You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1018 lines
36 KiB
1018 lines
36 KiB
// IRQs: OTG_FS
|
|
|
|
typedef union {
|
|
uint16_t w;
|
|
struct BW {
|
|
uint8_t msb;
|
|
uint8_t lsb;
|
|
}
|
|
bw;
|
|
}
|
|
uint16_t_uint8_t;
|
|
|
|
typedef union _USB_Setup {
|
|
uint32_t d8[2];
|
|
struct _SetupPkt_Struc
|
|
{
|
|
uint8_t bmRequestType;
|
|
uint8_t bRequest;
|
|
uint16_t_uint8_t wValue;
|
|
uint16_t_uint8_t wIndex;
|
|
uint16_t_uint8_t wLength;
|
|
} b;
|
|
}
|
|
USB_Setup_TypeDef;
|
|
|
|
void usb_init(void);
|
|
int usb_cb_control_msg(USB_Setup_TypeDef *setup, uint8_t *resp, bool hardwired);
|
|
int usb_cb_ep1_in(void *usbdata, int len, bool hardwired);
|
|
void usb_cb_ep2_out(void *usbdata, int len, bool hardwired);
|
|
void usb_cb_ep3_out(void *usbdata, int len, bool hardwired);
|
|
void usb_cb_enumeration_complete(void);
|
|
|
|
// **** supporting defines ****
|
|
|
|
typedef struct
|
|
{
|
|
__IO uint32_t HPRT;
|
|
}
|
|
USB_OTG_HostPortTypeDef;
|
|
|
|
USB_OTG_GlobalTypeDef *USBx = USB_OTG_FS;
|
|
|
|
#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t)USBx + USB_OTG_HOST_BASE))
|
|
#define USBx_HOST_PORT ((USB_OTG_HostPortTypeDef *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE))
|
|
#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t)USBx + USB_OTG_DEVICE_BASE))
|
|
#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
|
|
#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
|
|
#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE))
|
|
#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
|
|
|
|
#define USB_REQ_GET_STATUS 0x00
|
|
#define USB_REQ_CLEAR_FEATURE 0x01
|
|
#define USB_REQ_SET_FEATURE 0x03
|
|
#define USB_REQ_SET_ADDRESS 0x05
|
|
#define USB_REQ_GET_DESCRIPTOR 0x06
|
|
#define USB_REQ_SET_DESCRIPTOR 0x07
|
|
#define USB_REQ_GET_CONFIGURATION 0x08
|
|
#define USB_REQ_SET_CONFIGURATION 0x09
|
|
#define USB_REQ_GET_INTERFACE 0x0A
|
|
#define USB_REQ_SET_INTERFACE 0x0B
|
|
#define USB_REQ_SYNCH_FRAME 0x0C
|
|
|
|
#define USB_DESC_TYPE_DEVICE 0x01
|
|
#define USB_DESC_TYPE_CONFIGURATION 0x02
|
|
#define USB_DESC_TYPE_STRING 0x03
|
|
#define USB_DESC_TYPE_INTERFACE 0x04
|
|
#define USB_DESC_TYPE_ENDPOINT 0x05
|
|
#define USB_DESC_TYPE_DEVICE_QUALIFIER 0x06
|
|
#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 0x07
|
|
#define USB_DESC_TYPE_BINARY_OBJECT_STORE 0x0f
|
|
|
|
// offsets for configuration strings
|
|
#define STRING_OFFSET_LANGID 0x00
|
|
#define STRING_OFFSET_IMANUFACTURER 0x01
|
|
#define STRING_OFFSET_IPRODUCT 0x02
|
|
#define STRING_OFFSET_ISERIAL 0x03
|
|
#define STRING_OFFSET_ICONFIGURATION 0x04
|
|
#define STRING_OFFSET_IINTERFACE 0x05
|
|
|
|
// WebUSB requests
|
|
#define WEBUSB_REQ_GET_URL 0x02
|
|
|
|
// WebUSB types
|
|
#define WEBUSB_DESC_TYPE_URL 0x03
|
|
#define WEBUSB_URL_SCHEME_HTTPS 0x01
|
|
#define WEBUSB_URL_SCHEME_HTTP 0x00
|
|
|
|
// WinUSB requests
|
|
#define WINUSB_REQ_GET_COMPATID_DESCRIPTOR 0x04
|
|
#define WINUSB_REQ_GET_EXT_PROPS_OS 0x05
|
|
#define WINUSB_REQ_GET_DESCRIPTOR 0x07
|
|
|
|
#define STS_GOUT_NAK 1
|
|
#define STS_DATA_UPDT 2
|
|
#define STS_XFER_COMP 3
|
|
#define STS_SETUP_COMP 4
|
|
#define STS_SETUP_UPDT 6
|
|
|
|
#define USBD_FS_TRDT_VALUE 5U
|
|
|
|
#define USB_OTG_SPEED_FULL 3
|
|
|
|
uint8_t resp[MAX_RESP_LEN];
|
|
|
|
// for the repeating interfaces
|
|
#define DSCR_INTERFACE_LEN 9
|
|
#define DSCR_ENDPOINT_LEN 7
|
|
#define DSCR_CONFIG_LEN 9
|
|
#define DSCR_DEVICE_LEN 18
|
|
|
|
// endpoint types
|
|
#define ENDPOINT_TYPE_CONTROL 0
|
|
#define ENDPOINT_TYPE_ISO 1
|
|
#define ENDPOINT_TYPE_BULK 2
|
|
#define ENDPOINT_TYPE_INT 3
|
|
|
|
// These are arbitrary values used in bRequest
|
|
#define MS_VENDOR_CODE 0x20
|
|
#define WEBUSB_VENDOR_CODE 0x30
|
|
|
|
// BOS constants
|
|
#define BINARY_OBJECT_STORE_DESCRIPTOR_LENGTH 0x05
|
|
#define BINARY_OBJECT_STORE_DESCRIPTOR 0x0F
|
|
#define WINUSB_PLATFORM_DESCRIPTOR_LENGTH 0x9E
|
|
|
|
// Convert machine byte order to USB byte order
|
|
#define TOUSBORDER(num)\
|
|
((num) & 0xFFU), (((num) >> 8) & 0xFFU)
|
|
|
|
// take in string length and return the first 2 bytes of a string descriptor
|
|
#define STRING_DESCRIPTOR_HEADER(size)\
|
|
(((((size) * 2) + 2) & 0xFF) | 0x0300)
|
|
|
|
uint8_t device_desc[] = {
|
|
DSCR_DEVICE_LEN, USB_DESC_TYPE_DEVICE, //Length, Type
|
|
0x10, 0x02, // bcdUSB max version of USB supported (2.1)
|
|
0xFF, 0xFF, 0xFF, 0x40, // Class, Subclass, Protocol, Max Packet Size
|
|
TOUSBORDER(USB_VID), // idVendor
|
|
TOUSBORDER(USB_PID), // idProduct
|
|
#ifdef STM32F4
|
|
0x00, 0x23, // bcdDevice
|
|
#else
|
|
0x00, 0x22, // bcdDevice
|
|
#endif
|
|
0x01, 0x02, // Manufacturer, Product
|
|
0x03, 0x01 // Serial Number, Num Configurations
|
|
};
|
|
|
|
uint8_t device_qualifier[] = {
|
|
0x0a, USB_DESC_TYPE_DEVICE_QUALIFIER, //Length, Type
|
|
0x10, 0x02, // bcdUSB max version of USB supported (2.1)
|
|
0xFF, 0xFF, 0xFF, 0x40, // bDeviceClass, bDeviceSubClass, bDeviceProtocol, bMaxPacketSize0
|
|
0x01, 0x00 // bNumConfigurations, bReserved
|
|
};
|
|
|
|
#define ENDPOINT_RCV 0x80
|
|
#define ENDPOINT_SND 0x00
|
|
|
|
uint8_t configuration_desc[] = {
|
|
DSCR_CONFIG_LEN, USB_DESC_TYPE_CONFIGURATION, // Length, Type,
|
|
TOUSBORDER(0x0045U), // Total Len (uint16)
|
|
0x01, 0x01, STRING_OFFSET_ICONFIGURATION, // Num Interface, Config Value, Configuration
|
|
0xc0, 0x32, // Attributes, Max Power
|
|
// interface 0 ALT 0
|
|
DSCR_INTERFACE_LEN, USB_DESC_TYPE_INTERFACE, // Length, Type
|
|
0x00, 0x00, 0x03, // Index, Alt Index idx, Endpoint count
|
|
0XFF, 0xFF, 0xFF, // Class, Subclass, Protocol
|
|
0x00, // Interface
|
|
// endpoint 1, read CAN
|
|
DSCR_ENDPOINT_LEN, USB_DESC_TYPE_ENDPOINT, // Length, Type
|
|
ENDPOINT_RCV | 1, ENDPOINT_TYPE_BULK, // Endpoint Num/Direction, Type
|
|
TOUSBORDER(0x0040U), // Max Packet (0x0040)
|
|
0x00, // Polling Interval (NA)
|
|
// endpoint 2, send serial
|
|
DSCR_ENDPOINT_LEN, USB_DESC_TYPE_ENDPOINT, // Length, Type
|
|
ENDPOINT_SND | 2, ENDPOINT_TYPE_BULK, // Endpoint Num/Direction, Type
|
|
TOUSBORDER(0x0040U), // Max Packet (0x0040)
|
|
0x00, // Polling Interval
|
|
// endpoint 3, send CAN
|
|
DSCR_ENDPOINT_LEN, USB_DESC_TYPE_ENDPOINT, // Length, Type
|
|
ENDPOINT_SND | 3, ENDPOINT_TYPE_BULK, // Endpoint Num/Direction, Type
|
|
TOUSBORDER(0x0040U), // Max Packet (0x0040)
|
|
0x00, // Polling Interval
|
|
// interface 0 ALT 1
|
|
DSCR_INTERFACE_LEN, USB_DESC_TYPE_INTERFACE, // Length, Type
|
|
0x00, 0x01, 0x03, // Index, Alt Index idx, Endpoint count
|
|
0XFF, 0xFF, 0xFF, // Class, Subclass, Protocol
|
|
0x00, // Interface
|
|
// endpoint 1, read CAN
|
|
DSCR_ENDPOINT_LEN, USB_DESC_TYPE_ENDPOINT, // Length, Type
|
|
ENDPOINT_RCV | 1, ENDPOINT_TYPE_INT, // Endpoint Num/Direction, Type
|
|
TOUSBORDER(0x0040U), // Max Packet (0x0040)
|
|
0x05, // Polling Interval (5 frames)
|
|
// endpoint 2, send serial
|
|
DSCR_ENDPOINT_LEN, USB_DESC_TYPE_ENDPOINT, // Length, Type
|
|
ENDPOINT_SND | 2, ENDPOINT_TYPE_BULK, // Endpoint Num/Direction, Type
|
|
TOUSBORDER(0x0040U), // Max Packet (0x0040)
|
|
0x00, // Polling Interval
|
|
// endpoint 3, send CAN
|
|
DSCR_ENDPOINT_LEN, USB_DESC_TYPE_ENDPOINT, // Length, Type
|
|
ENDPOINT_SND | 3, ENDPOINT_TYPE_BULK, // Endpoint Num/Direction, Type
|
|
TOUSBORDER(0x0040U), // Max Packet (0x0040)
|
|
0x00, // Polling Interval
|
|
};
|
|
|
|
// STRING_DESCRIPTOR_HEADER is for uint16 string descriptors
|
|
// it takes in a string length, which is bytes/2 because unicode
|
|
uint16_t string_language_desc[] = {
|
|
STRING_DESCRIPTOR_HEADER(1),
|
|
0x0409 // american english
|
|
};
|
|
|
|
// these strings are all uint16's so that we don't need to spam ,0 after every character
|
|
uint16_t string_manufacturer_desc[] = {
|
|
STRING_DESCRIPTOR_HEADER(8),
|
|
'c', 'o', 'm', 'm', 'a', '.', 'a', 'i'
|
|
};
|
|
|
|
uint16_t string_product_desc[] = {
|
|
STRING_DESCRIPTOR_HEADER(5),
|
|
'p', 'a', 'n', 'd', 'a'
|
|
};
|
|
|
|
// default serial number when we're not a panda
|
|
uint16_t string_serial_desc[] = {
|
|
STRING_DESCRIPTOR_HEADER(4),
|
|
'n', 'o', 'n', 'e'
|
|
};
|
|
|
|
// a string containing the default configuration index
|
|
uint16_t string_configuration_desc[] = {
|
|
STRING_DESCRIPTOR_HEADER(2),
|
|
'0', '1' // "01"
|
|
};
|
|
|
|
// WCID (auto install WinUSB driver)
|
|
// https://github.com/pbatard/libwdi/wiki/WCID-Devices
|
|
// https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/winusb-installation#automatic-installation-of--winusb-without-an-inf-file
|
|
// WinUSB 1.0 descriptors, this is mostly used by Windows XP
|
|
uint8_t string_238_desc[] = {
|
|
0x12, USB_DESC_TYPE_STRING, // bLength, bDescriptorType
|
|
'M',0, 'S',0, 'F',0, 'T',0, '1',0, '0',0, '0',0, // qwSignature (MSFT100)
|
|
MS_VENDOR_CODE, 0x00 // bMS_VendorCode, bPad
|
|
};
|
|
uint8_t winusb_ext_compatid_os_desc[] = {
|
|
0x28, 0x00, 0x00, 0x00, // dwLength
|
|
0x00, 0x01, // bcdVersion
|
|
0x04, 0x00, // wIndex
|
|
0x01, // bCount
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved
|
|
0x00, // bFirstInterfaceNumber
|
|
0x00, // Reserved
|
|
'W', 'I', 'N', 'U', 'S', 'B', 0x00, 0x00, // compatible ID (WINUSB)
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // subcompatible ID (none)
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00 // Reserved
|
|
};
|
|
uint8_t winusb_ext_prop_os_desc[] = {
|
|
0x8e, 0x00, 0x00, 0x00, // dwLength
|
|
0x00, 0x01, // bcdVersion
|
|
0x05, 0x00, // wIndex
|
|
0x01, 0x00, // wCount
|
|
// first property
|
|
0x84, 0x00, 0x00, 0x00, // dwSize
|
|
0x01, 0x00, 0x00, 0x00, // dwPropertyDataType
|
|
0x28, 0x00, // wPropertyNameLength
|
|
'D',0, 'e',0, 'v',0, 'i',0, 'c',0, 'e',0, 'I',0, 'n',0, 't',0, 'e',0, 'r',0, 'f',0, 'a',0, 'c',0, 'e',0, 'G',0, 'U',0, 'I',0, 'D',0, 0, 0, // bPropertyName (DeviceInterfaceGUID)
|
|
0x4e, 0x00, 0x00, 0x00, // dwPropertyDataLength
|
|
'{',0, 'c',0, 'c',0, 'e',0, '5',0, '2',0, '9',0, '1',0, 'c',0, '-',0, 'a',0, '6',0, '9',0, 'f',0, '-',0, '4',0 ,'9',0 ,'9',0 ,'5',0 ,'-',0, 'a',0, '4',0, 'c',0, '2',0, '-',0, '2',0, 'a',0, 'e',0, '5',0, '7',0, 'a',0, '5',0, '1',0, 'a',0, 'd',0, 'e',0, '9',0, '}',0, 0, 0, // bPropertyData ({CCE5291C-A69F-4995-A4C2-2AE57A51ADE9})
|
|
};
|
|
|
|
/*
|
|
Binary Object Store descriptor used to expose WebUSB (and more WinUSB) metadata
|
|
comments are from the wicg spec
|
|
References used:
|
|
https://wicg.github.io/webusb/#webusb-platform-capability-descriptor
|
|
https://github.com/sowbug/weblight/blob/192ad7a0e903542e2aa28c607d98254a12a6399d/firmware/webusb.c
|
|
https://os.mbed.com/users/larsgk/code/USBDevice_WebUSB/file/1d8a6665d607/WebUSBDevice/
|
|
|
|
*/
|
|
uint8_t binary_object_store_desc[] = {
|
|
// BOS header
|
|
BINARY_OBJECT_STORE_DESCRIPTOR_LENGTH, // bLength, this is only the length of the header
|
|
BINARY_OBJECT_STORE_DESCRIPTOR, // bDescriptorType
|
|
0x40, 0x00, // wTotalLength (LSB, MSB)
|
|
0x03, // bNumDeviceCaps (USB 2.0 + WebUSB + WinUSB)
|
|
|
|
// -------------------------------------------------
|
|
// USB 2.0 extension descriptor
|
|
0x07, // bLength, Descriptor size
|
|
0x10, // bDescriptorType, Device Capability Descriptor Type
|
|
0x02, // bDevCapabilityType, USB 2.0 extension capability type
|
|
0x00, 0x00, 0x00, 0x00, // bmAttributes, LIBUSB_BM_LPM_SUPPORT = 2 and its the only option
|
|
|
|
// -------------------------------------------------
|
|
// WebUSB descriptor
|
|
// header
|
|
0x18, // bLength, Size of this descriptor. Must be set to 24.
|
|
0x10, // bDescriptorType, DEVICE CAPABILITY descriptor
|
|
0x05, // bDevCapabilityType, PLATFORM capability
|
|
0x00, // bReserved, This field is reserved and shall be set to zero.
|
|
|
|
// PlatformCapabilityUUID, Must be set to {3408b638-09a9-47a0-8bfd-a0768815b665}.
|
|
0x38, 0xB6, 0x08, 0x34,
|
|
0xA9, 0x09, 0xA0, 0x47,
|
|
0x8B, 0xFD, 0xA0, 0x76,
|
|
0x88, 0x15, 0xB6, 0x65,
|
|
// </PlatformCapabilityUUID>
|
|
|
|
0x00, 0x01, // bcdVersion, Protocol version supported. Must be set to 0x0100.
|
|
WEBUSB_VENDOR_CODE, // bVendorCode, bRequest value used for issuing WebUSB requests.
|
|
// there used to be a concept of "allowed origins", but it was removed from the spec
|
|
// it was intended to be a security feature, but then the entire security model relies on domain ownership
|
|
// https://github.com/WICG/webusb/issues/49
|
|
// other implementations use various other indexed to leverate this no-longer-valid feature. we wont.
|
|
// the spec says we *must* reply to index 0x03 with the url, so we'll hint that that's the right index
|
|
0x03, // iLandingPage, URL descriptor index of the device’s landing page.
|
|
|
|
// -------------------------------------------------
|
|
// WinUSB descriptor
|
|
// header
|
|
0x1C, // Descriptor size (28 bytes)
|
|
0x10, // Descriptor type (Device Capability)
|
|
0x05, // Capability type (Platform)
|
|
0x00, // Reserved
|
|
|
|
// MS OS 2.0 Platform Capability ID (D8DD60DF-4589-4CC7-9CD2-659D9E648A9F)
|
|
// Indicates the device supports the Microsoft OS 2.0 descriptor
|
|
0xDF, 0x60, 0xDD, 0xD8,
|
|
0x89, 0x45, 0xC7, 0x4C,
|
|
0x9C, 0xD2, 0x65, 0x9D,
|
|
0x9E, 0x64, 0x8A, 0x9F,
|
|
|
|
0x00, 0x00, 0x03, 0x06, // Windows version, currently set to 8.1 (0x06030000)
|
|
|
|
WINUSB_PLATFORM_DESCRIPTOR_LENGTH, 0x00, // MS OS 2.0 descriptor size (word)
|
|
MS_VENDOR_CODE, 0x00 // vendor code, no alternate enumeration
|
|
};
|
|
|
|
uint8_t webusb_url_descriptor[] = {
|
|
0x14, /* bLength */
|
|
WEBUSB_DESC_TYPE_URL, // bDescriptorType
|
|
WEBUSB_URL_SCHEME_HTTPS, // bScheme
|
|
'u', 's', 'b', 'p', 'a', 'n', 'd', 'a', '.', 'c', 'o', 'm', 'm', 'a', '.', 'a', 'i'
|
|
};
|
|
|
|
// WinUSB 2.0 descriptor. This is what modern systems use
|
|
// https://github.com/sowbug/weblight/blob/192ad7a0e903542e2aa28c607d98254a12a6399d/firmware/webusb.c
|
|
// http://janaxelson.com/files/ms_os_20_descriptors.c
|
|
// https://books.google.com/books?id=pkefBgAAQBAJ&pg=PA353&lpg=PA353
|
|
uint8_t winusb_20_desc[WINUSB_PLATFORM_DESCRIPTOR_LENGTH] = {
|
|
// Microsoft OS 2.0 descriptor set header (table 10)
|
|
0x0A, 0x00, // Descriptor size (10 bytes)
|
|
0x00, 0x00, // MS OS 2.0 descriptor set header
|
|
|
|
0x00, 0x00, 0x03, 0x06, // Windows version (8.1) (0x06030000)
|
|
WINUSB_PLATFORM_DESCRIPTOR_LENGTH, 0x00, // Total size of MS OS 2.0 descriptor set
|
|
|
|
// Microsoft OS 2.0 compatible ID descriptor
|
|
0x14, 0x00, // Descriptor size (20 bytes)
|
|
0x03, 0x00, // MS OS 2.0 compatible ID descriptor
|
|
'W', 'I', 'N', 'U', 'S', 'B', 0x00, 0x00, // compatible ID (WINUSB)
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Sub-compatible ID
|
|
|
|
// Registry property descriptor
|
|
0x80, 0x00, // Descriptor size (130 bytes)
|
|
0x04, 0x00, // Registry Property descriptor
|
|
0x01, 0x00, // Strings are null-terminated Unicode
|
|
0x28, 0x00, // Size of Property Name (40 bytes) "DeviceInterfaceGUID"
|
|
|
|
// bPropertyName (DeviceInterfaceGUID)
|
|
'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00,
|
|
't', 0x00, 'e', 0x00, 'r', 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00,
|
|
'U', 0x00, 'I', 0x00, 'D', 0x00, 0x00, 0x00,
|
|
|
|
0x4E, 0x00, // Size of Property Data (78 bytes)
|
|
|
|
// Vendor-defined property data: {CCE5291C-A69F-4995-A4C2-2AE57A51ADE9}
|
|
'{', 0x00, 'c', 0x00, 'c', 0x00, 'e', 0x00, '5', 0x00, '2', 0x00, '9', 0x00, '1', 0x00, // 16
|
|
'c', 0x00, '-', 0x00, 'a', 0x00, '6', 0x00, '9', 0x00, 'f', 0x00, '-', 0x00, '4', 0x00, // 32
|
|
'9', 0x00, '9', 0x00, '5', 0x00, '-', 0x00, 'a', 0x00, '4', 0x00, 'c', 0x00, '2', 0x00, // 48
|
|
'-', 0x00, '2', 0x00, 'a', 0x00, 'e', 0x00, '5', 0x00, '7', 0x00, 'a', 0x00, '5', 0x00, // 64
|
|
'1', 0x00, 'a', 0x00, 'd', 0x00, 'e', 0x00, '9', 0x00, '}', 0x00, 0x00, 0x00 // 78 bytes
|
|
};
|
|
|
|
// current packet
|
|
USB_Setup_TypeDef setup;
|
|
uint8_t usbdata[0x100];
|
|
uint8_t* ep0_txdata = NULL;
|
|
uint16_t ep0_txlen = 0;
|
|
|
|
// Store the current interface alt setting.
|
|
int current_int0_alt_setting = 0;
|
|
|
|
// packet read and write
|
|
|
|
void *USB_ReadPacket(void *dest, uint16_t len) {
|
|
uint32_t *dest_copy = (uint32_t *)dest;
|
|
uint32_t count32b = (len + 3U) / 4U;
|
|
|
|
for (uint32_t i = 0; i < count32b; i++) {
|
|
*dest_copy = USBx_DFIFO(0);
|
|
dest_copy++;
|
|
}
|
|
return ((void *)dest_copy);
|
|
}
|
|
|
|
void USB_WritePacket(const void *src, uint16_t len, uint32_t ep) {
|
|
#ifdef DEBUG_USB
|
|
puts("writing ");
|
|
hexdump(src, len);
|
|
#endif
|
|
|
|
uint8_t numpacket = (len + (MAX_RESP_LEN - 1U)) / MAX_RESP_LEN;
|
|
uint32_t count32b = 0;
|
|
count32b = (len + 3U) / 4U;
|
|
|
|
// TODO: revisit this
|
|
USBx_INEP(ep)->DIEPTSIZ = ((numpacket << 19) & USB_OTG_DIEPTSIZ_PKTCNT) |
|
|
(len & USB_OTG_DIEPTSIZ_XFRSIZ);
|
|
USBx_INEP(ep)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
|
|
|
|
// load the FIFO
|
|
const uint32_t *src_copy = (const uint32_t *)src;
|
|
for (uint32_t i = 0; i < count32b; i++) {
|
|
USBx_DFIFO(ep) = *src_copy;
|
|
src_copy++;
|
|
}
|
|
}
|
|
|
|
// IN EP 0 TX FIFO has a max size of 127 bytes (much smaller than the rest)
|
|
// so use TX FIFO empty interrupt to send larger amounts of data
|
|
void USB_WritePacket_EP0(uint8_t *src, uint16_t len) {
|
|
#ifdef DEBUG_USB
|
|
puts("writing ");
|
|
hexdump(src, len);
|
|
#endif
|
|
|
|
uint16_t wplen = MIN(len, 0x40);
|
|
USB_WritePacket(src, wplen, 0);
|
|
|
|
if (wplen < len) {
|
|
ep0_txdata = &src[wplen];
|
|
ep0_txlen = len - wplen;
|
|
USBx_DEVICE->DIEPEMPMSK |= 1;
|
|
} else {
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
}
|
|
}
|
|
|
|
void usb_reset(void) {
|
|
// unmask endpoint interrupts, so many sets
|
|
USBx_DEVICE->DAINT = 0xFFFFFFFF;
|
|
USBx_DEVICE->DAINTMSK = 0xFFFFFFFF;
|
|
//USBx_DEVICE->DOEPMSK = (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM);
|
|
//USBx_DEVICE->DIEPMSK = (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM | USB_OTG_DIEPMSK_ITTXFEMSK);
|
|
//USBx_DEVICE->DIEPMSK = (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
|
|
|
|
// all interrupts for debugging
|
|
USBx_DEVICE->DIEPMSK = 0xFFFFFFFF;
|
|
USBx_DEVICE->DOEPMSK = 0xFFFFFFFF;
|
|
|
|
// clear interrupts
|
|
USBx_INEP(0)->DIEPINT = 0xFF;
|
|
USBx_OUTEP(0)->DOEPINT = 0xFF;
|
|
|
|
// unset the address
|
|
USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD;
|
|
|
|
// set up USB FIFOs
|
|
// RX start address is fixed to 0
|
|
USBx->GRXFSIZ = 0x40;
|
|
|
|
// 0x100 to offset past GRXFSIZ
|
|
USBx->DIEPTXF0_HNPTXFSIZ = (0x40U << 16) | 0x40U;
|
|
|
|
// EP1, massive
|
|
USBx->DIEPTXF[0] = (0x40U << 16) | 0x80U;
|
|
|
|
// flush TX fifo
|
|
USBx->GRSTCTL = USB_OTG_GRSTCTL_TXFFLSH | USB_OTG_GRSTCTL_TXFNUM_4;
|
|
while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH);
|
|
// flush RX FIFO
|
|
USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH;
|
|
while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH);
|
|
|
|
// no global NAK
|
|
USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK;
|
|
|
|
// ready to receive setup packets
|
|
USBx_OUTEP(0)->DOEPTSIZ = USB_OTG_DOEPTSIZ_STUPCNT | (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)) | (3U << 3);
|
|
}
|
|
|
|
char to_hex_char(int a) {
|
|
char ret;
|
|
if (a < 10) {
|
|
ret = '0' + a;
|
|
} else {
|
|
ret = 'a' + (a - 10);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
void usb_setup(void) {
|
|
int resp_len;
|
|
// setup packet is ready
|
|
switch (setup.b.bRequest) {
|
|
case USB_REQ_SET_CONFIGURATION:
|
|
// enable other endpoints, has to be here?
|
|
USBx_INEP(1)->DIEPCTL = (0x40U & USB_OTG_DIEPCTL_MPSIZ) | (2U << 18) | (1U << 22) |
|
|
USB_OTG_DIEPCTL_SD0PID_SEVNFRM | USB_OTG_DIEPCTL_USBAEP;
|
|
USBx_INEP(1)->DIEPINT = 0xFF;
|
|
|
|
USBx_OUTEP(2)->DOEPTSIZ = (1U << 19) | 0x40U;
|
|
USBx_OUTEP(2)->DOEPCTL = (0x40U & USB_OTG_DOEPCTL_MPSIZ) | (2U << 18) |
|
|
USB_OTG_DOEPCTL_SD0PID_SEVNFRM | USB_OTG_DOEPCTL_USBAEP;
|
|
USBx_OUTEP(2)->DOEPINT = 0xFF;
|
|
|
|
USBx_OUTEP(3)->DOEPTSIZ = (1U << 19) | 0x40U;
|
|
USBx_OUTEP(3)->DOEPCTL = (0x40U & USB_OTG_DOEPCTL_MPSIZ) | (2U << 18) |
|
|
USB_OTG_DOEPCTL_SD0PID_SEVNFRM | USB_OTG_DOEPCTL_USBAEP;
|
|
USBx_OUTEP(3)->DOEPINT = 0xFF;
|
|
|
|
// mark ready to receive
|
|
USBx_OUTEP(2)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_CNAK;
|
|
USBx_OUTEP(3)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_CNAK;
|
|
|
|
USB_WritePacket(0, 0, 0);
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
break;
|
|
case USB_REQ_SET_ADDRESS:
|
|
// set now?
|
|
USBx_DEVICE->DCFG |= ((setup.b.wValue.w & 0x7fU) << 4);
|
|
|
|
#ifdef DEBUG_USB
|
|
puts(" set address\n");
|
|
#endif
|
|
|
|
// TODO: this isn't enumeration complete
|
|
// moved here to work better on OS X
|
|
usb_cb_enumeration_complete();
|
|
|
|
USB_WritePacket(0, 0, 0);
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
|
|
break;
|
|
case USB_REQ_GET_DESCRIPTOR:
|
|
switch (setup.b.wValue.bw.lsb) {
|
|
case USB_DESC_TYPE_DEVICE:
|
|
//puts(" writing device descriptor\n");
|
|
|
|
// setup transfer
|
|
USB_WritePacket(device_desc, MIN(sizeof(device_desc), setup.b.wLength.w), 0);
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
|
|
//puts("D");
|
|
break;
|
|
case USB_DESC_TYPE_CONFIGURATION:
|
|
USB_WritePacket(configuration_desc, MIN(sizeof(configuration_desc), setup.b.wLength.w), 0);
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
break;
|
|
case USB_DESC_TYPE_DEVICE_QUALIFIER:
|
|
USB_WritePacket(device_qualifier, MIN(sizeof(device_qualifier), setup.b.wLength.w), 0);
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
break;
|
|
case USB_DESC_TYPE_STRING:
|
|
switch (setup.b.wValue.bw.msb) {
|
|
case STRING_OFFSET_LANGID:
|
|
USB_WritePacket((uint8_t*)string_language_desc, MIN(sizeof(string_language_desc), setup.b.wLength.w), 0);
|
|
break;
|
|
case STRING_OFFSET_IMANUFACTURER:
|
|
USB_WritePacket((uint8_t*)string_manufacturer_desc, MIN(sizeof(string_manufacturer_desc), setup.b.wLength.w), 0);
|
|
break;
|
|
case STRING_OFFSET_IPRODUCT:
|
|
USB_WritePacket((uint8_t*)string_product_desc, MIN(sizeof(string_product_desc), setup.b.wLength.w), 0);
|
|
break;
|
|
case STRING_OFFSET_ISERIAL:
|
|
#ifdef UID_BASE
|
|
resp[0] = 0x02 + (12 * 4);
|
|
resp[1] = 0x03;
|
|
|
|
// 96 bits = 12 bytes
|
|
for (int i = 0; i < 12; i++){
|
|
uint8_t cc = ((uint8_t *)UID_BASE)[i];
|
|
resp[2 + (i * 4) + 0] = to_hex_char((cc >> 4) & 0xFU);
|
|
resp[2 + (i * 4) + 1] = '\0';
|
|
resp[2 + (i * 4) + 2] = to_hex_char((cc >> 0) & 0xFU);
|
|
resp[2 + (i * 4) + 3] = '\0';
|
|
}
|
|
|
|
USB_WritePacket(resp, MIN(resp[0], setup.b.wLength.w), 0);
|
|
#else
|
|
USB_WritePacket((const uint8_t *)string_serial_desc, MIN(sizeof(string_serial_desc), setup.b.wLength.w), 0);
|
|
#endif
|
|
break;
|
|
case STRING_OFFSET_ICONFIGURATION:
|
|
USB_WritePacket((uint8_t*)string_configuration_desc, MIN(sizeof(string_configuration_desc), setup.b.wLength.w), 0);
|
|
break;
|
|
case 238:
|
|
USB_WritePacket((uint8_t*)string_238_desc, MIN(sizeof(string_238_desc), setup.b.wLength.w), 0);
|
|
break;
|
|
default:
|
|
// nothing
|
|
USB_WritePacket(0, 0, 0);
|
|
break;
|
|
}
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
break;
|
|
case USB_DESC_TYPE_BINARY_OBJECT_STORE:
|
|
USB_WritePacket(binary_object_store_desc, MIN(sizeof(binary_object_store_desc), setup.b.wLength.w), 0);
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
break;
|
|
default:
|
|
// nothing here?
|
|
USB_WritePacket(0, 0, 0);
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
break;
|
|
}
|
|
break;
|
|
case USB_REQ_GET_STATUS:
|
|
// empty resp?
|
|
resp[0] = 0;
|
|
resp[1] = 0;
|
|
USB_WritePacket((void*)&resp, 2, 0);
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
break;
|
|
case USB_REQ_SET_INTERFACE:
|
|
// Store the alt setting number for IN EP behavior.
|
|
current_int0_alt_setting = setup.b.wValue.w;
|
|
USB_WritePacket(0, 0, 0);
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
break;
|
|
case WEBUSB_VENDOR_CODE:
|
|
switch (setup.b.wIndex.w) {
|
|
case WEBUSB_REQ_GET_URL:
|
|
USB_WritePacket(webusb_url_descriptor, MIN(sizeof(webusb_url_descriptor), setup.b.wLength.w), 0);
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
break;
|
|
default:
|
|
// probably asking for allowed origins, which was removed from the spec
|
|
USB_WritePacket(0, 0, 0);
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
break;
|
|
}
|
|
break;
|
|
case MS_VENDOR_CODE:
|
|
switch (setup.b.wIndex.w) {
|
|
// winusb 2.0 descriptor from BOS
|
|
case WINUSB_REQ_GET_DESCRIPTOR:
|
|
USB_WritePacket_EP0((uint8_t*)winusb_20_desc, MIN(sizeof(winusb_20_desc), setup.b.wLength.w));
|
|
break;
|
|
// Extended Compat ID OS Descriptor
|
|
case WINUSB_REQ_GET_COMPATID_DESCRIPTOR:
|
|
USB_WritePacket_EP0((uint8_t*)winusb_ext_compatid_os_desc, MIN(sizeof(winusb_ext_compatid_os_desc), setup.b.wLength.w));
|
|
break;
|
|
// Extended Properties OS Descriptor
|
|
case WINUSB_REQ_GET_EXT_PROPS_OS:
|
|
USB_WritePacket_EP0((uint8_t*)winusb_ext_prop_os_desc, MIN(sizeof(winusb_ext_prop_os_desc), setup.b.wLength.w));
|
|
break;
|
|
default:
|
|
USB_WritePacket_EP0(0, 0);
|
|
}
|
|
break;
|
|
default:
|
|
resp_len = usb_cb_control_msg(&setup, resp, 1);
|
|
USB_WritePacket(resp, MIN(resp_len, setup.b.wLength.w), 0);
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
}
|
|
}
|
|
|
|
void usb_init(void) {
|
|
// full speed PHY, do reset and remove power down
|
|
/*puth(USBx->GRSTCTL);
|
|
puts(" resetting PHY\n");*/
|
|
while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0);
|
|
//puts("AHB idle\n");
|
|
|
|
// reset PHY here
|
|
USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST;
|
|
while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST);
|
|
//puts("reset done\n");
|
|
|
|
// internal PHY, force device mode
|
|
USBx->GUSBCFG = USB_OTG_GUSBCFG_PHYSEL | USB_OTG_GUSBCFG_FDMOD;
|
|
|
|
// slowest timings
|
|
USBx->GUSBCFG |= ((USBD_FS_TRDT_VALUE << 10) & USB_OTG_GUSBCFG_TRDT);
|
|
|
|
// power up the PHY
|
|
#ifdef STM32F4
|
|
USBx->GCCFG = USB_OTG_GCCFG_PWRDWN;
|
|
|
|
//USBx->GCCFG |= USB_OTG_GCCFG_VBDEN | USB_OTG_GCCFG_SDEN |USB_OTG_GCCFG_PDEN | USB_OTG_GCCFG_DCDEN;
|
|
|
|
/* B-peripheral session valid override enable*/
|
|
USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
|
|
USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
|
|
#else
|
|
USBx->GCCFG = USB_OTG_GCCFG_PWRDWN | USB_OTG_GCCFG_NOVBUSSENS;
|
|
#endif
|
|
|
|
// be a device, slowest timings
|
|
//USBx->GUSBCFG = USB_OTG_GUSBCFG_FDMOD | USB_OTG_GUSBCFG_PHYSEL | USB_OTG_GUSBCFG_TRDT | USB_OTG_GUSBCFG_TOCAL;
|
|
//USBx->GUSBCFG |= (uint32_t)((USBD_FS_TRDT_VALUE << 10) & USB_OTG_GUSBCFG_TRDT);
|
|
//USBx->GUSBCFG = USB_OTG_GUSBCFG_PHYSEL | USB_OTG_GUSBCFG_TRDT | USB_OTG_GUSBCFG_TOCAL;
|
|
|
|
// **** for debugging, doesn't seem to work ****
|
|
//USBx->GUSBCFG |= USB_OTG_GUSBCFG_CTXPKT;
|
|
|
|
// reset PHY clock
|
|
USBx_PCGCCTL = 0;
|
|
|
|
// enable the fancy OTG things
|
|
// DCFG_FRAME_INTERVAL_80 is 0
|
|
//USBx->GUSBCFG |= USB_OTG_GUSBCFG_HNPCAP | USB_OTG_GUSBCFG_SRPCAP;
|
|
USBx_DEVICE->DCFG |= USB_OTG_SPEED_FULL | USB_OTG_DCFG_NZLSOHSK;
|
|
|
|
//USBx_DEVICE->DCFG = USB_OTG_DCFG_NZLSOHSK | USB_OTG_DCFG_DSPD;
|
|
//USBx_DEVICE->DCFG = USB_OTG_DCFG_DSPD;
|
|
|
|
// clear pending interrupts
|
|
USBx->GINTSTS = 0xBFFFFFFFU;
|
|
|
|
// setup USB interrupts
|
|
// all interrupts except TXFIFO EMPTY
|
|
//USBx->GINTMSK = 0xFFFFFFFF & ~(USB_OTG_GINTMSK_NPTXFEM | USB_OTG_GINTMSK_PTXFEM | USB_OTG_GINTSTS_SOF | USB_OTG_GINTSTS_EOPF);
|
|
//USBx->GINTMSK = 0xFFFFFFFF & ~(USB_OTG_GINTMSK_NPTXFEM | USB_OTG_GINTMSK_PTXFEM);
|
|
USBx->GINTMSK = USB_OTG_GINTMSK_USBRST | USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_OTGINT |
|
|
USB_OTG_GINTMSK_RXFLVLM | USB_OTG_GINTMSK_GONAKEFFM | USB_OTG_GINTMSK_GINAKEFFM |
|
|
USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IEPINT | USB_OTG_GINTMSK_USBSUSPM |
|
|
USB_OTG_GINTMSK_CIDSCHGM | USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_MMISM;
|
|
|
|
USBx->GAHBCFG = USB_OTG_GAHBCFG_GINT;
|
|
|
|
// DCTL startup value is 2 on new chip, 0 on old chip
|
|
USBx_DEVICE->DCTL = 0;
|
|
|
|
// enable the IRQ
|
|
NVIC_EnableIRQ(OTG_FS_IRQn);
|
|
}
|
|
|
|
// ***************************** USB port *****************************
|
|
|
|
void usb_irqhandler(void) {
|
|
//USBx->GINTMSK = 0;
|
|
|
|
unsigned int gintsts = USBx->GINTSTS;
|
|
unsigned int gotgint = USBx->GOTGINT;
|
|
unsigned int daint = USBx_DEVICE->DAINT;
|
|
|
|
// gintsts SUSPEND? 04008428
|
|
#ifdef DEBUG_USB
|
|
puth(gintsts);
|
|
puts(" ");
|
|
/*puth(USBx->GCCFG);
|
|
puts(" ");*/
|
|
puth(gotgint);
|
|
puts(" ep ");
|
|
puth(daint);
|
|
puts(" USB interrupt!\n");
|
|
#endif
|
|
|
|
if ((gintsts & USB_OTG_GINTSTS_CIDSCHG) != 0) {
|
|
puts("connector ID status change\n");
|
|
}
|
|
|
|
if ((gintsts & USB_OTG_GINTSTS_ESUSP) != 0) {
|
|
puts("ESUSP detected\n");
|
|
}
|
|
|
|
if ((gintsts & USB_OTG_GINTSTS_USBRST) != 0) {
|
|
puts("USB reset\n");
|
|
usb_reset();
|
|
}
|
|
|
|
if ((gintsts & USB_OTG_GINTSTS_ENUMDNE) != 0) {
|
|
puts("enumeration done");
|
|
// Full speed, ENUMSPD
|
|
//puth(USBx_DEVICE->DSTS);
|
|
puts("\n");
|
|
}
|
|
|
|
if ((gintsts & USB_OTG_GINTSTS_OTGINT) != 0) {
|
|
puts("OTG int:");
|
|
puth(USBx->GOTGINT);
|
|
puts("\n");
|
|
|
|
// getting ADTOCHG
|
|
//USBx->GOTGINT = USBx->GOTGINT;
|
|
}
|
|
|
|
// RX FIFO first
|
|
if ((gintsts & USB_OTG_GINTSTS_RXFLVL) != 0) {
|
|
// 1. Read the Receive status pop register
|
|
volatile unsigned int rxst = USBx->GRXSTSP;
|
|
int status = (rxst & USB_OTG_GRXSTSP_PKTSTS) >> 17;
|
|
|
|
#ifdef DEBUG_USB
|
|
puts(" RX FIFO:");
|
|
puth(rxst);
|
|
puts(" status: ");
|
|
puth(status);
|
|
puts(" len: ");
|
|
puth((rxst & USB_OTG_GRXSTSP_BCNT) >> 4);
|
|
puts("\n");
|
|
#endif
|
|
|
|
if (status == STS_DATA_UPDT) {
|
|
int endpoint = (rxst & USB_OTG_GRXSTSP_EPNUM);
|
|
int len = (rxst & USB_OTG_GRXSTSP_BCNT) >> 4;
|
|
(void)USB_ReadPacket(&usbdata, len);
|
|
#ifdef DEBUG_USB
|
|
puts(" data ");
|
|
puth(len);
|
|
puts("\n");
|
|
hexdump(&usbdata, len);
|
|
#endif
|
|
|
|
if (endpoint == 2) {
|
|
usb_cb_ep2_out(usbdata, len, 1);
|
|
}
|
|
|
|
if (endpoint == 3) {
|
|
usb_cb_ep3_out(usbdata, len, 1);
|
|
}
|
|
} else if (status == STS_SETUP_UPDT) {
|
|
(void)USB_ReadPacket(&setup, 8);
|
|
#ifdef DEBUG_USB
|
|
puts(" setup ");
|
|
hexdump(&setup, 8);
|
|
puts("\n");
|
|
#endif
|
|
} else {
|
|
// status is neither STS_DATA_UPDT or STS_SETUP_UPDT, skip
|
|
}
|
|
}
|
|
|
|
/*if (gintsts & USB_OTG_GINTSTS_HPRTINT) {
|
|
// host
|
|
puts("HPRT:");
|
|
puth(USBx_HOST_PORT->HPRT);
|
|
puts("\n");
|
|
if (USBx_HOST_PORT->HPRT & USB_OTG_HPRT_PCDET) {
|
|
USBx_HOST_PORT->HPRT |= USB_OTG_HPRT_PRST;
|
|
USBx_HOST_PORT->HPRT |= USB_OTG_HPRT_PCDET;
|
|
}
|
|
|
|
}*/
|
|
|
|
if ((gintsts & USB_OTG_GINTSTS_BOUTNAKEFF) || (gintsts & USB_OTG_GINTSTS_GINAKEFF)) {
|
|
// no global NAK, why is this getting set?
|
|
#ifdef DEBUG_USB
|
|
puts("GLOBAL NAK\n");
|
|
#endif
|
|
USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGONAK | USB_OTG_DCTL_CGINAK;
|
|
}
|
|
|
|
if ((gintsts & USB_OTG_GINTSTS_SRQINT) != 0) {
|
|
// we want to do "A-device host negotiation protocol" since we are the A-device
|
|
/*puts("start request\n");
|
|
puth(USBx->GOTGCTL);
|
|
puts("\n");*/
|
|
//USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
|
|
//USBx_HOST_PORT->HPRT = USB_OTG_HPRT_PPWR | USB_OTG_HPRT_PENA;
|
|
//USBx->GOTGCTL |= USB_OTG_GOTGCTL_SRQ;
|
|
}
|
|
|
|
// out endpoint hit
|
|
if ((gintsts & USB_OTG_GINTSTS_OEPINT) != 0) {
|
|
#ifdef DEBUG_USB
|
|
puts(" 0:");
|
|
puth(USBx_OUTEP(0)->DOEPINT);
|
|
puts(" 2:");
|
|
puth(USBx_OUTEP(2)->DOEPINT);
|
|
puts(" 3:");
|
|
puth(USBx_OUTEP(3)->DOEPINT);
|
|
puts(" ");
|
|
puth(USBx_OUTEP(3)->DOEPCTL);
|
|
puts(" 4:");
|
|
puth(USBx_OUTEP(4)->DOEPINT);
|
|
puts(" OUT ENDPOINT\n");
|
|
#endif
|
|
|
|
if ((USBx_OUTEP(2)->DOEPINT & USB_OTG_DOEPINT_XFRC) != 0) {
|
|
#ifdef DEBUG_USB
|
|
puts(" OUT2 PACKET XFRC\n");
|
|
#endif
|
|
USBx_OUTEP(2)->DOEPTSIZ = (1U << 19) | 0x40U;
|
|
USBx_OUTEP(2)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_CNAK;
|
|
}
|
|
|
|
if ((USBx_OUTEP(3)->DOEPINT & USB_OTG_DOEPINT_XFRC) != 0) {
|
|
#ifdef DEBUG_USB
|
|
puts(" OUT3 PACKET XFRC\n");
|
|
#endif
|
|
USBx_OUTEP(3)->DOEPTSIZ = (1U << 19) | 0x40U;
|
|
USBx_OUTEP(3)->DOEPCTL |= USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_CNAK;
|
|
} else if ((USBx_OUTEP(3)->DOEPINT & 0x2000) != 0) {
|
|
#ifdef DEBUG_USB
|
|
puts(" OUT3 PACKET WTF\n");
|
|
#endif
|
|
// if NAK was set trigger this, unknown interrupt
|
|
USBx_OUTEP(3)->DOEPTSIZ = (1U << 19) | 0x40U;
|
|
USBx_OUTEP(3)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
} else if ((USBx_OUTEP(3)->DOEPINT) != 0) {
|
|
puts("OUTEP3 error ");
|
|
puth(USBx_OUTEP(3)->DOEPINT);
|
|
puts("\n");
|
|
} else {
|
|
// USBx_OUTEP(3)->DOEPINT is 0, ok to skip
|
|
}
|
|
|
|
if ((USBx_OUTEP(0)->DOEPINT & USB_OTG_DIEPINT_XFRC) != 0) {
|
|
// ready for next packet
|
|
USBx_OUTEP(0)->DOEPTSIZ = USB_OTG_DOEPTSIZ_STUPCNT | (USB_OTG_DOEPTSIZ_PKTCNT & (1U << 19)) | (1U << 3);
|
|
}
|
|
|
|
// respond to setup packets
|
|
if ((USBx_OUTEP(0)->DOEPINT & USB_OTG_DOEPINT_STUP) != 0) {
|
|
usb_setup();
|
|
}
|
|
|
|
USBx_OUTEP(0)->DOEPINT = USBx_OUTEP(0)->DOEPINT;
|
|
USBx_OUTEP(2)->DOEPINT = USBx_OUTEP(2)->DOEPINT;
|
|
USBx_OUTEP(3)->DOEPINT = USBx_OUTEP(3)->DOEPINT;
|
|
}
|
|
|
|
// interrupt endpoint hit (Page 1221)
|
|
if ((gintsts & USB_OTG_GINTSTS_IEPINT) != 0) {
|
|
#ifdef DEBUG_USB
|
|
puts(" ");
|
|
puth(USBx_INEP(0)->DIEPINT);
|
|
puts(" ");
|
|
puth(USBx_INEP(1)->DIEPINT);
|
|
puts(" IN ENDPOINT\n");
|
|
#endif
|
|
|
|
// Should likely check the EP of the IN request even if there is
|
|
// only one IN endpoint.
|
|
|
|
// No need to set NAK in OTG_DIEPCTL0 when nothing to send,
|
|
// Appears USB core automatically sets NAK. WritePacket clears it.
|
|
|
|
// Handle the two interface alternate settings. Setting 0 has EP1
|
|
// as bulk. Setting 1 has EP1 as interrupt. The code to handle
|
|
// these two EP variations are very similar and can be
|
|
// restructured for smaller code footprint. Keeping split out for
|
|
// now for clarity.
|
|
|
|
//TODO add default case. Should it NAK?
|
|
switch (current_int0_alt_setting) {
|
|
case 0: ////// Bulk config
|
|
// *** IN token received when TxFIFO is empty
|
|
if ((USBx_INEP(1)->DIEPINT & USB_OTG_DIEPMSK_ITTXFEMSK) != 0) {
|
|
#ifdef DEBUG_USB
|
|
puts(" IN PACKET QUEUE\n");
|
|
#endif
|
|
// TODO: always assuming max len, can we get the length?
|
|
USB_WritePacket((void *)resp, usb_cb_ep1_in(resp, 0x40, 1), 1);
|
|
}
|
|
break;
|
|
|
|
case 1: ////// Interrupt config
|
|
// *** IN token received when TxFIFO is empty
|
|
if ((USBx_INEP(1)->DIEPINT & USB_OTG_DIEPMSK_ITTXFEMSK) != 0) {
|
|
#ifdef DEBUG_USB
|
|
puts(" IN PACKET QUEUE\n");
|
|
#endif
|
|
// TODO: always assuming max len, can we get the length?
|
|
int len = usb_cb_ep1_in(resp, 0x40, 1);
|
|
if (len > 0) {
|
|
USB_WritePacket((void *)resp, len, 1);
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
puts("current_int0_alt_setting value invalid\n");
|
|
break;
|
|
}
|
|
|
|
if ((USBx_INEP(0)->DIEPINT & USB_OTG_DIEPMSK_ITTXFEMSK) != 0) {
|
|
#ifdef DEBUG_USB
|
|
puts(" IN PACKET QUEUE\n");
|
|
#endif
|
|
|
|
if ((ep0_txlen != 0U) && ((USBx_INEP(0)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) >= 0x40U)) {
|
|
uint16_t len = MIN(ep0_txlen, 0x40);
|
|
USB_WritePacket(ep0_txdata, len, 0);
|
|
ep0_txdata = &ep0_txdata[len];
|
|
ep0_txlen -= len;
|
|
if (ep0_txlen == 0U) {
|
|
ep0_txdata = NULL;
|
|
USBx_DEVICE->DIEPEMPMSK &= ~1;
|
|
USBx_OUTEP(0)->DOEPCTL |= USB_OTG_DOEPCTL_CNAK;
|
|
}
|
|
}
|
|
}
|
|
|
|
// clear interrupts
|
|
USBx_INEP(0)->DIEPINT = USBx_INEP(0)->DIEPINT; // Why ep0?
|
|
USBx_INEP(1)->DIEPINT = USBx_INEP(1)->DIEPINT;
|
|
}
|
|
|
|
// clear all interrupts we handled
|
|
USBx_DEVICE->DAINT = daint;
|
|
USBx->GOTGINT = gotgint;
|
|
USBx->GINTSTS = gintsts;
|
|
|
|
//USBx->GINTMSK = 0xFFFFFFFF & ~(USB_OTG_GINTMSK_NPTXFEM | USB_OTG_GINTMSK_PTXFEM | USB_OTG_GINTSTS_SOF | USB_OTG_GINTSTS_EOPF);
|
|
}
|
|
|
|
void OTG_FS_IRQHandler(void) {
|
|
NVIC_DisableIRQ(OTG_FS_IRQn);
|
|
//__disable_irq();
|
|
usb_irqhandler();
|
|
//__enable_irq();
|
|
NVIC_EnableIRQ(OTG_FS_IRQn);
|
|
}
|
|
|
|
|