You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
363 lines
9.7 KiB
363 lines
9.7 KiB
// IRQs: CAN1_TX, CAN1_RX0, CAN1_SCE
|
|
// CAN2_TX, CAN2_RX0, CAN2_SCE
|
|
// CAN3_TX, CAN3_RX0, CAN3_SCE
|
|
|
|
typedef struct {
|
|
volatile uint32_t w_ptr;
|
|
volatile uint32_t r_ptr;
|
|
uint32_t fifo_size;
|
|
CAN_FIFOMailBox_TypeDef *elems;
|
|
} can_ring;
|
|
|
|
#define CAN_BUS_RET_FLAG 0x80
|
|
#define CAN_BUS_NUM_MASK 0x7F
|
|
|
|
#define BUS_MAX 4
|
|
|
|
extern int can_live, pending_can_live;
|
|
|
|
// must reinit after changing these
|
|
extern int can_loopback, can_silent;
|
|
extern uint32_t can_speed[4];
|
|
|
|
void can_set_forwarding(int from, int to);
|
|
|
|
void can_init(uint8_t can_number);
|
|
void can_init_all(void);
|
|
void can_send(CAN_FIFOMailBox_TypeDef *to_push, uint8_t bus_number);
|
|
bool can_pop(can_ring *q, CAN_FIFOMailBox_TypeDef *elem);
|
|
|
|
// end API
|
|
|
|
#define ALL_CAN_SILENT 0xFF
|
|
#define ALL_CAN_BUT_MAIN_SILENT 0xFE
|
|
#define ALL_CAN_LIVE 0
|
|
|
|
int can_live = 0, pending_can_live = 0, can_loopback = 0, can_silent = ALL_CAN_SILENT;
|
|
|
|
// ********************* instantiate queues *********************
|
|
|
|
#define can_buffer(x, size) \
|
|
CAN_FIFOMailBox_TypeDef elems_##x[size]; \
|
|
can_ring can_##x = { .w_ptr = 0, .r_ptr = 0, .fifo_size = size, .elems = (CAN_FIFOMailBox_TypeDef *)&elems_##x };
|
|
|
|
can_buffer(rx_q, 0x1000)
|
|
can_buffer(tx1_q, 0x100)
|
|
can_buffer(tx2_q, 0x100)
|
|
can_buffer(tx3_q, 0x100)
|
|
can_buffer(txgmlan_q, 0x100)
|
|
can_ring *can_queues[] = {&can_tx1_q, &can_tx2_q, &can_tx3_q, &can_txgmlan_q};
|
|
|
|
// global CAN stats
|
|
int can_rx_cnt = 0;
|
|
int can_tx_cnt = 0;
|
|
int can_txd_cnt = 0;
|
|
int can_err_cnt = 0;
|
|
int can_overflow_cnt = 0;
|
|
|
|
// ********************* interrupt safe queue *********************
|
|
|
|
bool can_pop(can_ring *q, CAN_FIFOMailBox_TypeDef *elem) {
|
|
bool ret = 0;
|
|
|
|
enter_critical_section();
|
|
if (q->w_ptr != q->r_ptr) {
|
|
*elem = q->elems[q->r_ptr];
|
|
if ((q->r_ptr + 1) == q->fifo_size) q->r_ptr = 0;
|
|
else q->r_ptr += 1;
|
|
ret = 1;
|
|
}
|
|
exit_critical_section();
|
|
|
|
return ret;
|
|
}
|
|
|
|
int can_push(can_ring *q, CAN_FIFOMailBox_TypeDef *elem) {
|
|
int ret = 0;
|
|
uint32_t next_w_ptr;
|
|
|
|
enter_critical_section();
|
|
if ((q->w_ptr + 1) == q->fifo_size) next_w_ptr = 0;
|
|
else next_w_ptr = q->w_ptr + 1;
|
|
if (next_w_ptr != q->r_ptr) {
|
|
q->elems[q->w_ptr] = *elem;
|
|
q->w_ptr = next_w_ptr;
|
|
ret = 1;
|
|
}
|
|
exit_critical_section();
|
|
if (ret == 0) {
|
|
can_overflow_cnt++;
|
|
#ifdef DEBUG
|
|
puts("can_push failed!\n");
|
|
#endif
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
void can_clear(can_ring *q) {
|
|
enter_critical_section();
|
|
q->w_ptr = 0;
|
|
q->r_ptr = 0;
|
|
exit_critical_section();
|
|
}
|
|
|
|
// assign CAN numbering
|
|
// bus num: Can bus number on ODB connector. Sent to/from USB
|
|
// Min: 0; Max: 127; Bit 7 marks message as receipt (bus 129 is receipt for but 1)
|
|
// cans: Look up MCU can interface from bus number
|
|
// can number: numeric lookup for MCU CAN interfaces (0 = CAN1, 1 = CAN2, etc);
|
|
// bus_lookup: Translates from 'can number' to 'bus number'.
|
|
// can_num_lookup: Translates from 'bus number' to 'can number'.
|
|
// can_forwarding: Given a bus num, lookup bus num to forward to. -1 means no forward.
|
|
|
|
// Panda: Bus 0=CAN1 Bus 1=CAN2 Bus 2=CAN3
|
|
CAN_TypeDef *cans[] = {CAN1, CAN2, CAN3};
|
|
uint8_t bus_lookup[] = {0,1,2};
|
|
uint8_t can_num_lookup[] = {0,1,2,-1};
|
|
int8_t can_forwarding[] = {-1,-1,-1,-1};
|
|
uint32_t can_speed[] = {5000, 5000, 5000, 333};
|
|
#define CAN_MAX 3
|
|
|
|
#define CANIF_FROM_CAN_NUM(num) (cans[num])
|
|
#define CAN_NUM_FROM_CANIF(CAN) ((CAN)==CAN1 ? 0 : ((CAN) == CAN2 ? 1 : 2))
|
|
#define CAN_NAME_FROM_CANIF(CAN) ((CAN)==CAN1 ? "CAN1" : ((CAN) == CAN2 ? "CAN2" : "CAN3"))
|
|
#define BUS_NUM_FROM_CAN_NUM(num) (bus_lookup[num])
|
|
#define CAN_NUM_FROM_BUS_NUM(num) (can_num_lookup[num])
|
|
|
|
void process_can(uint8_t can_number);
|
|
|
|
void can_set_speed(uint8_t can_number) {
|
|
CAN_TypeDef *CAN = CANIF_FROM_CAN_NUM(can_number);
|
|
uint8_t bus_number = BUS_NUM_FROM_CAN_NUM(can_number);
|
|
|
|
if (!llcan_set_speed(CAN, can_speed[bus_number], can_loopback, can_silent & (1 << can_number))) {
|
|
puts("CAN init FAILED!!!!!\n");
|
|
puth(can_number); puts(" ");
|
|
puth(BUS_NUM_FROM_CAN_NUM(can_number)); puts("\n");
|
|
}
|
|
}
|
|
|
|
void can_init(uint8_t can_number) {
|
|
if (can_number != 0xff) {
|
|
CAN_TypeDef *CAN = CANIF_FROM_CAN_NUM(can_number);
|
|
set_can_enable(CAN, 1);
|
|
can_set_speed(can_number);
|
|
|
|
llcan_init(CAN);
|
|
|
|
// in case there are queued up messages
|
|
process_can(can_number);
|
|
}
|
|
}
|
|
|
|
void can_init_all(void) {
|
|
for (int i=0; i < CAN_MAX; i++) {
|
|
can_init(i);
|
|
}
|
|
}
|
|
|
|
void can_set_gmlan(int bus) {
|
|
if ((bus == -1) || (bus != can_num_lookup[3])) {
|
|
// GMLAN OFF
|
|
switch (can_num_lookup[3]) {
|
|
case 1:
|
|
puts("disable GMLAN on CAN2\n");
|
|
set_can_mode(1, 0);
|
|
bus_lookup[1] = 1;
|
|
can_num_lookup[1] = 1;
|
|
can_num_lookup[3] = -1;
|
|
can_init(1);
|
|
break;
|
|
case 2:
|
|
puts("disable GMLAN on CAN3\n");
|
|
set_can_mode(2, 0);
|
|
bus_lookup[2] = 2;
|
|
can_num_lookup[2] = 2;
|
|
can_num_lookup[3] = -1;
|
|
can_init(2);
|
|
break;
|
|
default:
|
|
puts("GMLAN bus value invalid\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (bus == 1) {
|
|
puts("GMLAN on CAN2\n");
|
|
// GMLAN on CAN2
|
|
set_can_mode(1, 1);
|
|
bus_lookup[1] = 3;
|
|
can_num_lookup[1] = -1;
|
|
can_num_lookup[3] = 1;
|
|
can_init(1);
|
|
} else if (bus == 2) {
|
|
puts("GMLAN on CAN3\n");
|
|
// GMLAN on CAN3
|
|
set_can_mode(2, 1);
|
|
bus_lookup[2] = 3;
|
|
can_num_lookup[2] = -1;
|
|
can_num_lookup[3] = 2;
|
|
can_init(2);
|
|
}
|
|
}
|
|
|
|
// CAN error
|
|
void can_sce(CAN_TypeDef *CAN) {
|
|
enter_critical_section();
|
|
|
|
#ifdef DEBUG
|
|
if (CAN==CAN1) puts("CAN1: ");
|
|
if (CAN==CAN2) puts("CAN2: ");
|
|
#ifdef CAN3
|
|
if (CAN==CAN3) puts("CAN3: ");
|
|
#endif
|
|
puts("MSR:");
|
|
puth(CAN->MSR);
|
|
puts(" TSR:");
|
|
puth(CAN->TSR);
|
|
puts(" RF0R:");
|
|
puth(CAN->RF0R);
|
|
puts(" RF1R:");
|
|
puth(CAN->RF1R);
|
|
puts(" ESR:");
|
|
puth(CAN->ESR);
|
|
puts("\n");
|
|
#endif
|
|
|
|
can_err_cnt += 1;
|
|
llcan_clear_send(CAN);
|
|
exit_critical_section();
|
|
}
|
|
|
|
// ***************************** CAN *****************************
|
|
|
|
void process_can(uint8_t can_number) {
|
|
if (can_number != 0xff) {
|
|
|
|
enter_critical_section();
|
|
|
|
CAN_TypeDef *CAN = CANIF_FROM_CAN_NUM(can_number);
|
|
uint8_t bus_number = BUS_NUM_FROM_CAN_NUM(can_number);
|
|
|
|
// check for empty mailbox
|
|
CAN_FIFOMailBox_TypeDef to_send;
|
|
if ((CAN->TSR & CAN_TSR_TME0) == CAN_TSR_TME0) {
|
|
// add successfully transmitted message to my fifo
|
|
if ((CAN->TSR & CAN_TSR_RQCP0) == CAN_TSR_RQCP0) {
|
|
can_txd_cnt += 1;
|
|
|
|
if ((CAN->TSR & CAN_TSR_TXOK0) == CAN_TSR_TXOK0) {
|
|
CAN_FIFOMailBox_TypeDef to_push;
|
|
to_push.RIR = CAN->sTxMailBox[0].TIR;
|
|
to_push.RDTR = (CAN->sTxMailBox[0].TDTR & 0xFFFF000F) | ((CAN_BUS_RET_FLAG | bus_number) << 4);
|
|
to_push.RDLR = CAN->sTxMailBox[0].TDLR;
|
|
to_push.RDHR = CAN->sTxMailBox[0].TDHR;
|
|
can_push(&can_rx_q, &to_push);
|
|
}
|
|
|
|
if ((CAN->TSR & CAN_TSR_TERR0) == CAN_TSR_TERR0) {
|
|
#ifdef DEBUG
|
|
puts("CAN TX ERROR!\n");
|
|
#endif
|
|
}
|
|
|
|
if ((CAN->TSR & CAN_TSR_ALST0) == CAN_TSR_ALST0) {
|
|
#ifdef DEBUG
|
|
puts("CAN TX ARBITRATION LOST!\n");
|
|
#endif
|
|
}
|
|
|
|
// clear interrupt
|
|
// careful, this can also be cleared by requesting a transmission
|
|
CAN->TSR |= CAN_TSR_RQCP0;
|
|
}
|
|
|
|
if (can_pop(can_queues[bus_number], &to_send)) {
|
|
can_tx_cnt += 1;
|
|
// only send if we have received a packet
|
|
CAN->sTxMailBox[0].TDLR = to_send.RDLR;
|
|
CAN->sTxMailBox[0].TDHR = to_send.RDHR;
|
|
CAN->sTxMailBox[0].TDTR = to_send.RDTR;
|
|
CAN->sTxMailBox[0].TIR = to_send.RIR;
|
|
}
|
|
}
|
|
|
|
exit_critical_section();
|
|
}
|
|
}
|
|
|
|
// CAN receive handlers
|
|
// blink blue when we are receiving CAN messages
|
|
void can_rx(uint8_t can_number) {
|
|
CAN_TypeDef *CAN = CANIF_FROM_CAN_NUM(can_number);
|
|
uint8_t bus_number = BUS_NUM_FROM_CAN_NUM(can_number);
|
|
while ((CAN->RF0R & CAN_RF0R_FMP0) != 0) {
|
|
can_rx_cnt += 1;
|
|
|
|
// can is live
|
|
pending_can_live = 1;
|
|
|
|
// add to my fifo
|
|
CAN_FIFOMailBox_TypeDef to_push;
|
|
to_push.RIR = CAN->sFIFOMailBox[0].RIR;
|
|
to_push.RDTR = CAN->sFIFOMailBox[0].RDTR;
|
|
to_push.RDLR = CAN->sFIFOMailBox[0].RDLR;
|
|
to_push.RDHR = CAN->sFIFOMailBox[0].RDHR;
|
|
|
|
// modify RDTR for our API
|
|
to_push.RDTR = (to_push.RDTR & 0xFFFF000F) | (bus_number << 4);
|
|
|
|
// forwarding (panda only)
|
|
int bus_fwd_num = (can_forwarding[bus_number] != -1) ? can_forwarding[bus_number] : safety_fwd_hook(bus_number, &to_push);
|
|
if (bus_fwd_num != -1) {
|
|
CAN_FIFOMailBox_TypeDef to_send;
|
|
to_send.RIR = to_push.RIR | 1; // TXRQ
|
|
to_send.RDTR = to_push.RDTR;
|
|
to_send.RDLR = to_push.RDLR;
|
|
to_send.RDHR = to_push.RDHR;
|
|
can_send(&to_send, bus_fwd_num);
|
|
}
|
|
|
|
safety_rx_hook(&to_push);
|
|
|
|
set_led(LED_BLUE, 1);
|
|
can_push(&can_rx_q, &to_push);
|
|
|
|
// next
|
|
CAN->RF0R |= CAN_RF0R_RFOM0;
|
|
}
|
|
}
|
|
|
|
void CAN1_TX_IRQHandler(void) { process_can(0); }
|
|
void CAN1_RX0_IRQHandler(void) { can_rx(0); }
|
|
void CAN1_SCE_IRQHandler(void) { can_sce(CAN1); }
|
|
|
|
void CAN2_TX_IRQHandler(void) { process_can(1); }
|
|
void CAN2_RX0_IRQHandler(void) { can_rx(1); }
|
|
void CAN2_SCE_IRQHandler(void) { can_sce(CAN2); }
|
|
|
|
void CAN3_TX_IRQHandler(void) { process_can(2); }
|
|
void CAN3_RX0_IRQHandler(void) { can_rx(2); }
|
|
void CAN3_SCE_IRQHandler(void) { can_sce(CAN3); }
|
|
|
|
void can_send(CAN_FIFOMailBox_TypeDef *to_push, uint8_t bus_number) {
|
|
if (safety_tx_hook(to_push) != 0) {
|
|
if (bus_number < BUS_MAX) {
|
|
// add CAN packet to send queue
|
|
// bus number isn't passed through
|
|
to_push->RDTR &= 0xF;
|
|
if ((bus_number == 3) && (can_num_lookup[3] == 0xFF)) {
|
|
// TODO: why uint8 bro? only int8?
|
|
bitbang_gmlan(to_push);
|
|
} else {
|
|
can_push(can_queues[bus_number], to_push);
|
|
process_can(CAN_NUM_FROM_BUS_NUM(bus_number));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void can_set_forwarding(int from, int to) {
|
|
can_forwarding[from] = to;
|
|
}
|
|
|
|
|