openpilot_comma/selfdrive/car/hyundai/hyundaican.py

import crcmod
from selfdrive.car.hyundai.values import CAR, CHECKSUM

hyundai_checksum = crcmod.mkCrcFun(0x11D, initCrc=0xFD, rev=False, xorOut=0xdf)


def create_lkas11(packer, frame, car_fingerprint, apply_steer, steer_req,
                  lkas11, sys_warning, sys_state, enabled,
                  left_lane, right_lane,
                  left_lane_depart, right_lane_depart):
  values = lkas11
  values["CF_Lkas_LdwsSysState"] = sys_state
  values["CF_Lkas_SysWarning"] = 3 if sys_warning else 0
  values["CF_Lkas_LdwsLHWarning"] = left_lane_depart
  values["CF_Lkas_LdwsRHWarning"] = right_lane_depart
  values["CR_Lkas_StrToqReq"] = apply_steer
  values["CF_Lkas_ActToi"] = steer_req
  values["CF_Lkas_MsgCount"] = frame % 0x10

  if car_fingerprint in [CAR.SONATA, CAR.PALISADE, CAR.KIA_NIRO_EV, CAR.SANTA_FE, CAR.IONIQ_EV_2020, CAR.IONIQ_PHEV, CAR.KIA_SELTOS, CAR.ELANTRA_2021]:
    values["CF_Lkas_LdwsActivemode"] = int(left_lane) + (int(right_lane) << 1)
    values["CF_Lkas_LdwsOpt_USM"] = 2

    # FcwOpt_USM 5 = Orange blinking car + lanes
    # FcwOpt_USM 4 = Orange car + lanes
    # FcwOpt_USM 3 = Green blinking car + lanes
    # FcwOpt_USM 2 = Green car + lanes
    # FcwOpt_USM 1 = White car + lanes
    # FcwOpt_USM 0 = No car + lanes
    values["CF_Lkas_FcwOpt_USM"] = 2 if enabled else 1

    # SysWarning 4 = keep hands on wheel
    # SysWarning 5 = keep hands on wheel (red)
    # SysWarning 6 = keep hands on wheel (red) + beep
    # Note: the warning is hidden while the blinkers are on
    values["CF_Lkas_SysWarning"] = 4 if sys_warning else 0

  elif car_fingerprint == CAR.HYUNDAI_GENESIS:
    # This field is actually LdwsActivemode
    # Genesis and Optima fault when forwarding while engaged
    values["CF_Lkas_LdwsActivemode"] = 2
  elif car_fingerprint == CAR.KIA_OPTIMA:
    values["CF_Lkas_LdwsActivemode"] = 0

  dat = packer.make_can_msg("LKAS11", 0, values)[2]

  if car_fingerprint in CHECKSUM["crc8"]:
    # CRC Checksum as seen on 2019 Hyundai Santa Fe
    dat = dat[:6] + dat[7:8]
    checksum = hyundai_checksum(dat)
  elif car_fingerprint in CHECKSUM["6B"]:
    # Checksum of first 6 Bytes, as seen on 2018 Kia Sorento
    checksum = sum(dat[:6]) % 256
  else:
    # Checksum of first 6 Bytes and last Byte as seen on 2018 Kia Stinger
    checksum = (sum(dat[:6]) + dat[7]) % 256

  values["CF_Lkas_Chksum"] = checksum

  return packer.make_can_msg("LKAS11", 0, values)


def create_clu11(packer, frame, clu11, button):
  values = clu11
  values["CF_Clu_CruiseSwState"] = button
  values["CF_Clu_AliveCnt1"] = frame % 0x10
  return packer.make_can_msg("CLU11", 0, values)


def create_lfahda_mfc(packer, enabled, hda_set_speed=0):
  values = {
    "LFA_Icon_State": 2 if enabled else 0,
    "HDA_Active": 1 if hda_set_speed else 0,
    "HDA_Icon_State": 2 if hda_set_speed else 0,
    "HDA_VSetReq": hda_set_speed,
  }
  return packer.make_can_msg("LFAHDA_MFC", 0, values)

def create_acc_commands(packer, enabled, accel, idx, lead_visible, set_speed, stopping):
  commands = []

  scc11_values = {
    "MainMode_ACC": 1,
    "TauGapSet": 4,
    "VSetDis": set_speed if enabled else 0,
    "AliveCounterACC": idx % 0x10,
  }
  commands.append(packer.make_can_msg("SCC11", 0, scc11_values))

  scc12_values = {
    "ACCMode": 1 if enabled else 0,
    "StopReq": 1 if stopping else 0,
    "aReqRaw": accel,
    "aReqValue": accel, # stock ramps up at 1.0/s and down at 0.5/s until it reaches aReqRaw
    "CR_VSM_Alive": idx % 0xF,
  }
  scc12_dat = packer.make_can_msg("SCC12", 0, scc12_values)[2]
  scc12_values["CR_VSM_ChkSum"] = 0x10 - sum([sum(divmod(i, 16)) for i in scc12_dat]) % 0x10

  commands.append(packer.make_can_msg("SCC12", 0, scc12_values))

  scc14_values = {
    "ComfortBandUpper": 0.0, # stock usually is 0 but sometimes uses higher values
    "ComfortBandLower": 0.0, # stock usually is 0 but sometimes uses higher values
    "JerkUpperLimit": 1.0 if enabled else 0, # stock usually is 1.0 but sometimes uses higher values
    "JerkLowerLimit": 0.5 if enabled else 0, # stock usually is 0.5 but sometimes uses higher values
    "ACCMode": 1 if enabled else 4, # stock will always be 4 instead of 0 after first disengage
    "ObjGap": 3 if lead_visible else 0, # TODO: 1-5 based on distance to lead vehicle
  }
  commands.append(packer.make_can_msg("SCC14", 0, scc14_values))

  fca11_values = {
    # seems to count 2,1,0,3,2,1,0,3,2,1,0,3,2,1,0,repeat...
    # (where first value is aligned to Supplemental_Counter == 0)
    # test: [(idx % 0xF, -((idx % 0xF) + 2) % 4) for idx in range(0x14)]
    "CR_FCA_Alive": ((-((idx % 0xF) + 2) % 4) << 2) + 1,
    "Supplemental_Counter": idx % 0xF,
  }
  fca11_dat = packer.make_can_msg("FCA11", 0, fca11_values)[2]
  fca11_values["CR_FCA_ChkSum"] = 0x10 - sum([sum(divmod(i, 16)) for i in fca11_dat]) % 0x10
  commands.append(packer.make_can_msg("FCA11", 0, fca11_values))

  return commands

def create_acc_opt(packer):
  commands = []

  scc13_values = {
    "SCCDrvModeRValue": 2,
    "SCC_Equip": 1,
    "Lead_Veh_Dep_Alert_USM": 2,
  }
  commands.append(packer.make_can_msg("SCC13", 0, scc13_values))

  fca12_values = {
    # stock values may be needed if openpilot has vision based AEB some day
    # for now we are not setting these because there is no AEB for vision only
    # "FCA_USM": 3,
    # "FCA_DrvSetState": 2,
  }
  commands.append(packer.make_can_msg("FCA12", 0, fca12_values))

  return commands

def create_frt_radar_opt(packer):
  frt_radar11_values = {
    "CF_FCA_Equip_Front_Radar": 1,
  }
  return packer.make_can_msg("FRT_RADAR11", 0, frt_radar11_values)