.orientationNED) == 3:
|
|
accel_due_to_pitch = math.sin(CC.orientationNED[1]) * ACCELERATION_DUE_TO_GRAVITY
|
|
|
|
accel_pitch_compensated = accel + accel_due_to_pitch
|
|
if accel_pitch_compensated > 0.3 or not CC.longActive:
|
|
self.brake_request = False
|
|
elif accel_pitch_compensated < 0.0:
|
|
self.brake_request = True
|
|
|
|
stopping = CC.actuators.longControlState == LongCtrlState.stopping
|
|
# TODO: look into using the actuators packet to send the desired speed
|
|
can_sends.append(fordcan.create_acc_msg(self.packer, self.CAN, CC.longActive, gas, accel, stopping, self.brake_request, v_ego_kph=V_CRUISE_MAX))
|
|
|
|
self.accel = accel
|
|
self.gas = gas
|
|
|
|
### ui ###
|
|
send_ui = (self.main_on_last != main_on) or (self.lkas_enabled_last != CC.latActive) or (self.steer_alert_last != steer_alert)
|
|
# send lkas ui msg at 1Hz or if ui state changes
|
|
if (self.frame % CarControllerParams.LKAS_UI_STEP) == 0 or send_ui:
|
|
can_sends.append(fordcan.create_lkas_ui_msg(self.packer, self.CAN, main_on, CC.latActive, steer_alert, hud_control, CS.lkas_status_stock_values))
|
|
|
|
# send acc ui msg at 5Hz or if ui state changes
|
|
if hud_control.leadDistanceBars != self.lead_distance_bars_last:
|
|
send_ui = True
|
|
self.distance_bar_frame = self.frame
|
|
|
|
if (self.frame % CarControllerParams.ACC_UI_STEP) == 0 or send_ui:
|
|
show_distance_bars = self.frame - self.distance_bar_frame < 400
|
|
can_sends.append(fordcan.create_acc_ui_msg(self.packer, self.CAN, self.CP, main_on, CC.latActive,
|
|
fcw_alert, CS.out.cruiseState.standstill, show_distance_bars,
|
|
hud_control, CS.acc_tja_status_stock_values))
|
|
|
|
self.main_on_last = main_on
|
|
self.lkas_enabled_last = CC.latActive
|
|
self.steer_alert_last = steer_alert
|
|
self.lead_distance_bars_last = hud_control.leadDistanceBars
|
|
|
|
new_actuators = actuators.as_builder()
|
|
new_actuators.curvature = self.apply_curvature_last
|
|
new_actuators.accel = self.accel
|
|
new_actuators.gas = self.gas
|
|
|
|
self.frame += 1
|
|
return new_actuators, can_sends
|
|
|