You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
236 lines
8.9 KiB
236 lines
8.9 KiB
from dataclasses import dataclass, field
|
|
from enum import Enum
|
|
|
|
from cereal import car
|
|
from openpilot.selfdrive.car import dbc_dict, PlatformConfig, DbcDict, Platforms, CarSpecs
|
|
from openpilot.selfdrive.car.docs_definitions import CarFootnote, CarHarness, CarDocs, CarParts, Column
|
|
from openpilot.selfdrive.car.fw_query_definitions import FwQueryConfig, Request, StdQueries
|
|
|
|
Ecu = car.CarParams.Ecu
|
|
|
|
|
|
class CarControllerParams:
|
|
STEER_MAX = 300 # GM limit is 3Nm. Used by carcontroller to generate LKA output
|
|
STEER_STEP = 3 # Active control frames per command (~33hz)
|
|
INACTIVE_STEER_STEP = 10 # Inactive control frames per command (10hz)
|
|
STEER_DELTA_UP = 10 # Delta rates require review due to observed EPS weakness
|
|
STEER_DELTA_DOWN = 15
|
|
STEER_DRIVER_ALLOWANCE = 65
|
|
STEER_DRIVER_MULTIPLIER = 4
|
|
STEER_DRIVER_FACTOR = 100
|
|
NEAR_STOP_BRAKE_PHASE = 0.5 # m/s
|
|
|
|
# Heartbeat for dash "Service Adaptive Cruise" and "Service Front Camera"
|
|
ADAS_KEEPALIVE_STEP = 100
|
|
CAMERA_KEEPALIVE_STEP = 100
|
|
|
|
# Allow small margin below -3.5 m/s^2 from ISO 15622:2018 since we
|
|
# perform the closed loop control, and might need some
|
|
# to apply some more braking if we're on a downhill slope.
|
|
# Our controller should still keep the 2 second average above
|
|
# -3.5 m/s^2 as per planner limits
|
|
ACCEL_MAX = 2. # m/s^2
|
|
ACCEL_MIN = -4. # m/s^2
|
|
|
|
def __init__(self, CP):
|
|
# Gas/brake lookups
|
|
self.ZERO_GAS = 2048 # Coasting
|
|
self.MAX_BRAKE = 400 # ~ -4.0 m/s^2 with regen
|
|
|
|
if CP.carFingerprint in CAMERA_ACC_CAR:
|
|
self.MAX_GAS = 3400
|
|
self.MAX_ACC_REGEN = 1514
|
|
self.INACTIVE_REGEN = 1554
|
|
# Camera ACC vehicles have no regen while enabled.
|
|
# Camera transitions to MAX_ACC_REGEN from ZERO_GAS and uses friction brakes instantly
|
|
max_regen_acceleration = 0.
|
|
|
|
else:
|
|
self.MAX_GAS = 3072 # Safety limit, not ACC max. Stock ACC >4096 from standstill.
|
|
self.MAX_ACC_REGEN = 1404 # Max ACC regen is slightly less than max paddle regen
|
|
self.INACTIVE_REGEN = 1404
|
|
# ICE has much less engine braking force compared to regen in EVs,
|
|
# lower threshold removes some braking deadzone
|
|
max_regen_acceleration = -1. if CP.carFingerprint in EV_CAR else -0.1
|
|
|
|
self.GAS_LOOKUP_BP = [max_regen_acceleration, 0., self.ACCEL_MAX]
|
|
self.GAS_LOOKUP_V = [self.MAX_ACC_REGEN, self.ZERO_GAS, self.MAX_GAS]
|
|
|
|
self.BRAKE_LOOKUP_BP = [self.ACCEL_MIN, max_regen_acceleration]
|
|
self.BRAKE_LOOKUP_V = [self.MAX_BRAKE, 0.]
|
|
|
|
|
|
class Footnote(Enum):
|
|
OBD_II = CarFootnote(
|
|
'Requires a <a href="https://github.com/commaai/openpilot/wiki/GM#hardware" target="_blank">community built ASCM harness</a>. ' +
|
|
'<b><i>NOTE: disconnecting the ASCM disables Automatic Emergency Braking (AEB).</i></b>',
|
|
Column.MODEL)
|
|
|
|
|
|
@dataclass
|
|
class GMCarDocs(CarDocs):
|
|
package: str = "Adaptive Cruise Control (ACC)"
|
|
|
|
def init_make(self, CP: car.CarParams):
|
|
if CP.networkLocation == car.CarParams.NetworkLocation.fwdCamera:
|
|
self.car_parts = CarParts.common([CarHarness.gm])
|
|
else:
|
|
self.car_parts = CarParts.common([CarHarness.obd_ii])
|
|
self.footnotes.append(Footnote.OBD_II)
|
|
|
|
|
|
@dataclass(frozen=True, kw_only=True)
|
|
class GMCarSpecs(CarSpecs):
|
|
tireStiffnessFactor: float = 0.444 # not optimized yet
|
|
|
|
|
|
@dataclass
|
|
class GMPlatformConfig(PlatformConfig):
|
|
dbc_dict: DbcDict = field(default_factory=lambda: dbc_dict('gm_global_a_powertrain_generated', 'gm_global_a_object', chassis_dbc='gm_global_a_chassis'))
|
|
|
|
|
|
class CAR(Platforms):
|
|
HOLDEN_ASTRA = GMPlatformConfig(
|
|
[GMCarDocs("Holden Astra 2017")],
|
|
GMCarSpecs(mass=1363, wheelbase=2.662, steerRatio=15.7, centerToFrontRatio=0.4),
|
|
)
|
|
CHEVROLET_VOLT = GMPlatformConfig(
|
|
[GMCarDocs("Chevrolet Volt 2017-18", min_enable_speed=0, video_link="https://youtu.be/QeMCN_4TFfQ")],
|
|
GMCarSpecs(mass=1607, wheelbase=2.69, steerRatio=17.7, centerToFrontRatio=0.45, tireStiffnessFactor=0.469),
|
|
)
|
|
CADILLAC_ATS = GMPlatformConfig(
|
|
[GMCarDocs("Cadillac ATS Premium Performance 2018")],
|
|
GMCarSpecs(mass=1601, wheelbase=2.78, steerRatio=15.3),
|
|
)
|
|
CHEVROLET_MALIBU = GMPlatformConfig(
|
|
[GMCarDocs("Chevrolet Malibu Premier 2017")],
|
|
GMCarSpecs(mass=1496, wheelbase=2.83, steerRatio=15.8, centerToFrontRatio=0.4),
|
|
)
|
|
GMC_ACADIA = GMPlatformConfig(
|
|
[GMCarDocs("GMC Acadia 2018", video_link="https://www.youtube.com/watch?v=0ZN6DdsBUZo")],
|
|
GMCarSpecs(mass=1975, wheelbase=2.86, steerRatio=14.4, centerToFrontRatio=0.4),
|
|
)
|
|
BUICK_LACROSSE = GMPlatformConfig(
|
|
[GMCarDocs("Buick LaCrosse 2017-19", "Driver Confidence Package 2")],
|
|
GMCarSpecs(mass=1712, wheelbase=2.91, steerRatio=15.8, centerToFrontRatio=0.4),
|
|
)
|
|
BUICK_REGAL = GMPlatformConfig(
|
|
[GMCarDocs("Buick Regal Essence 2018")],
|
|
GMCarSpecs(mass=1714, wheelbase=2.83, steerRatio=14.4, centerToFrontRatio=0.4),
|
|
)
|
|
CADILLAC_ESCALADE = GMPlatformConfig(
|
|
[GMCarDocs("Cadillac Escalade 2017", "Driver Assist Package")],
|
|
GMCarSpecs(mass=2564, wheelbase=2.95, steerRatio=17.3),
|
|
)
|
|
CADILLAC_ESCALADE_ESV = GMPlatformConfig(
|
|
[GMCarDocs("Cadillac Escalade ESV 2016", "Adaptive Cruise Control (ACC) & LKAS")],
|
|
GMCarSpecs(mass=2739, wheelbase=3.302, steerRatio=17.3, tireStiffnessFactor=1.0),
|
|
)
|
|
CADILLAC_ESCALADE_ESV_2019 = GMPlatformConfig(
|
|
[GMCarDocs("Cadillac Escalade ESV 2019", "Adaptive Cruise Control (ACC) & LKAS")],
|
|
CADILLAC_ESCALADE_ESV.specs,
|
|
)
|
|
CHEVROLET_BOLT_EUV = GMPlatformConfig(
|
|
[
|
|
GMCarDocs("Chevrolet Bolt EUV 2022-23", "Premier or Premier Redline Trim without Super Cruise Package", video_link="https://youtu.be/xvwzGMUA210"),
|
|
GMCarDocs("Chevrolet Bolt EV 2022-23", "2LT Trim with Adaptive Cruise Control Package"),
|
|
],
|
|
GMCarSpecs(mass=1669, wheelbase=2.63779, steerRatio=16.8, centerToFrontRatio=0.4, tireStiffnessFactor=1.0),
|
|
)
|
|
CHEVROLET_SILVERADO = GMPlatformConfig(
|
|
[
|
|
GMCarDocs("Chevrolet Silverado 1500 2020-21", "Safety Package II"),
|
|
GMCarDocs("GMC Sierra 1500 2020-21", "Driver Alert Package II", video_link="https://youtu.be/5HbNoBLzRwE"),
|
|
],
|
|
GMCarSpecs(mass=2450, wheelbase=3.75, steerRatio=16.3, tireStiffnessFactor=1.0),
|
|
)
|
|
CHEVROLET_EQUINOX = GMPlatformConfig(
|
|
[GMCarDocs("Chevrolet Equinox 2019-22")],
|
|
GMCarSpecs(mass=1588, wheelbase=2.72, steerRatio=14.4, centerToFrontRatio=0.4),
|
|
)
|
|
CHEVROLET_TRAILBLAZER = GMPlatformConfig(
|
|
[GMCarDocs("Chevrolet Trailblazer 2021-22")],
|
|
GMCarSpecs(mass=1345, wheelbase=2.64, steerRatio=16.8, centerToFrontRatio=0.4, tireStiffnessFactor=1.0),
|
|
)
|
|
|
|
|
|
class CruiseButtons:
|
|
INIT = 0
|
|
UNPRESS = 1
|
|
RES_ACCEL = 2
|
|
DECEL_SET = 3
|
|
MAIN = 5
|
|
CANCEL = 6
|
|
|
|
class AccState:
|
|
OFF = 0
|
|
ACTIVE = 1
|
|
FAULTED = 3
|
|
STANDSTILL = 4
|
|
|
|
class CanBus:
|
|
POWERTRAIN = 0
|
|
OBSTACLE = 1
|
|
CAMERA = 2
|
|
CHASSIS = 2
|
|
LOOPBACK = 128
|
|
DROPPED = 192
|
|
|
|
|
|
# In a Data Module, an identifier is a string used to recognize an object,
|
|
# either by itself or together with the identifiers of parent objects.
|
|
# Each returns a 4 byte hex representation of the decimal part number. `b"\x02\x8c\xf0'"` -> 42790951
|
|
GM_BOOT_SOFTWARE_PART_NUMER_REQUEST = b'\x1a\xc0' # likely does not contain anything useful
|
|
GM_SOFTWARE_MODULE_1_REQUEST = b'\x1a\xc1'
|
|
GM_SOFTWARE_MODULE_2_REQUEST = b'\x1a\xc2'
|
|
GM_SOFTWARE_MODULE_3_REQUEST = b'\x1a\xc3'
|
|
|
|
# Part number of XML data file that is used to configure ECU
|
|
GM_XML_DATA_FILE_PART_NUMBER = b'\x1a\x9c'
|
|
GM_XML_CONFIG_COMPAT_ID = b'\x1a\x9b' # used to know if XML file is compatible with the ECU software/hardware
|
|
|
|
# This DID is for identifying the part number that reflects the mix of hardware,
|
|
# software, and calibrations in the ECU when it first arrives at the vehicle assembly plant.
|
|
# If there's an Alpha Code, it's associated with this part number and stored in the DID $DB.
|
|
GM_END_MODEL_PART_NUMBER_REQUEST = b'\x1a\xcb'
|
|
GM_END_MODEL_PART_NUMBER_ALPHA_CODE_REQUEST = b'\x1a\xdb'
|
|
GM_BASE_MODEL_PART_NUMBER_REQUEST = b'\x1a\xcc'
|
|
GM_BASE_MODEL_PART_NUMBER_ALPHA_CODE_REQUEST = b'\x1a\xdc'
|
|
GM_FW_RESPONSE = b'\x5a'
|
|
|
|
GM_FW_REQUESTS = [
|
|
GM_BOOT_SOFTWARE_PART_NUMER_REQUEST,
|
|
GM_SOFTWARE_MODULE_1_REQUEST,
|
|
GM_SOFTWARE_MODULE_2_REQUEST,
|
|
GM_SOFTWARE_MODULE_3_REQUEST,
|
|
GM_XML_DATA_FILE_PART_NUMBER,
|
|
GM_XML_CONFIG_COMPAT_ID,
|
|
GM_END_MODEL_PART_NUMBER_REQUEST,
|
|
GM_END_MODEL_PART_NUMBER_ALPHA_CODE_REQUEST,
|
|
GM_BASE_MODEL_PART_NUMBER_REQUEST,
|
|
GM_BASE_MODEL_PART_NUMBER_ALPHA_CODE_REQUEST,
|
|
]
|
|
|
|
GM_RX_OFFSET = 0x400
|
|
|
|
FW_QUERY_CONFIG = FwQueryConfig(
|
|
requests=[request for req in GM_FW_REQUESTS for request in [
|
|
Request(
|
|
[StdQueries.SHORT_TESTER_PRESENT_REQUEST, req],
|
|
[StdQueries.SHORT_TESTER_PRESENT_RESPONSE, GM_FW_RESPONSE + bytes([req[-1]])],
|
|
rx_offset=GM_RX_OFFSET,
|
|
bus=0,
|
|
logging=True,
|
|
),
|
|
]],
|
|
extra_ecus=[(Ecu.fwdCamera, 0x24b, None)],
|
|
)
|
|
|
|
EV_CAR = {CAR.CHEVROLET_VOLT, CAR.CHEVROLET_BOLT_EUV}
|
|
|
|
# We're integrated at the camera with VOACC on these cars (instead of ASCM w/ OBD-II harness)
|
|
CAMERA_ACC_CAR = {CAR.CHEVROLET_BOLT_EUV, CAR.CHEVROLET_SILVERADO, CAR.CHEVROLET_EQUINOX, CAR.CHEVROLET_TRAILBLAZER}
|
|
|
|
STEER_THRESHOLD = 1.0
|
|
|
|
DBC = CAR.create_dbc_map()
|
|
|